Summary of the content on the page No. 1
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION
TM
EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.
19” Digital LCD TV
Owner’s Manual
LC195EM9 B
LC195EM9 2
LC195EM9
HIGH-DEFINITION TELEVISION
TO RECEIVE DIGITAL/ANALOG SIGNAL,
YOU MUST CONNECT ANTENNA.
© 2008 Funai Electric Co., Ltd.
A A8AN5UH_A8AN3UH_A8AN1UH_EN.indd 1 8AN5UH_A8AN3UH_A8AN1UH_EN.indd 1 2 2008/03/05 15:48:32 008/03
Summary of the content on the page No. 2
NTRODUCTION I The model and serial numbers of this unit may be found on the cabinet. Model No.: You should record and retain those numbers for future reference. Serial No.: Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. The lightning flash with arrowhead symbol, within an CAUTION
Summary of the content on the page No. 3
PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION INTRODUCTION This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 2.8 inches (7cm) or more around this apparatus. Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only
Summary of the content on the page No. 4
f f r r o o n n t t s s i i d d e e NTRODUCTION I Supplied Accessories owner’s manual remote control batteries (1EMN23319) (NF606UD) (AA x 2) • If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual. • Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local electronics store for these items. Attachi
Summary of the content on the page No. 5
PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION INTRODUCTION Features Contents • DTV/TV/CATV INTRODUCTION - You can use your remote control to select Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 channels which are broadcast in digital format and Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 conventional analog f
Summary of the content on the page No. 6
NTRODUCTION I Buttons on the Remote Control 1. POWER (p. 12) 12. INFO (p. 16) Digital Mode (DTV) Press to turn the unit on and off. • Press to display the channel 2. MUTE (p. 14) 1 11 information, signal type and TV Press to turn the sound on and off. 2 setting. 3. SLEEP (p. 14) 12 Analog Mode (TV) 3 13 Press to activate the sleep timer. • Press to display the channel 4. Number buttons (p. 14) number, signal type and TV 14 • Press to select channels. 4 setting. - (hyphen) External In
Summary of the content on the page No. 7
PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION INTRODUCTION Control Panel 1. POWER y (p. 12) side of this unit Press to turn the unit on and off. 2. INPUT SELECT/ENTER (p. 15) • Press to switch the input modes. 1 • Press to confirm your selection. 2 K L 3. CH. / (p. 14) Press to select channels or move up/down through the 3 main menu items. X Y 4. VOL. / (p. 14) Press to adjust the volume or move right (X)/left (Y) 4 through the main menu items. 5. S
Summary of the content on the page No. 8
REPARATION P Cables not included. Please purchase the necessary cables at your local store. Basic Connection This section describes how to connect the unit to an antenna, cable/satellite box, etc. Note: • Be sur e your antenna or other device is connected properly before plugging in the power cord. [Antenna Connection] Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit. e.g.) VHF / UHF rear of this unit antenna RF coaxial cable or cable TV company * Once c
Summary of the content on the page No. 9
INTRODUCTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION PREPARATION Cables not included. Please purchase the necessary cables at your local store. External Device Connection [Component Video Connection] RCA component video connection offers better picture quality for video devices connected to the unit. Use an RCA component video cable to connect the unit to external video devices equipped with component video output jacks. If you connect to the unit’s component v
Summary of the content on the page No. 10
REPARATION P Cables not included. Please purchase the necessary cables at your local store. [Video Connection] RCA video connection offers standard picture quality for video devices connected to the unit. Use an RCA video cable to connect the unit to external video devices equipped with video output jack. If you connect to the unit’s video input jack, connect an RCA audio cable to the audio L/R jacks of VIDEO 1. When the audio jack of the video device is monaural, connect an RCA audio cable to t
Summary of the content on the page No. 11
INTRODUCTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION PREPARATION Cables not included. Please purchase the necessary cables at your local store. [PC Connection] This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a computer monitor. e.g.) VGA cable should be rear of this unit with ferrite core. VGA cable mini-plug audio cable VIDEO 2 COMPONENT AUDIO Y Pb Pr L R VIDEO 1 AUDIO personal computer S-VIDEO VIDEO LR
