Summary of the content on the page No. 1
English
DV3750
LCD Display
User's Manual
Welcome
Summary of the content on the page No. 2
English Copyright Copyright BenQ Corporation. All rights reserved. No part of this User's Manual may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation. Dolby, Pro Logic, and the double-D symbol are registered trademarks of Dolby Laboratories. Manufactured under
Summary of the content on the page No. 3
English 7. Ventilation - The vents and other openings in the cabinet are designed to let hot air escape from the display. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the display on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This display is not designed for built-in installation; do not place the product in an enclosed place such as a bookcas
Summary of the content on the page No. 4
English 19. Stand - Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. 20. Careful move - When relocating the product placed on a trolley, it must be moved with the utmost care. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley. 21. Panel protection - The LCD panel used in thi
Summary of the content on the page No. 5
English Table of Contents Introduction............................................................................1 Functions and Features ...................................................................................... 1 Package Contents....................................................................2 Getting Started with Your Display.........................................3 Main Unit (Front View)..................................................................................... 3
Summary of the content on the page No. 6
English Selecting a Picture Mode .................................................................................... 16 Using the Freeze Function.................................................................................. 16 Adjusting Aspect Ratio ....................................................................................... 16 Using the Picture-in-Picture (PIP)/Picture-by-Picture (PBP) Function ........ 16 Using the Sleep Timer ...................................................
Summary of the content on the page No. 7
English Introduction Thank you for purchasing the BenQ DV3750 LCD Display. Your DV3750 will bring you years of high-quality viewing enjoyment. It is also extremely easy to operate, and provides exceptionally high image quality. The DV3750 is also extremely versatile. You can install it on the wall (optional wall-mounting kit is required) or set it on a table, and it can be used under any type of illumination. This manual will explain the operation of the DV3750, including its functions and fe
Summary of the content on the page No. 8
English Package Contents Please ensure that the following items are included with your DV3750 LCD Display. If any item is missing or damaged, contact an authorized dealer immediately. DV3750 LCD Display (x1) User's manual (x1) Power cord (x1) Composite (AV) video cable (x1) AAA batteries (x2) Actual number and type of cables may vary with the location of purchase. 2 Package Contents Remote control (x1)
Summary of the content on the page No. 9
English Getting Started with Your Display Main Unit (Front View) 1 2 No. Name Description • Lights up green when the display is powered on. • Lights up red when the display is in standby mode. 1 Power indicator • Flashes red when the display is connected to a PC and the PC enters standby mode. Remote control Receives the signal from the remote control. Do not put any objects in 2 front of the window in order not to hinder the reception of signals. sensor window Control Panel 5 4 3 2 1 No. Name
Summary of the content on the page No. 10
English • This button allows you to switch among signal sources. 2INPUT • When the OSD (On-Screen Display) menu is on, press this button to enter the submenu. • Press these buttons to sequentially select channels. Channel / 3 • When the OSD menu is on, press these buttons to move the selection button focus up or down or change settings. • Press Volume to increase the volume, or Volume to decrease it. Volume / 4 • When the OSD menu is on, press these buttons to move the selection button fo
Summary of the content on the page No. 11
English Main Unit (Rear View) 12 12 11 10 9 8 7 6 5 4 3 2 1 No. Name Description 1 AUDIO OUT (L/R) Connect the audio input of an amplifier here. Allows you to connect to the SCART output terminal of your DVD 2 AV2 (SCART connector) player or other AV devices. Allows you to connect to the SCART output terminal of your DVD 3 AV1 (SCART connector) player or other AV devices. 4 TV/CATV Antenna Connect your antenna to this input. 5RS232 This terminal is for service purpose only. • VIDEO (Composite
Summary of the content on the page No. 12
English • PC D-SUB (15-pin D-SUB computer signal input): For connecting 9PC to PC's analog video output. • PC AUDIO: For connecting to PC's audio output. • DVI (Digital Video Interface): For connecting to PC's digital video DVI (Digital Video output. 10 Interface) • DVI AUDIO (Audio input, L/R): For connecting to DVI's digital audio output. 11 AC INLET Connect the power cord to this input. 12 Speaker connectors Connect the external speakers to these connectors. Setting up Your Display Connec
Summary of the content on the page No. 13
English Connecting Composite (AV) Video Signal (RCA) Connect the Composite (AV) output of your AV equipment to the Composite (AV3) signal terminal on the display using a Composite (AV) video cable (RCA connector) as illustrated. Composite video input is the most commonly used signal input. However, this type of input also provides a less optimal image quality. Many video sources can only Composite (AV) video cable output Composite video signals, for example, VCRs and camcorders. Other vi
Summary of the content on the page No. 14
English Connecting S-Video Signals 1. Connect the S-Video output of your AV equipment to the display's S-VIDEO terminal using an S-Video cable. Pay attention to the direction of the connector on the S-Video cable when inserting. 2. Connect the audio output of your AV equipment to the display's S-VIDEO AUDIO L/R input terminals using the AV cable or equivalent. S-Video cable Audio (AV) cable An S-video signal provides a higher quality image to that of Composite video. It is recommended
Summary of the content on the page No. 15
English Connecting RGB Signals (Mini D-SUB) 1. Connect the analog video output of your PC to the PC D-SUB terminal on the display using a Mini D-SUB 15-pin cable. 2. Connect the audio output of your PC to the display's PC AUDIO input terminal using an appropriate cable. 1. If the signal resolution is greater than the default resolution, the screen may be unable to display image details clearly. 2. You will need a converter to connect a Macintosh computer video to the display using a PC
Summary of the content on the page No. 16
English Connecting Audio Output Signals DV3750 provides extra audio output termi- nals for delivering audio signal to an amplifier or other audio devices. Connect the AUDIO OUT L/R terminals on the display to the signal input terminals of an amplifier or other audio devices using the AV Audio (AV) cable cable or equivalent. Connecting the Power Cord 1. Connect the female end of the AC power cord to the AC input on the display. 2. As shown in the diagram, connect the male end to a wall power
Summary of the content on the page No. 17
English Initial Setup 1. Check to make sure that all connections to your display are correct and firm. 2. Press the Power button on the display. The display will turn on. The following First Turn On screen will appear. 3. Press the Volume or Volume buttons on the display to select a screen display language, and then press the Channel button on the display to go to the next step. 4. Press the Volume or Volume buttons on the display to select your country, and then press the Channel button o
Summary of the content on the page No. 18
English Remote Control Below is the function description for each button on your remote control. 1. (Power) Press this button to power on the display. Press again to put the display to standby mode. 2. (Input) Press this button to select your desired input source. 3. (Backlight) Press this button to adjust screen backlight. 4. (Information) Press this button to display the TV channel message and other signal messages (including video or computer signals). 5. (Sleep timer/Teletext page selecti
Summary of the content on the page No. 19
English 13. (Teletext) Press this button to turn on the Teletext function. press this button again to turn it off. 14. PIP/PBP Press this button to simultaneously view signals from two different sources on the screen.You may choose picture-in- picture (PIP) mode or picture-by-picture (PBP) mode. 15. / / / and OK • : Press the or buttons to select settings. • : Press the or buttons to adjust OSD menu set- tings. • Press OK to execute selections, or to enter a submenu you have selected.
Summary of the content on the page No. 20
English Using the Remote Control When using the remote control, aim it at the remote control sensor window on the display. If there is an object between the remote control and the signal remote control sensor window on the display, the remote may not operate. When using the remote control, please note: • Do not strike or drop the remote. Do not expose the remote control to liquids and do not place it in humid environments. • Do not install or place the remote control in direct sunlight. The he
