Our goal is to provide you with a quick access to the content of the user manual for Sony BRAVIA KDL-52WL135. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Sony BRAVIA KDL-52WL135.
If looking through the Sony BRAVIA KDL-52WL135 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Sony BRAVIA KDL-52WL135 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Sony BRAVIA KDL-52WL135. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
LCD Digital Color TV
© 2007 Sony Corporation
However, there is no guarantee that CAUTION interference will not occur in a particular Owner’s Record Use the following Sony TVs only with the installation. If this equipment does cause The model and serial numbers are located following WALL-MOUNT BRACKET or harmful interference to radio or television at the rear of the TV. Record these TV-stand. reception, which can be determined by turning numbers in the spaces provided below. the equipment off and on, the user is Refer to them whe
Contents Important Safety Instructions ............................4 Using P&P and PIP Features............................25 To Display the Sub Window .........................25 Welcome to the World of BRAVIA™ To Change Inputs or Channels in the Window .....................................................25 The Four Steps to Full HD Experience: Set, To Change the Window Size of P&P............25 Sound, Source, and Setup............................8 To Exit from P&P and PIP ..................
USE Important AC power cord Observe the followings to prevent the AC power cord from being damaged. If the AC power cord is damaged, it may result in a fire or an electric shock. Stop using it and ask your dealer or Sony service center to Safety exchange it. s Do not place the TV where the power cord is subject to wear or abuse. s Do not pinch, bend, or twist the cord excessively. The core lines may Instructions be bared and cut, causing a short-circuit, and resulting in a fire or an elec
Small accessories MAGNETIC INFLUENCE Keep small accessories out of children’s reach. This TV contains a strong magnet in the speaker unit that generates a magnetic field. Keep any items susceptible to magnetic fields away from the speaker. ANTENNAS Outdoor antenna grounding SOUND If an outdoor antenna is installed, follow the precautions below. An If a snapping or popping sound from the TV is outdoor antenna system should not be located in the vicinity of overhead continuous or frequent whi
VENTILATION Objects and ventilation holes Never push objects of any kind into the TV through the The slots and openings in the TV are provided for necessary ventilation. cabinet slots as they may touch dangerous voltage To ensure reliable operation of the TV and to protect it from overheating, points or short out parts that could result in a fire or an these slots and openings must never be blocked or covered. electric shock. Do not place any objects on the TV. Unless proper ventilation is
s Do not install the TV in a location where it may protrude, such as on Broken pieces or behind a pillar, or where you might bump your head on it. Do not throw anything at the TV. Otherwise, it may result in injury. The screen glass may break by the impact and cause serious injury. Preventing the TV from toppling over If the surface of the TV cracks, do not touch it until Take measures to prevent the TV from toppling over and causing injury. you have unplugged the AC power cord. To prevent t
Welcome to the World of BRAVIA™ Thank you for purchasing this Sony BRAVIA™ high-definition television. The quality of the image you see on your BRAVIA TV is only as good as the quality of the signal it receives. To experience the full detail of your new BRAVIA TV, you need access to HD programming. Your BRAVIA TV can receive and display HD programming from: � Over-the-air broadcasting via HD-quality antenna � HD cable subscription � HD satellite subscription � Blu-ray Disc™ Player or other ex
TV Home Menu: XMB (XrossMediaBar) ™ The XMB is a menu of BRAVIA features and input sources displayed on the TV screen. The ™ XMB is an easy way to select programming and adjust settings on your BRAVIA TV. Press the ™ HOME button on your remote control to access the XMB . ™ Product Support Clock/Timers Media Settings Category Bar Sound HOME Screen Video Options TV Category Object Bar From the horizontal Media Category Bar you can control: � Settings: timer, picture, sound, screen and other op
Getting Started 1. Installing the TV Preventing the TV from Toppling Over For details, see page 45. Preparation for Wall-Mounting This TV can be installed on a wall by using a Wall- Mount Bracket (sold separately). Before mounting the TV on a wall, the Table-Top Stand must be removed from the TV. Follow the simple steps below to remove the Table-Top Stand: 1 Disconnect all the cables from the TV. 2 Start removing the screws behind the TV (See illustration below). Do not remove any other scr
