Our goal is to provide you with a quick access to the content of the user manual for Sony Trinitron WEGA KV-SW252. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Sony Trinitron WEGA KV-SW252.
If looking through the Sony Trinitron WEGA KV-SW252 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Sony Trinitron WEGA KV-SW252 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Sony Trinitron WEGA KV-SW252. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Trinitron Color TV
• Before operating the unit, please read this manual thoroughly and retain
it for future reference.
Инструкция по эксплуатации
• Перед работой с устройством внимательно прочтайте инструкцию
и сохраните её для дальнейшего использования.
© 2005 Sony Corporation
01GB01COV-SOEMRus.p65 1 9/5/05, 2:30 PM
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 220 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. • To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediat
Table of Contents Installation Menu Adjustment Securing the TV .................................... 4 Introducing the WEGA GATE navigator ............................................. 15 Getting Started ..................................... 5 “Settings” Adjustment ...................... 16 Setting up your TV (“Initial Setup”) .................................... 6 Changing the “Picture” setting ........ 17 Changing the “Sound” setting ......... 18 Overview of Controls Changing the “Channel Setup
Installation x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 20 mm 3.8 mm screws clamps band Screw the band to the TV stand and to the provided hole at the rear of your TV. or (1) Put a cord or chain through the clamps. (2) Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV. or (1) Attach each end of a cord or chain to the provided holders at the rear of your TV. (2) Secu
Installation b b x Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. Tips • Your TV can receive both TV and FM radio signal from the appropriate connections through the 8 (antenna input) terminal (see page 22). • You can also connect your TV to other optional components (see page 22). Step 3 Plug in the power cord, then
x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Initial Setup” menu will appear. You may change the menu language, preset the TV channels automatically, sort or edit the channels and adjust the picture position using the buttons on the remote control or TV front panel. Press V or v to select the desired menu 1 language, then press . The selected menu language appears. Select Confirm End Press V or v to select “Yes”, then press 2 to preset the channels au
Installation d) If you wish to edit the channels, press to change to edit mode. Press b until the mode that you wish to edit is highlighted: Label, Skip, (block symbol). Then press . 1) To label, press V or v to select the Select Confirm Exit alphanumeric characters for the label. Then press . 2) To skip the program number, press V or v to select “On”. Then press . You can skip this program number when Select Confirm Exit using PROG +/-. 3) To block unwanted program number, press V or v to sel
Overview of Controls x TV front and rear panels TV rear panel qa RL Y CB CR 3 1 WEGA GATE L(MONO)2 R FM PROG qf qd qs TV front panel 9 87 65 4 3 2 1 0 WEGA GATE L(MONO) R FM PROG 2 Button/Terminal Function Page 1 ! Turn off or turn on the TV. 5 2 1 Standby indicator. 5 2 Wake Up indicator. 10 3 Remote control sensor. – 4 PROG +/– Select program number. – 5 2 +/– Adjust volume. – 6t Select TV or video input. 22 WEGA GATE menu operations 4,5 V,v,B,b Select and adjust items. 15 6 Confirm selected i
Overview of controls x Using the remote control and basic functions 0 qa 1 qs A/B 2 qd 1 2 3 6 4 5 qf 7 8 9 0 3 PROG 4 qg 5 qh qj 6 WEGA WEGA GATE RETURN RETURN GATE qk 7 ql 8 w; 9 TV Button Description Page 1 ?/1 Turn off temporarily or turn on the TV. – 2a Display the TV program. – 3 Jump to last program number that has been – watched for at least five seconds. 4 PROG +/– Select program number. – 5 2 +/– Adjust volume. – 8 Change the picture size: – “On” (16:9 wide mode), “Off”. 9 Select surr
continued Button Description Page WEGA GATE menu operations 6 Confirm selected items. 15 7 WEGA GATE Display or cancel the WEGA GATE menu. qj V, v, B, b Select and adjust items. RETURN Return to the previous level. qk Timer operations qg Set TV to turn on automatically according to the – (Wake up timer) desired period of time (max. of 12 hours). The indicator on TV lights up amber once you set the wake up timer. If no buttons or controls are pressed for more than one hour after the TV is turned
