Our goal is to provide you with a quick access to the content of the user manual for Sony KV-27FS100. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Sony KV-27FS100.
If looking through the Sony KV-27FS100 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Sony KV-27FS100 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Sony KV-27FS100. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Connecting Additional Equipment
© 2002 by Sony Corporation
Connecting Additional Equipment WARNING To reduce the risk of fire or electric shock, do not expose the TV To reduce the risk of electric shock, do not use to rain or moisture. this polarized plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted to prevent blade exposure. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ✍ You are cautioned that any changes or modifications not expressly approved in this manual ATTENTION could void your authority to oper
User Guide IMPORTANT SAFEGUARDS For your protection, please read these instructions completely, and Attachments keep this manual for future reference. Carefully observe and Do not use attachments not recommended by comply with all warnings, cautions and instructions placed on the the manufacturer, as they may cause hazards. set, or described in the operating instructions or service manual. Do not place any objects, especially heavy objects, on top of the set. The object may fall WARNING f
Connecting Additional Equipment • Never block the slots and openings by Lightning placing the set on a bed, sofa, rug or For added protection for this television receiver during a lightning other similar surface. storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the receiver due to lightning and • Never place the set in a confined space, power-line surges. such as a bookcase or
Contents Introduction ® Introducing the FD Trinitron WEGA Features................................................................................ 1 About this Manual ............................................................................................................................. 2 Batteries for the Remote Control....................................................................................................... 2 Front Panel Menu Controls..........................................
Introduction ® Congratulations on your purchase of the Sony FD Trinitron WEGA . Before you begin using this manual, please check the model number located on the rear of your TV or on the front cover of this manual. ® Introducing the FD Trinitron WEGA Features Some of the features you will enjoy include: ❏ FD Trinitron Flat CRT — Technologically advanced tube delivers a picture with uncompromising accuracy and outstanding image detail. ❏ Y, PB, PR Inputs — A component video input connection f
Operating Instructions About this Manual This manual provides instructions to help you enjoy your new TV. It shows you how to connect to an antenna or cable, cable box, VCR, DVD, satellite receiver, stereo system, or camcorder. Once you’re connected, follow the instructions and use the remote control to access the on-screen menus. Batteries for the Remote Control Insert two AA (R6) batteries (supplied) into the remote control using the following illustration as a guide. ✍ Under normal condit
Introduction Using the Remote Control ✍ The remote control shown (RM-Y181) is for the models KV-27FS200, KV-32FS200 and KV-36FS200. The remote control for the models KV-27FS100, KV-32FS100, KV-36FS100 (RM-Y180); do not have the yellow labeled PIP function buttons. Button Description 1 MUTING Press to turn off the sound. Press again or press to restore sound. 2 SYSTEM OFF Press to power off the equipment programmed into the A L remote control, see “Programming the Remote Control” on page 3
Operating Instructions Button Description qs POWER buttons Press to turn on and off the TV and other audio/video equipment you have programmed into the remote control. For instructions, see “Programming the Remote Control” on page 39. qd FUNCTION buttons Press to select the equipment (TV, VCR/DVD, SAT/ CABLE) that you want to operate with the remote control. The indicator (LED) lights up momentarily when pushed to show which device the remote control is operating. qf PIP (Picture in Opera
Connecting Your TV Read this section before setting up your TV for the first time. This section covers basic connections in addition to any optional equipment you may be connecting. ✍ The TV rear panels illustrated in this manual are for KV-27FS200, KV-32FS200 and KV-36FS200. The KV-27FS100, KV-32FS100 and KV-36FS100; do not have the AUX input and TO CONVERTER output jack. TV Rear Panel 1 3 4 AUDIO OUT (VAR/FIX) 1 2 3 4 5 67 Jack Description 1AUX This input allows you to view local and cable c
Operating Instructions Jack Description 5 AUDIO L(MONO), R/ This input connects to the AUDIO/VIDEO output jacks on your VCR VIDEO or other video equipment. A third video input jack (VIDEO 2) is located on the front panel of the TV. These AUDIO/VIDEO input jacks provide better picture quality than the VHF/UHF jack. 6 Y, PB, PR/ L(MONO), R This input connects to the component video Y, PB, PR, and AUDIO L(MONO), R jacks on your DVD player or digital set-top box (480i only). 7 AUDIO OUT Conne
Connecting Your TV Basic Connections TV with Indoor or Outdoor Antenna, or CATV Cable Depending on the cable available in your home, choose one of the connections below: (not supplied) ✍ If you are connecting to an indoor or outdoor antenna, you may need to adjust the orientation of the antenna for best reception. 7
Operating Instructions Cable Box Connections Some cable TV systems use scrambled or encoded signals that require a cable box to view all channels. If you subscribe to that kind of cable service, use this connection. Scrambled signals coming in to the TV through the cable box cannot be viewed in PIP. If some of your channels are scrambled, consider using the Cable Box and Cable connection. Cable Box and TV Cable Box 1 Rear of TV From Cable/ Antenna 2 1 Connect the coaxial cable from your cab
Connecting Your TV Cable Box and Cable Use this connection if you subscribe to a cable system that scrambles some channels (pay channels) but not all of them. This setup allows you to use the remote control to: ❏ change channels through your cable box when you are receiving a scrambled signal ❏ change channels through your TV This connection also allows you to use the PIP feature when you are viewing unscrambled channels coming directly into your TV from your cable. Scrambled signals coming t
Operating Instructions Connecting Additional Equipment Connecting a TV and VCR Rear of TV 1 3 4 2 VCR 1 Video (yellow) Audio L (white) Audio R (red) From cable/antenna Optional connection ✍ To watch video programs from your VCR, tune your TV to channel 3 or 4 (as set on the rear of your VCR). 1 Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR. 2 Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV. Option
Connecting Your TV Connecting a TV, VCR, and Cable Box Use this connection if you subscribe to a cable system that scrambles some channels (pay channels), but not all of them. This setup allows you to use the remote control to: ❏ change channels through your cable box or VCR when you are receiving a scrambled signal ❏ change channels through your TV This connection also allows you to use the PIP feature when you are viewing unscrambled channels coming directly into your TV from your cable. Sc
Operating Instructions Optional connection If your VCR is equipped with video outputs, you can get better picture quality by connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV. ✍ For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound; you still must connect the audio cables. Connecting a TV and Satellite Receiver Rear of TV From cable/ 1 3 4 antenna 2 Satellite Receiver 1 Satellite ante
|1||Sony 32LX1E||Flat Panel Television||54|
|2||Sony 4-180-179-16(1)||Flat Panel Television||11|
|3||Sony 4-106-868-11(1)||Flat Panel Television||33|
|4||Sony 32EX52X||Flat Panel Television||20|
|5||Sony 32EX42X||Flat Panel Television||11|