Getting Started 2. Locating Inputs and Outputs Left Side 1 VIDEO IN 2 VIDEO L(MONO) 2 AUDIO R IN 2 3 Item Description 1 Headphone jack Connects to your headphones. If your headphones do not match the jack, use a suitable plug adapter (not supplied). ~ � While headphones are connected, the TV speakers are muted. 2 VIDEO IN 2 Connects to the composite video and audio output jacks on your camcorder or other VIDEO/R-AUDIO- video equipment such as a VCR or video game equipment. L (MONO) ~ � If you
9 Rear 12 3 IN 13 L AUDIO AUDIO R 1132 Y 7 X 4 DMe /SERVICE S VIDEO PB DIGITAL OUT 8 VIDEO PR (OPTICAL) L (MONO) L L AUDIO AUDIO AUDIO R R R COMPONENT IN AUDIO OUT VIDEO IN (1080p/1080i/ (VAR/FIX) 720p/480p/480i) 56 q; qa VHF/UHF/CABLE Item Description 1 PC IN Connects to a personal computer’s video output connector using a HD15-HD15 cable (RGB/AUDIO) with ferrite core (analog RGB, not supplied). Can also be connected to other analog RGB equipment. See “PC Input Signal Reference Chart”
Getting Started Item Description 2 HDMI IN 1 HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital HDMI/ audio/video interface between this TV and any HDMI-equipped audio/video equipment, R-AUDIO-L such as a set-top box, DVD player, Blu-ray Disc Player, A/V receiver as well as PC. HDMI supports enhanced, or high-definition video, plus digital audio. 3 HDMI IN 3 If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI HDMI IN 1 (with D
3. Connecting the TV HD Cable Box/HD Satellite Box You can also enjoy high-definition programming Cable System or VHF/UHF Antenna by subscribing to a high-definition cable service or System a high-definition satellite service. For the best possible picture, make sure you connect this You can enjoy high-definition and standard- equipment to your TV via the HDMI or definition digital programming (if available in component video (with audio) input on the back of your area) along with standa
Getting Started Shown with DVI Connection CATV/Satellite antenna cable Rear of TV IN IN 13 1 DVI-to-HDMI HD cable box/ cable HD satellite box L L AUDIO A AU UDIO DIO R R AUDIO-L (white) AUDIO-R (red) Audio cable ~ � If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN 1 (with DVI-to-HDMI cable or adapter) jack and connect the audio jack to the AUDIO IN (L/R) jacks of HDMI IN 1. For details, see page 13. Shown with Component Connection CATV/Satellite ante
PC Use the TV as a monitor for your PC. Shown below with the HD15 to HD15 connection. This TV can also be connected to a PC with DVI or HDMI output. (Refer to the separate Quick Setup Guide.) Rear of TV IN 13 L AUDIO HD15-HD15 AUDIO cable (analog R RGB) Audio cable Connect to an HDMI (stereo mini plugs) compatible PC with an HDMI cable. ~ � If the PC is connected to the TV and no signal has been � Connect the PC IN jack to the PC using the HD15- input from the PC for more than 30 seconds,
Getting Started Other Equipment Digital Blu-ray Personal DVD satellite Digital Disc Player/ Headphones computer player receiver cable box PS3 Audio Personal system computer Rear of TV IN IN 13 13 VIDEO IN 2 VIDEO L AU AUD DI IO O L(MONO) AUDIO R AUDIO R 11 1132 IN 2 Y Y x DMe /SERVICE S VIDEO S VIDEO P PB B VHF/UHF/CABLE DIGIT DIGITA AL L OUT OUT VIDEO VIDEO P PR R (OPTICAL) (OPTICAL) L L (MONO) (MONO) L L L L AU AUD DI IO O AU AUDIO DIO AU AUD DI IO O R R R R R R COMPONENT IN COMPONENT IN A
Using HDMI Control for BRAVIA Bundling the Connecting Cables Theatre Sync™ You can bundle the connecting cables as illustrated below. This TV is equipped with BRAVIA Theatre Sync. The HDMI Control function enables BRAVIA Theatre Sync to allow communication between Sony TV’s and Sony equipment. Only Sony equipment with HDMI Control capability is supported. To Connect HDMI Control Equipment Use an HDMI cable that bears the HDMI logo for connection. See page 17 or see the HDMI connection sh
Getting Started 4. Setting Up the Channel List ~ � If you accidentally turn off the TV during the Initial – Initial Setup Setup process, the Initial Setup will restart from the beginning when the TV is turned back on. The Initial Setup screen appears when you turn �The Auto Program may be canceled while the on the TV for the first time. channels are being scanned. Press RETURN first then press either B/b on the remote control, highlight “Yes” Initial Setup Step 1 of 5 to cancel or “No” to
Using the TV Features Remote Control and TV Controls/Indicators Inserting Batteries into the Remote Control Insert two size AA batteries (supplied) by matching Push and lift the e and E on the batteries to the diagram inside the cover to open. battery compartment of the remote control. Remote Control and TV Controls Buttons located at the top of the TV will operate the same as these buttons on the remote control. 1 2 3 ~ �The 5 button and CH + have a tactile dot. Use them as a reference when
|1||Sony 32LX1E||Flat Panel Television||54|
|2||Sony 4-180-179-16(1)||Flat Panel Television||38|
|3||Sony 4-106-868-11(1)||Flat Panel Television||24|
|4||Sony 32EX52X||Flat Panel Television||20|
|5||Sony 32EX42X||Flat Panel Television||11|