Advanced Operations x Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “Custom” option. Selecting the picture mode Press to select the desired picture mode. A/B Select To view 1 2 3 4 5 6 “Vivid” contrast and sharp pictures. 7 8 9 “Standard” normal pictures. 0 PROG “Custom” the last adjusted picture setting from the “Picture Adjustment” option in the menu (see page 17). WEGA WEGA RETURN RETURN GATE GATE TV Selecting th
x Listening to the FM Radio You are able to listen to the FM radio stations using your TV. To access to FM Radio mode: Press WEGA GATE button and select “FM Radio” (see page 15). or Press FM button on the front panel (see page 8). To exit from FM Radio mode: Press WEGA GATE button, select the desired items: “TV” or “External Inputs”, then press . Select the desired TV channel or external inputs and press . or Press FM button on the front panel. Listening to preset stations A/B Access to FM Radio
x Enjoying stereo or bilingual programs You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. When receiving a NICAM program Broadcasting On-screen display (Selected sound) A/B NICAM Mono NICAM t A/B stereo (Regular sound) (Stereo sound) 1 2 3 4 5 6 NICAM NICAM Main NICAM Sub Mono tt bilingual (Main sound) (Sub sound) (Regular sound) 7 8 9 0 PROG NICAM NICAM Main Mono t monaural (Main sound) (Regular sound) When receiving an A2 program WEGA Broa
x Viewing Teletext Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. To Do this display a Teletext Press . Each time you press , the A/B A/B page on the screen changes as follows: TV picture Teletext t Teletext and TV t TV. 1 1 2 2 3 3 If there is no Teletext broadcast, “100” is 4 4 5 5 6 6 displayed at the top left corner of the 7 7 8 8
Menu Adjustment x Introducing the WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs, FM Radio mode and “Settings” menu. TV WEGA GATE TV 01 External Inputs “TV” 02 watch the preset TV FM Radio 03 channels (see page 6) Settings 04 05 Select Select Confirm Confirm End External Inputs 1 Video 1 Video 2 2 “External Inputs” select the inputs for the Video 3 3 connected equipment DVD (see page 22) Select Confirm End FM Radio listen to the
x “Settings” Adjustment You are able to change the settings of your TV from “Settings” in WEGA GATE menu. Press WEGA GATE button to display WEGA GATE menu. Press V or v to select “Settings” and press . The following is an overview of the items that can be adjusted. Picture “Picture” (see page 17) Picture Mode: Vivid “Picture Mode”: “Vivid” “Standard” “Custom” Picture Adjustment Color Temperature: Cool “Picture Adjustment”: “Picture”, “Brightness”, “Color”, “Hue”, Intelligent Picture: On “Sharp
x Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. Press WEGA GATE and select “Settings”. 1 Make sure the “Picture” icon ( ) is Picture 2 Picture Mode: Vivid . selected, then press Picture Adjustment Color Temperature: Cool Intelligent Picture: On Select Confirm End Press V or v to select the desired item (e.g., “Picture Mode”), then press . 3 Select To “Picture Mode” choose either “Vivid”, “Standard” or “Custom”* (see page 11). “Color Temperature” ad
x Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. Press WEGA GATE and select “Settings”. 1 Sound Press V or v to select the “Sound” 2 Sound Mode: Dynamic icon ( ), then press . Sound Adjustment Balance Intelligent Volume: Off Surround: Off Select Confirm End Press V or v to select the desired item (e.g., “Sound Mode”), then press . 3 Select To “Sound Mode” choose either “Dynamic”, “Standard” or “Custom”* (see page 11). “Balance” Press v or B to emphasize t
x Changing the “Channel Setup” setting The “Channel Setup” menu allows you to preset channels automatically, manually preset channels, sort or edit the channels and preset FM radio stations. Press WEGA GATE and select “Settings”. 1 Channel Setup Press V or v to select the “Channel Setup” 2 Auto Program icon ( ), then press . Manual Program Program Sorting/Edit FM Radio Setup Select Confirm End Press V or v to select the desired item (e.g., “Auto Program”), then press . 3 Select To “Auto Program”
continued Presetting channels manually After selecting “Manual Program”, select the program 1 number to which you want to preset a channel. Manual Program Program: 01 TV System: B/G (1) Make sure “Program” is selected, then press . VHF Low Fine: Auto (2) Press V or v until the program number you want Signal Booster: Auto to preset appears on the menu, then press . Select Confirm End Select the desired channel. 2 (1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press . (2) P
|1||Sony 32LX1E||Flat Panel Television||54|
|2||Sony 4-180-179-16(1)||Flat Panel Television||10|
|3||Sony 4-106-868-11(1)||Flat Panel Television||34|
|4||Sony 32EX52X||Flat Panel Television||20|
|5||Sony 32EX42X||Flat Panel Television||11|