Our goal is to provide you with a quick access to the content of the user manual for Sony BRAVIA KDL-V32A11E. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Sony BRAVIA KDL-V32A11E.
If looking through the Sony BRAVIA KDL-V32A11E user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Sony BRAVIA KDL-V32A11E but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Sony BRAVIA KDL-V32A11E. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
LCD Digital Colour TV
Before operating the TV, please read the “Safety
information” section of this manual.
Retain this manual for future reference.
Lesen Sie vor der Inbetriebnahme des Fernsehgeräts bitte
den Abschnitt „Sicherheitsinformationen“ in dieser
Anleitung. Bewahren Sie die Anleitung zum späteren
Avant d’utiliser le téléviseur, lisez attentivement la section
« Consignes de sécuri
WARNING Introduction • To prevent the risk of electric shock, do not insert the plug Thank you for choosing this Sony product. cut off from the mains lead into a socket outlet. This plug Before operating the TV, please read this manual cannot be used and should be destroyed. thoroughly and retain it for future reference. • To prevent the risk of fire or electric shock, do not expose the TV set to rain or moisture. Trademark information • Dangerously high voltages are present inside the TV set
Table of Contents Dual Sound..................................................26 Safety information ....................................... 4 Reset ................................................................26 Precautions ................................................. 7 Screen Control menu.................................27 Disposal of the TV set........................................ 7 Auto Format......................................................27 Overview of the remote .........
• Secure the TV set properly, following the instructions supplied with your stand or wall-mount bracket when installing the TV set. Safety information • Be sure to attach the brackets supplied with your stand. Mains lead Installation • Unplug the mains lead If the TV set is to be installed on a when moving the TV wall, have the installation carried set. Do not move the out by qualified service men. TV set with the mains Improper installation may render lead plugged in. It may the TV s
• When installing the TV set on the wall, leave at least 10 Moisture and flammable objects cm space from the bottom of the TV set. • Do not let this TV set get wet. Never • Never install the TV set as follows: spill liquid of any kind on the TV set. If any liquid or solid object does fall Air circulation Air circulation through openings in the cabinet, do is blocked. is blocked. not operate the TV set. It may result in electric shock or damage to the TV set. Have it checked immediately by
Damage requiring service If the surface of the TV set cracks, do not touch it until you have unplugged the mains lead. Otherwise electric shock may result. Servicing Do not open the cabinet. Entrust the TV set to qualified service personnel only. Small accessories removal and fittable Keep accessories out of children’s reach. If they are swallowed, choking or suffocation may occur. Call a doctor immediately. Broken glass Do not throw anything at the TV set. The screen glass may explode b
Handling and cleaning the screen surface/cabinet of the TV set Precautions The screen surface is finished with a special coating to prevent strong light reflections. LCD Screen To avoid material degradation or screen coating degradation, observe the following precautions. • Although the LCD screen is made with high-precision • Do not push on the screen, scratch it with a hard object, or technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of lig
Overview of the remote 1 TV "/1 – TV standby Switches off the TV temporarily and on from standby mode. 2 Media selector (page 41) Selects which equipment you want to operate. A green light will be momentarily lit to show which one you have selected. 3 ANALOG – Analogue mode (page 15) 4 / – Input select / Text hold • In TV mode (page 21): Selects the input source from equipment connected to the TV sockets. • In Text mode (page 16): Holds the current page. 5 – Screen mode (page 17) 6 Number butt
Overview of the TV buttons and indicators 1 1 – Power Switches the TV on or off. 2 PROG +/-/ / • In TV mode: Selects the next (+) or previous (-) channel. • In TV menu: Moves through the options up () or down (). 3 2 +/-/ / • Increases (+) or decreases (-) the volume. • In TV menu: Moves through the options left ( ) or right ( ). 4 / – Input select/OK • In TV mode (page 21): Selects the input source from equipment connected to the TV sockets. • In TV menu: Selects the menu or option, and c
Getting Started 1: Checking the 2: Inserting batteries accessories into the remote Remote RM-ED001 (1) Size AA batteries (R6 type) (2) Coaxial cable (1) Mains lead (Type C-6) (1) Do not remove these ferrite cores. Cable holder (1) Support belt (1) and screws (2) Notes • Observe the correct polarity when inserting batteries. • Dispose of batteries in an environmentally friendly way. Certain regions may regulate disposal of the battery. Please consult your local authority. • Do not use differen
