Our goal is to provide you with a quick access to the content of the user manual for Sony BRAVIA KDL-40EX1. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Sony BRAVIA KDL-40EX1.
If looking through the Sony BRAVIA KDL-40EX1 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Sony BRAVIA KDL-40EX1 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Sony BRAVIA KDL-40EX1. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
LCD Digital Colour TV
© 2009 Sony Corporation 4-146-428-51(1)
Introduction For Customers in Norway Use of this radio equipment is not allowed in the geographical area Thank you for choosing this Sony product. within a radius of 20 km from the centre of Ny-Ålesund, Svalbard. Before operating the TV, please read this manual thoroughly and retain it for future reference. For Customers in Cyprus The end user must register the TV Wireless system in the The manufacturer of this product is Sony Corporation, 1-7-1 Department of Electronic Communications (P.I. 6
Table of Contents Start-up Guide 4 Safety Information.......................................................................................................................... 12 Precautions..................................................................................................................................... 14 Remote and Unit Controls/Indicators........................................................................................... 15 Watching TV Watching TV....................
Start-up Guide 1: Checking the unit and 2: Connecting an aerial/Set accessories Top Box/recorder (e.g. DVD recorder) to the media Monitor (1) receiver Connecting a Set Top Box/recorder (e.g. DVD recorder) with SCART Media receiver (1) Mains lead for monitor (with ferrite core) (1) Do not remove the ferrite core. Media receiver Mains lead for mains adaptor (1) Mains adaptor for media receiver (1) Scart lead Mains lead holder (1) Screws (PSW 4×8) (2) Remote RMF-ED001W (1) Set Top Box/recorder
Start-up Guide Connecting a Set Top Box/recorder (e.g. DVD recorder) with HDMI 3: Preventing the monitor from toppling over IN Media receiver HDMI cable Set Top Box/recorder (e.g. DVD recorder) ~ � You can also connect equipment to the HDMI input on the left side of the monitor. 1 Install a wood screw (4 mm in diameter, not supplied) in the monitor stand. 2 Install a machine screw (M6 x 12-15, not supplied) into the screw hole of the monitor. 3 Tie the wood screw and the machine screw wit
4: Connecting the mains 5: Performing the initial set- lead up ~ Inserting batteries into the remote � Make sure to secure the mains lead. � To ensure compliance with current EMC Push and lift the cover to open. legislation, ensure the following conditions are met. � Fix the mains lead holder (supplied) after checking the mains lead is in the groove of the mains lead holder (supplied) to avoid scratching the mains lead. 1 ~ � Observe the correct polarity when inserting batteries. � Do not
Start-up Guide POWER button ~ � If the remote does not work, press F/f/G/g/ on the media receiver (page 18) to select the language. The remote registration screen appears. 2 Select “OK” then press . Monitor 2 Check the LINK indicator on the media Next, the Media Receiver Initial Set-up will start. receiver. Please make sure the Media Receiver is on. If wireless communication between the OK media receiver and monitor is established, this indicator lights up. LINK indicator 3 Press F/f to se
6 Press F/f to select “Antenna” or “Cable”, ~ then press . � When a digital broadcast channel cannot be received, or when selecting a country in which If you select “Cable”, the screen for there are no digital broadcasts in step 3, the time selecting the scan type appears. See “To must be set after performing step 7. tune the unit for Cable connection” (page 8). To tune the unit for Cable connection The unit starts searching for all available 1 Press . digital channels, followed by all a
Start-up Guide 4 Press F/f to select “IR Blaster Set-up”, then press . 6: Operating optional The “IR Blaster Set-up” screen appears. equipment using the remote IR Blaster Set-up Connecting IR Blaster to the optional Inputs Type Make Code equipment AV1 - - - AV2 - - - Turn the power of the media receiver off HDMI 1 Blu-ray Disc Sony 1 HDMI 2 - - - before connecting the IR Blaster. HDMI 3 - - - Component - - - Attach the IR Blaster near the remote sensor (
Using optional equipment Item Description For details, refer to the operating instructions 1 BD/DVD �./>: Goes to the supplied with the connected equipment. Some operating beginning of the previous/ buttons may not work depending on the buttons next title/chapter/scene/ connected equipment. track. � / : Replays the scene/ 1 Press HDMI 1, HDMI 2, HDMI 3, AV1, briefly fast forwards the AV2 or COMPONENT. scene. 2 Press EXT. �m/M: Fast reverses/fast forwards the disc when 3 While the EXT bu
