Our goal is to provide you with a quick access to the content of the user manual for Haier L1510B-A. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Haier L1510B-A.
If looking through the Haier L1510B-A user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Haier L1510B-A but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Haier L1510B-A. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
LCD TV RECEIVER
L1509-A, L1510A-A, L1510B-A,
Please read this manual carefully before
L1709-A, L1910A-A, L1910B-A,
using your television and keep this manual
L2009-A, L1911W-A, L2011W-A
In a good place for future reference.
To users: Thank you for using our LCD-TV. Before connecting the LCD-TV and turning the power on, please read this book carefully. Please keep this book for later use. When it was loss of function by electrostatic shock, please switch the on/off button for restoring the function. CONTENT Safety Notice Items................................................................................... 1 Front Panel Controls..................................................................................
Safety Notice Items Incorrect usage will cause fire or electric shock. To prevent this, please do as required when you are installing, using and cleaning this machine. To insure your safety and extend the life-span of LCD-TV, please read the following items carefully before using: l Please read and understand all the instructions before operation; l Please keep the book for later use; l Please comply with the warning instructions on the machine and in this book strictly; l Please comply with
Front Panel Controls L1509-A, L1709-A, 2 3 4 5 1 L2009-A TV/AV MENU VOL- VOL+ CH- CH+ POWER L1911W-A,L2011W-A 6 6 7 7 2 3 4 5 1 L1510B-A,L1910B-A, L1510A-A,L1910A-A, TV/AV MENU VOL- VOL+ CH- CH+ POWER 7 6 6 7 Control Panel Function 1. Power supply switch 2.TV/AV Select the input signals: COMPONENT/PC/AV/SV/TV 3. MENU Press to select the main menu 4. VOL- Volume down / Left orientation to adjust the item in the OSD VOL+ Volume up /
Pr Pb Y R L V ANT IN PC AUDIO IN AUDIO IN VIDEO IN S-VIDEO COMPONENT IN VGA IN Connection Options The figure is just for reference, please see the real. The terminals of 09 series are opposite to the above. And the AC power supply switch is on the back of the set) AV /S-VIDEO/COMPONENT Audio Input Connect audio output from an external device to this jack COMPONENTInput Connect a component video/audio device to these jacks Earphone port Pr Pb Y R
Remote Control Key Functions When using the remote control, aim it Buttons on the remote control towards the remote sensor on the TV Stand By MUTE Display current input signal information TV channel number select SLEEP DISPLAY MUTE POWER Set time to change the TV into the standby status after a period of preset NICAM PC AUTO AD TV/AV time.(time is 240/180/120/90/60/45/30/15/OFF) NICAM/A2 Stereo select EXIT Quick TV channel switch(return to the last channel) Volume down/up Left/right orienta
Remote Control Installing Batteries 1.Slide open the cover of the battery compartment on the back of the remote control. 2.Load two 5# alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. 1 2 3 Precautions As strong light may interfere the Make sure that there is no signals, change your position to obstacle between the remote operate the remote controller if controller and television set. the television ca
Connection Instructions Grounding Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. External Equipment Connections Antenna Connection - Antenna or Cable Service with a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. Mul
Connection Instructions PC Setup You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD VGA IN -TV and the PC are off; 3.Connect a D type 15-pin VGA interface cable ( not supplied ) to the VGA video interface connector on the PC. Then connect the other end to the VGA video i
Connection Instructions COMPONENT (If connected to SVIDEO,select the SV external input source.) 3. Refer to the DVD player's manual for operating instructions. Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV Connection and use steps: 1.Read the user guide supplied with your AV devices and ensure that it has Composite o
Connection Instructions Cable TV Setup - After subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV. - For further information regarding cable TV service, contact your local cable TV service provider(s). Connection Option 1 1. Select 3 or 4 with channel switch on cable box. 2. Tune the TV channel to the same selected output channe
Basic Operating Instructions Turn on the LCD-TV SLEEP DISPLAY M U TE P O W E R Switch on the power button on the back of the set and the TV N IC A M P C AUTO AD TV/AV will in standby mode. When the POWER button on the remote control is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the POWER button, the PSM .S S M LCD-TVwill go into standby mode and the indicator light turns O K Q .V IE W re
Basic Operating Instructions Select the TV Channel You Want You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 100 channels , and you can press the keys on the remote control or on the panel to make a selection. 1.Press the relevant key on the remote control if you want to choose any channel from 0 to 9. for example: if you want to choose channel 8, just press the key number 0 and 8. Note: You must press 0 first and then the other
Menu Operations * In this manual, the OSD (On Screen Display) may be different from your TV s because it is just an example to help you with the TV operation. Press TV/AV to select the input source, and the menu in the different source is different . 1. Press MENU button to display the main menu, and V+/V-to select the main menu . 2. Press P+/P- to scroll through the parameters 3. Press V+/V- buttons to make changes to the parameters 4. Press the OK button to exit the menu Picture
Menu Operations Picture Menu Options Continued 2. Press P+/P- button to enter the picture menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired picture quality has been achieved . Function: BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it will add more light to dark parts of the picture and by decreasin
Menu Operations Audio Menu Options Continued You can adjust sound options to the levels you prefer. 2. Press P+/P- button to enter the audio menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired sound quality has been achieved .. Function : VOLUME : Adjust the volume of your TV BALANCE : Adjust the balance of the audio output from
Menu Operations Function Menu Options Menu Language Selection: The menus can be shown on the screen in the selected language. First select your language. 1. Press MENU and V+/V- button until the following menu appears on the screen 2. Press P+/P- button to select LANGUAGE. 3. Press V+/V- button to select your desired language. From this point on, the on-screen menus will be shown in the language of your choice. FUNCTION INPUT SOURCE TV LANGUAGE
Menu Operations Function Menu Options Continued 2. TXT LANGUAGE: To switch the teletext languages. 3. TXT EAST/WEST: To select EAST or WEST 4. DISPLAY MODE:To select the display mode between 4:3 and FULL SCREEN.. 5.BLUE SCREEN:To set On, the screen will be in blue screen after 3 seconds if there is no signal. 6. RESET : Press V+ to reset some settings to the factory default . Note: The TXT LANGUAGE and TXT EAST/WEST have relation to the inputs. Adjust Menu Options 1. Press MENU and V+/V- butto
Menu Operations Tuning Menu Options 1. Press MENU and V+/V- button until the following menu appears on the screen TUNING CHANNEL 1 COLOR SYSTEM AUTO SOUND SYSTEM DK SKIP OFF AFC ON FINE TUNE EXCHANGE MANUAL SEARCH AUTO SEARCH Note: This menu is o
Menu Operations Tuning Menu Options Continued 7. EXCHANGE : Press V+ to display the menu as follows: EXCHANGE FROM : 1 TO : 9 EXCHANGE Press P+/- to select the item and then V+/- to adjust the channel and V+ to confirm.( For example: press P+/- to select FROM item, and then press V+/- to adjust the channel number to 1 and the current channel will change with thechannel number changed; then Press P+/- to select TO item,and V+/- t
|1||Haier 1509-A||Flat Panel Television||166|
|2||Haier 42EP24STV||Flat Panel Television||76|
|3||Haier 20AL25S||Flat Panel Television||22|
|4||Haier 42HP25SAT||Flat Panel Television||33|
|5||Haier 42EP25BAT||Flat Panel Television||13|