Getting Started 3: Connecting an aerial/VCR Rear of the TV Coaxial 1 cable (supplied) 3 Mains lead (supplied) Scart lead (not supplied) 2-1 RF lead 2-2 (not supplied) VCR 2 Push the clasp lever in to release the lock and 1 Connect your aerial to the socket on the open the cover, and then insert the cables. rear of the TV. 3 Close the cover until it clicks shut and locks. If connecting to an aerial only Go to step 3. 2 Connect your VCR. 1 Connect the socket on the rear of the TV to the i
4: Preventing the TV from toppling over After all connections are completed, secure the TV. 2 3 1 1 Fasten the supplied support belt to the stand with the supplied screw. 2 Fit the supplied support belt to the TV stand, then firmly fasten with the supplied screw using a screw driver or coin, etc. 3 While supporting the TV, tighten the supplied support belt to adjust the length. 5: Switching on the TV 1 2 1 Connect the TV to your mains socket (220-240V AC, 50Hz). 2 Press 1 on the TV (right side)
Getting Started X U A D V D 2 Press M/m to select the country/region in which you will operate the TV, then press 6: Selecting the OK. language and country/ region When you switch on the TV for the first time, the Language menu appears on the screen. AUX/VIDEO TV DIGITAL ANALOG MODE If the country/region in which you want to use the TV does not appear in the list, select “-” instead of a country/region. The message confirming the TV start auto-tuning 123 appears on the screen, then go to
1 Press OK to select “Yes”. 7: Auto-tuning the TV After selecting the language and country/region, a message confirming the TV start auto-tuning appears on the screen. You must tune the TV to receive channels (TV broadcasts). Do the following to search and store all m available channels. Digital auto-tune display m Analogue auto-tune display The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, please be patient a
Watching TV Watching TV 2 Press DIGITAL to switch to digital mode or Watching TV ANALOG to switch to analogue mode. The channels available vary depending on the mode. 3 Press the number buttons or PROG +/- to select a TV channel. To select channel numbers 10 and above using the number buttons, enter the second and third digits within two seconds. To select a digital channel using the Digital Electronic Programme Guide (EPG), see page 18. In digital mode 1 An information banner appears brie
1 (All)/ (Entertainment)/ (Children)/ To Do this (Art)/ (Sports)/ (News)/ (Movies)/ Return to the Press . (Music): previous channel Lists programmes by category. watched (for more 2 (Only when more than eight channels provide than five seconds) NexTView): Access the Press OK. To select an analogue Creates a channel list. You can store up to eight Programme index channel, press M/m, then press channels. To restore the factory setting channels, table (in analogue OK. select “Auto B”. mod
Watching TV To change the screen mode manually to suit the broadcast Press repeatedly to select Wide, Smart, 4:3, 14:9, or Zoom. Wide Displays wide screen (16:9) broadcasts in the correct proportions. Smart* Displays conventional 4:3 broadcasts with an imitation wide screen effect. The 4:3 picture is stretched to fill the screen. 4:3 Displays conventional 4:3 broadcasts (e.g., non-wide screen TV) in the correct proportions. 14:9* Displays 14:9 broadcasts in the correct proportions. As a
Checking the Digital Electronic Programme Guide (EPG) 1 In digital mode, press to display the Digital Electronic Programme Guide (EPG). 2 Perform the desired operation, as shown in the following table. Note Digital Electronic Programme Programme information will only be displayed if the TV Guide (EPG) station is transmitting it. To Do this Turn off the EPG Press . Move through the EPG Press M/m/,. Display the previous or next six channels Press the red (previous) or green (next) button
Watching TV To Do this Set a programme to be displayed 1 Press M/m/, to select the future programme you want to automatically on the screen when it starts display. – Reminder 2 Press OK. 3 Press M/m to select “Reminder”. 4 Press OK to automatically display the selected programme when the programme starts. Ac symbol appears by that programme’s information. The indicator on the TV (front) lights up in standby mode. Note If you switch the TV to standby mode, it will automatically turn itself
Using the Favourite list 1 In digital mode, press to display the Favourite list. A message appears asking if you want to add channels to the Favourite list when the Favourite list is blank. 2 Perform the desired operation, as shown in Favourite list the following table. To Do this Create your Favourite list for the first time A message appears asking if you want to add channels to the Favourite list when you press for the first time. 1 Press OK to select “Yes”. 2 Press M/m to select the
|1||Sony 32LX1E||Flat Panel Television||54|
|2||Sony 4-180-179-16(1)||Flat Panel Television||35|
|3||Sony 4-106-868-11(1)||Flat Panel Television||13|
|4||Sony 32EX52X||Flat Panel Television||20|
|5||Sony 32EX42X||Flat Panel Television||11|