Our goal is to provide you with a quick access to the content of the user manual for Haier P50K1. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Haier P50K1.
If looking through the Haier P50K1 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Haier P50K1 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Haier P50K1. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
PLASMA TELEVISION OWNER`S MANUAL MODELS: P37K1 P42K1 P50K1 Please READ this manual carefully before operating your TV, and retain it for future reference.
Congratulations on your purchase, and welcome to the "" family ! Dear Haier product owner: Thank you for your confidence in Haier. You`ve selected one of the best-built, best-backed products available today. We`ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Haier "" family, you`re entitled to protect by one of the most comprehensive warranties and outstanding service networks in the industry. Thanks for investing in a Haier prod
S H U T T L E OK SCAN TIME.SKIP C C O O N N T T E E N N T T BEFORE OPERATING Warning.................................................................................................................1 Important Safety Instructions..................................................................................2 Buttons and interface location............................................................................. 4 Remote controller.............................................................
Warning WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. *To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any accessory inside the casing. *If necessary, please contact authorized after-sales services. *A lighting flash mark in a triangle: A potentially hazardous situation, which, if not a
Important Safety Instructions The product should be tightly fixed to avoid To avoid fire hazards, do not use this drop damages and even fire. product under direct sunlight or closely to heat sources. Do not locate the product close to water Unplug the power supply and antenna of the product when there is a rainstorm, or oil, which may cause fire hazards. especially Thunderstorm. Do not use damaged or worn electric plugs Do not connect excessive sockets in parallel and keep electric cord
Important Safety Instructions Don't use or store inflammable materials Don't place the product in a humid area to near the product to avoid explosion or fire avoid fire hazards. hazards. Never touch the plug when your hand is wet The antenna of the product should be away as this might cause electric shocks. from electric cable to avoid electric shocks. Always make sure that the televisionis well When antenna is used, measures should be plugged as poor electric taken to prevent water con
Buttons and interface location - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV. Front panel Control Side AV TV/AV 1 MENU 2 VIDEO input VOL+ 3 Side VOL- L-AUDIO-R 4 left and right CH+ audio input. 5 CH- 6 POWER 7 Remote Sensor Indicator Buttons and functions 1. TV/AV button 2. Menu button 3. Volume increase for enhancing the volume or adjusting MENU. 4. Volume decrease for lowering the volume or adjusting MENU 5. Channel number increase 6
Buttons and interface location Rear panel Control 3 7 ANT. COMPONENT IN AUDIO Y Pb/Cb Pr/Cr L R HDMI 1 L R VEDIO PC IN AV OUT S-VEDIO PC 2 AUDIO IN AV IN 8 4 5 6 1 HDMI Input Connnect a signal to HDMI/DVI 2 PC Input Connect the monitor output connector from a PC to the jack 3 COMPONENT Input Connect a component video/audiodevice to these jacks. 4 AV Input Connect audio/video out from an audio/video device to these jacks. 5 S-Video Input Connect S-Video out from a S-Video device to these j
Remote controller Battery loading 1.Slide open the cover of the battery compartment on the back of the remote controller. 2.Load two 7# (AAA)alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. 2 1 3 Precautions As strong light may interfere the Make sure that two AAA alkaline batteries signals, change your position to are loaded. The batteries must be of the operate the remote controller if same type. The ba
H T S U T L E OK SCAN TIME.SKIP Remote controller key function - The remote controller cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction TV DVD SETBOX Press the SELECT button repeatedly to Power Off/Standby select one of the system modes in which any other programmed the remote control can be used. equipment off. DVD USB system buttons SELECT TV/AV Input source display RETURN US
External Equipment Connections - Antenna or Cable Service without a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. outdoor antenna (not supply) Antenna input 75 standard coaxial type ANT IN 75 coaxial cable 300 twin-lead cable Plug Antenna adapter (additional purchase) (not supply) Note * It is recommended that you'd better use 75 coaxial cable to remove the disturbance caused by airwave. * Don't bind antenna cable and electric wire together. T
External Equipment Connections NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some ways to connect your TV. Choose the connection which is best for you. VCR Connection - To avoid picture noise (interference), leave an adequate distance between the VCR and TV. Connection Option 1 Set VCR
External Equipment Connections DVD Setup How to connect 1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr) ANT. input jacks on the TV and connect the DVD audio outputs to the AUDIO jacks on the TV, as shown in the figure. COMPONENT IN 2. If your DVD only has an S-Video output jack, AUDIO Y Pb/Cb Pr/Cr connect this to the S-VIDEO input on the TV L R and Connect the DVD audio outputs to the AV IN jacks on the TV, as shown in the figure. VEDIO L R AV
External Equipment Connections PC Setup How to connect 1. Use the TV`s VGA IN port for video connections. 2. Then, make the corresponding audio ANT. connection. If using a sound card, adjust the PC sound as required. COMPONENT IN Y Pb/Cb Pr/Cr AUDIO How to use L R HDMI 1. Turn on the PC and the TV. L R VEDIO 2. Turn on the display by pressing the POWER PC IN AV OUT button on the TV's remote control. PC S-VEDIO AUDIO IN AV IN 3. Use TV/AV on the remote control to select VGA source. 4.
External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. ANT IN Note Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system. Power source TO USE AC POWER SOURCE Use the AC po
Switching ON/OFF the TV set In the manual, the OSD (on screen display) may be different from your TV`s because it is just an example to help you with the TV operation. Switching ON/OFF the TV set 1 First, connect power cord correctly and the power indicator will light . 2 Press POWER button on the remote control again. 3 If you want to exchange to standing by status, please press down POWER button on the remote controller. 4 Disconnect the power supply or unplug the television if it is in
Searching Channel This TV set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. menu Automatic search OK OK OK OK 1 Press MENU button and then use VOL+/- button to select the Tuning menu. Note : 1.The Tuning menu will be only operated in normal TV mode; 2. When the Tuning Lo
Searching Channel Channel Edit 1 Press MENU button and then use VOL+/- button to menu select the Tuning menu. OK OK OK OK 2 Press VOL+/- button to select Channel Edit item. 3 Press VOL+ to enter the submenu. 4 Press CH+/- button to select the item to adjust, and menu press VOL+/- button to adjust the item to select. Channel No. Press VOL+/- button to select the channel number to edit. Channel Name This will adjust the channel name. Press VOL+/- button to move the cursor, and then
Searching Channel Channel Exchange 1 Press MENU button and then use VOL+/- button to menu select the Tuning menu. OK OK OK OK 2 Press CH+/- button to select "Exchange" item. 3 Press VOL+ to enter the submenu. 4 Press CH+/- button to select the To Channel item, menu and use VOL+/- button to set the desired channel number. OK 5 When you are satisfied with your choice, press CH+/- button to select Exchange item, and then press VOL+ button to confirm, at this time, the
|1||Haier 1509-A||Flat Panel Television||224|
|2||Haier 42EP24STV||Flat Panel Television||89|
|3||Haier 20AL25S||Flat Panel Television||27|
|4||Haier 42HP25SAT||Flat Panel Television||41|
|5||Haier 42EP25BAT||Flat Panel Television||16|