Start-up Guide Detaching the Table-Top Attaching the Stand for Stand from the Monitor Media Receiver Disconnect the mains lead from the monitor The media receiver can also be used vertically before detaching the Table-Top Stand. with the supplied stand. 1 Match the lug on the centre of the stand ~ � Remove the screws guided by the arrow marks and the hole on the right side of the media of the monitor. receiver. Do not remove the Table-Top Stand for any reason other than listed below. – To
Ventilation s Never cover the ventilation holes or insert anything in the Safety cabinet. s Leave space around the TV set as shown below. s It is strongly recommended that you use a Sony wall-mount Information bracket in order to provide adequate air-circulation. Monitor Installed on the wall Installation/Set-up Install and use the TV set in accordance with the instructions below 30 cm in order to avoid any risk of fire, electrical shock or damage and/or injuries. 10 cm 10 cm Installation s
When not in use Air circulation is Air circulation is s If you will not be using the TV set for several days, the TV set blocked. blocked. should be disconnected from the mains for environmental and safety reasons. s As the TV set is not disconnected from the mains when the TV set is just turned off, pull the plug from the mains to disconnect the TV set completely. s However, some TV sets may have features that require the TV Wall Wall set to be left in standby to work correctly. For child
s Do not operate this unit near medical equipment (pacemaker, etc.), as malfunction of the medical equipment may result. Precautions s Although this unit transmits/receives scrambled signals, be careful of unauthorised interception. We cannot be responsible for any trouble as a result. Viewing the TV s View the TV in moderate light, as viewing the TV in poor light RF Remote or during long period of time, strains your eyes. s If wireless equipment using the same frequency (2.4GHz band) s Whe
Remote and Unit Controls/Indicators Remote As the unit and the supplied remote communicate by radio frequency, you can operate the unit without aiming the remote at the unit. TV Button Description 1 1 TV "/1 Press to turn the unit on and off from standby HDMI 1 HDMI 2 HDMI 3 EXT (TV standby) mode. 2 COMPO- MONITOR NENT HDMI AV1 AV2 2 EXT Press to operate equipment with the IR Blaster attached, by the remote (page 10). z SYNC MENU 3 � Replace the batteries when the EXT button DIGITAL/ THEATRE
Button Description TV 9 HOME Press to display the media receiver Home menu in the media receiver mode (page 29), HDMI 1 HDMI 2 HDMI 3 EXT COMPO- or monitor Home menu in the monitor mode MONITOR NENT HDMI AV1 AV2 (page 38). 0 Coloured When the coloured buttons are available, an buttons operation guide appears on the screen. SYNC MENU Follow the operation guide to perform a DIGITAL/ THEATRE AUDIO ANALOG selected operation (page 21, 22, 23). qz Number In TV mode: Press to select channels. For
Button Description wj TV wa ANALOG/ Press to display the analogue or digital wf DIGITAL channel that was last viewed. HDMI 1 HDMI 2 HDMI 3 EXT wh COMPO- MONITOR NENT HDMI ws THEATRE You can set Theatre Mode to on or off. When AV1 AV2 Theatre Mode is set to on, the optimum audio wg output (if the unit is connected with an audio system using an HDMI cable) and picture wd SYNC MENU quality for film-based contents are DIGITAL/ ws THEATRE AUDIO ANALOG automatically set. z wa � If you turn the u
Media Receiver Buttons and Unit Indicators Monitor 1 2 3 4 5 67 Media Receiver 2 PROG LINK HOME PROG LINK HOME 7 6 8 9 0 qa qs Item Description 1 Remote control sensor Receives IR signals from the remote (if using an IR remote, not supplied). Do not put anything over the sensor, as its function may be affected. 2 1 (Power) Turns the unit on or off. ~ � To disconnect the unit completely, pull the plug from the mains. 3 Light Sensor Do not put anything over the sensor, as its function may be affe
Item Description 5 (Picture Off indicator) Lights up in green when the picture is switched off (page 43). 6 1 (Standby indicator) Lights up in red when the unit is in standby mode. 7 " (Power indicator) Lights up in green when the unit is turned on. 8 LINK indicator Lights up when the wireless connection between the media receiver and monitor is stable. 9 HOME (HOME) Displays the media receiver Home menu in the media receiver mode (page 29), or monitor Home menu in the monitor mode (page 38).
Watching TV 1 Press 1 on the media receiver or monitor to switch on. Watching TV ~ � When either unit is switched on, the other is 1 also switched on in tandem. When the unit is in standby mode (the 1 (standby) indicator on the unit (front) is red), press TV "/1 on the remote to switch on the unit. 2 Press DIGITAL/ANALOG to toggle between digital mode and analogue mode. The channels available vary depending on the mode. 1 3 Press the number buttons or PROG +/– to select a TV channel. To
|1||Sony 32LX1E||Flat Panel Television||54|
|2||Sony 4-180-179-16(1)||Flat Panel Television||12|
|3||Sony 4-106-868-11(1)||Flat Panel Television||29|
|4||Sony 32EX52X||Flat Panel Television||20|
|5||Sony 32EX42X||Flat Panel Television||11|