Summary of the content on the page No. 1
LCD TELEVISION
INSTRUCTION MANUAL
DLP-2612
DLP-3212
PAL B/G , D/K, I/I,
SECAM B/G , D/K, L/L’, NTSC(AV)
TELETEXT
SCART/VIDEO/S-VIDEO/COMPONENT/PC/DVI-D
MULTI-LANGUAGE OSD
Help line Number: 0870 100 2525
Summary of the content on the page No. 2
Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to consti- tute a risk electric shock. T he exclamation point wi
Summary of the content on the page No. 3
Safety Precautions 1. CLEANING Unplug this TV equipment from the AC power outlet before cleaning. Do not use liquid cleaner or aerosol cleaners. Use a soft and damp cloth for cleaning. 2. ATTACHMENTS Do not use attachments not recommended by the TV equipment manu- facturer as they may result in the risk of fire, electric shock or other injury. 3. WATER AND MOISTURE Do not place this TV equipment near water, for example, near bathtub, kitchen sink, laundry tub, in a wet basement, or near a swimm
Summary of the content on the page No. 4
Contents Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Functional Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front(Control Panel) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 5
Important Safeguards Location Heat, Moisture, Dust, Vibration Position your set so that bright light or sunlight doesn’t fall directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Do not expose the set to dripping or splashing. Ventilation Also ensure that the set is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover. Leave at least 10 cm around each side of the TV set. Mou
Summary of the content on the page No. 6
NR . Supplied Accessories Make sure that the following accessories are provided with the product. AC cord Instruction manual POWER STILL RECALL LOCK SLEEP EDIT SOUND MODE PICTURE ASPECT PREV PR MENU PIP POSTION SWAP INPUT Remote controller Batteries (Option) (2 x 1,5V, AAA) 6 MGDI MUT L IMEDIA
Summary of the content on the page No. 7
MENU PR ON/OFF Functional Overview Front TIMER : Lights up red in Stand-By mode and Lights up green in TV on mode. When TV is Child Lock mode, LED will cycle through red / green. TIMER : When On time/Off time in time setting mode is selected, the LED is red. Remote Sensor : Receives signals from the remote controller. Side Button : Each time you press this button, the TV will cycle through: TV / Video1 / Video2 / Video3(S-Video) / Component 1 / Component 2 /
Summary of the content on the page No. 8
NR . Functional Overview Remote Controller 1. (MUTE) : Press this button, and the sound goes off. POWER Press again, and the sound returns. 2. (POWER) : TV on/off button in Stand-By mode. STILL RECALL Note: When the current state is ST-BY, you turn on the TV using the digit key 3. STILL : Press this button to freeze the picture. 4. RECALL : The present modes(TV, Video, Component, LOCK SLEEP PC) and Signal information for 4 seconds. SOUND EDIT MODE In TV mode, the Programme number, Signal, PI
Summary of the content on the page No. 9
NR . Functional Overview Remote Controller 12. ASPECT : Select screen aspect ratio : 16:9 / Zoom1 / Zoom2 / Panorama / Auto / 4:3 POWER 13. PREV PR : Previous PROGRAMME button. STILL RECALL 14. MENU : Menu display button. 15. : Each time you press this button, the TV will cycle through: TV / Video1 / Video2 / Video3(S-Video) 16. MULTIMEDIA : Each time you press this button, the TV LOCK SLEEP will cycle through: SOUND Component 1 / Component 2 / PC RGB / DVI EDIT MODE 17. ▼PR▲: Change chann
Summary of the content on the page No. 10
Preparation Inserting Batteries into the Remote Control Unit To load the batteries, turn the remote control handset over and open the battery compartment. Insert the batteries (Two 1.5v, type R03 or AA). Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment. Note: To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time. Mains Connection 1. Connect the AC plu
Summary of the content on the page No. 11
Preparation Aerial Connection with VCR Connect your aerial cable to the RF(aerial) IN terminal on the VCR. Connect the RF OUT terminal of the VCR to the Aerial terminal on the TV set with RF cable. NOTE: I f you wish to use only the Aerial (RF) connection to match the VCR, then you should store the VCR channel on the TV to programme number “ZERO” using the “Manual tuning” function (See page 20). Now you can watch the VCR in TV mode by selecting the pro- gramme number “PR00” . VCR RF IN RF OU
Summary of the content on the page No. 12