Summary of the content on the page No. 12
NITIAL SETTING I These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Note: Initial Setup • If you connect the cable system directly, contact the CATV This section will guide you through the unit’s initial setting which includes installer. selecting a language for your on-screen menu and auto channel scan, • If you press [POWER] or [SETUP] during auto channel which automatically scans and memorizes viewable channels. scan, this setting
Summary of the content on the page No. 13
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION INITIAL SETTING Note: Auto Channel Scan • After setting “Auto Channel Scan”, using [CH. K / L] on the If you switch wires (e.g., between antenna and CATV) or if you move the remote control skips unavailable programs automatically. unit to a different area after the initial setting, or if you restore the DTV • If you connect the cable system directly, contact the CATV channel you deleted, you will need to perfo
Summary of the content on the page No. 14
ATCHING TV W Channel Selection Volume Adjustment Select channels by using [CH. K / L] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. Use [CH. K / L] or [the Number buttons] to select the Use [VOL. X/ Y] to adjust the audio volume. memorized channels. Volume 20 or or or • The volume bar will be displayed at the bottom of the TV screen when adjusting the volume. • The volume bar will a
Summary of the content on the page No. 15
INTRODUCTION PREPARATION INITIAL SETTING OPTIONAL SETTING TROUBLESHOOTING INFORMATION WATCHING TV Still Mode Switching Audio Mode You can pause the image shown on the TV screen. This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode. TV Press [STILL] to pause the image shown on the TV Press [AUDIO ] to display the currently selected screen. 1 audio mode. While receiving an MTS broadcast, press repeatedly to cycle through
Summary of the content on the page No. 16
ATCHING TV W Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. DTV TV In the digital mode, the detailed broadcasting information for the current In the analog mode, the current channel number and the audio mode are channel such as program title, program guides are displayed. displayed. Press [INFO ] to display the details of the currently Press [INFO ]. selected program. 6 SAP / STEREO 480i 480i SD SD 4:3 4:3
Summary of the content on the page No. 17
INTRODUCTION PREPARATION INITIAL SETTING OPTIONAL SETTING TROUBLESHOOTING INFORMATION WATCHING TV TV Screen Display Mode 3-5 types of display modes can be selected when the unit receives 4:3 / 16:9 video signal or PC input signal. Press [SCREEN MODE ] repeatedly to switch the TV aspect ratio. For 4:3 video signal For 16:9 video signal Wide Full Expand (digital mode) Sidebar Wide Side Cut Cinema (analog / external input mode) Zoom Cinema Full Full Sidebar Select to display a 16:9 picture
Summary of the content on the page No. 18
ATCHING TV W For PC input signal Full Select to display a picture to fill the screen. Dot By Dot Select to display a picture in its original size. Note: A B * * Normal Normal • You may not switch the display mode depending on the program or resolution. • You can change the screen resolution on your PC. Full Dot By Dot A * Normal Select to display a vertically stretched picture without distorting the aspect ratio. The black bars appear on the left and right sides of the screen. B * Normal
Summary of the content on the page No. 19
INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV TROUBLESHOOTING INFORMATION OPTIONAL SETTING PTIONAL SETTING O Channel List Manual Register The channel list function lets you remove undesired channels from the The manual register function lets you add the channels that were not added channel registration list. by the auto channel scan due to the reception condition at the initial setting. Press [SETUP] to display the main menu. Press [SETUP] to display the main menu. 1 1 Use [Cur
Summary of the content on the page No. 20
PTIONAL SETTING O Antenna Confirmation DTV This function lets you check the digital signal strength of each channel. Press [SETUP] to display the main menu. 1 Use [Cursor K/ L] to select “CHANNEL”, then press 2 [ENTER]. or Use [Cursor K/ L] to select “Antenna”, then press 3 [ENTER]. Channel Channel Autoscan or Channel List Manual Register Antenna Use [the Number buttons] or [CH. K/ L] to select the 4 channel for which you want to check the digital signal strength. 11-1 A