Preparation Connecting PC(15Pin D-SUB) 1. Prepare the PC cable (D-sub 15pin) and the PC audio cable(Sold separately). 2. Connect the PC(Output) to the LCD(Input) as shown below. 3. Turn on the LCD and PC. 4. INPUT SELECT : Select [PC] by pressing the “MULTIMEDIA” button of the Remote Control or LCD unit. Each time you press the “MULTIMEDIA” button, a different input mode appears. The sequence is as follows: Component1 > Component2 > PC RGB > DVI > Component1 Audio cable D-sub 15pin PC LCD TV
Summary of the content on the page No. 13
Preparation Connecting DVI 1. Prepare the DVI cable and the PC audio cable(Sold separately). 2. Connect the PC(Output) to the LCD(Input) as shown below. 3. Turn on the LCD and PC. 4. INPUT SELECT : Select [DVI] by pressing the “MULTIMEDIA” button of the Remote Control or LCD unit. Each time you press the “MULTIMEDIA” button, a different input mode appears. The sequence is as follows: Component1 > Component2 > PC RGB > DVI > Component1 DVI cable Audio cable PC LCD TV This set offers a variety
Summary of the content on the page No. 14
Preparation Connecting Component or VIDEO or S-VIDEO from a DVD 1. Prepare the AV cable. 2. Connect the DVD(Output) to the LCD(Component or Video Input) as shown below. 3. When connecting to an external AV source, be sure to match the colors. 4. Turn the LCD and the DVD ON. 5. Select [Component 1 or Component 2, Video1, Video2, Video3] by pressing the “MULTIMEDIA” or button of the Remote Control or the „INPUT SELECT” Key in KeyPad of the LCD set. 6. Each time you press the “MULTIMEDIA” or “
Summary of the content on the page No. 15
Preparation NOTES: 1) Y/Cb/Cr, which stands for DVD Player’s Output Terminal, can also be written as Y/B-Y/R-Y, Y/Pb/Pr depending on the kinds of DVD devices. 2) The way of connecting the DVD to the LCD is as follows: Y <---> Y Cb <---> Pb, B-Y, Cr <---> Pr, R-Y 3) The DVD output can be Video, S-Video and/or Component Video depending on the DVD devices. There are various output modes, so be sure to check when you purchase it. 4) When connecting S-Video and Video3 simultaneously, only S-Vid
Summary of the content on the page No. 16
Preparation Source Mode Selection Press the AV button on the TV control panel repeatedly to select the source. You can also select the source using AV button or Multimedia button on the remote controller. AV button on the control panel : TV > Video1 > Video2 > Video3(S-Video) > Component1 > Component2 > PC RGB > DVI > TV AV button on the remote controller : TV > Video1 > Video2 > Video3(S-Video) > TV Multimedia button on the remote controller : Component1 > Component2 > PC RGB > DVI > Component1
Summary of the content on the page No. 17
DVD or DTV Set-Top Box Input Jack (Component1, Component2) These jacks have Y/Pb(Cb)/Pr(Cr) inputs and Audio inputs. These jacks are used to connect a DVD player, DTV Set-Top Box. (Available input mode : 480i, 480p, 576i, 576p, 720p 60Hz, 720p 50Hz, 1080i 50Hz, 1080i 60Hz) Headphone Input Jack Insert the headphone plug (3.5 mm ) into this jack. The sound from the speaker will be automatically cut off. You can control the headphone sound with the Volume Up/Down button. * Headphones are not includ
Summary of the content on the page No. 18
Installation Language Menu 1. When you turn on the TV set for the first time, the Language menu appears as the on-screen Picture Background Opaque display. Sound Language If not, (1) Press the MENU button to call up the menu. Screen Child Lock On (2) Move the selection bar to the Feature CH Install Time Setting menu with ▼PR▲buttons. (3) Press the VOL ► button. Features MGDI On (4) Move the selection bar to the Language Move Adjust Menu:Save with ▼PR ▲buttons. 2. Press the ◄VOL ► butto
Summary of the content on the page No. 19
Installation Channel Edit Select the Channel Edit menu from the Install menu. Picture Auto Tuning Moving the programme Sound Edit 1. Select the programme to move with the Screen Manual ▼PR ▲ buttons. 2. Press GREEN button and the selected CH Install Fine Tune programme is highlited. Features 3. Using the ▼PR ▲ buttons, select programme you want to change. Move Select Menu:Save 4. Press Green button and the programme will be moved. Skipping the programme 1. Select the programme to skip w
Summary of the content on the page No. 20
Installation Manual Tune 1. Press the ▼PR ▲ buttons to select a programme number you want. Picture Auto Tuning 2. Select the Manual from the Install menu. Sound Edit 3. Press the VOL► button and the manual tuning window appears. Screen Manual 4. Press the ◄VOL ► buttons to search up or CH Install Fine Tune down. 5. Searching will be stopped automatically after Features finding the next channel. Move Select Menu:Save 6. When a new channel is found, a channel memorizing window will app
