Our goal is to provide you with a quick access to the content of the user manual for LG Electronics 23LX2R. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with LG Electronics 23LX2R.
If looking through the LG Electronics 23LX2R user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual LG Electronics 23LX2R but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to LG Electronics 23LX2R. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Internet Home Page : http://us.lge.com
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer
when you require service.
P/NO : 3828TUL321C (0505-REV00)
Printed in Korea
Warning Warning Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi- cient magnitude to constitute a risk of electric shock to persons.
Safety Instructions Safety Instructions Safety Instructions WARNING : To reduce the risk of fire or electric shock, DO NOT expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION : These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the ope
Safety Instructions Safety Instructions continued Safety Instructions continued 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has b
Contents Contents Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Sound Menu Options Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4 EZ Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Equalizer Adjustments . . . . . . . . . . . . . . . . . . .18 Introduction AVL (Auto Volume Leveler) . . . . . . . . . . . . . . . .18 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Sound Balance
Introduction Introduction Introduction Controls Controls CHANNEL CH Buttons VOLUME VOL Buttons ENTER ENTER Button MENU Button MENU TV TV·VIDEO VIDEO Button ON/OFF Button Remote Control Sensor Power/Standby Indicator Glows red in Standby mode, Glows green when the TV is turned on. 6
Introduction Connection Options Connection Options S-VIDEO INPUT COMPONENT2 IN (480i) AUDIO INPUT 1 PC SOUND INPUT DVI INPUT ANTENNA AUDIO/VIDEO (RGB INPUT) INPUT INPUT UPGRADE PORT JACK COMPONENT1 (DVD/DTV IN) REMOTE CONTROL ((480i/480p/720p/1080i), Audio) JACK AC INPUT 7
Introduction Remote Control Key Functions Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the TV. MUTE MULTIMEDIA Switches the sound on or off. Selects: TV, Component 1, Component 2 or PC mode. TV/VIDEO Selects: TV, Video, S-Video, Component 1, Component 2 POWER or PC mode. FCR MTS (Refer to p.16) (Refer to p.19) MENU EXIT ENTER CH D D / E E (Channel button) VOL F F / G G (Volume button) NUMBER buttons AUDIO VIDEO (Refer to p.18) (Refer to
Installation Installation Installation Accessories Accessories 1.5V Owner’s Manual AAA Batteries Remote Control Power Cord Tie Holder Polishing cloth DVI-D cable (PC) DVI to D-Sub cable (PC) Audio cable (PC) - Arrange the wires with the tie Holder. Kensington Security System Kensington Security System - The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. - For the detailed installation and use of the Kens
Installation Installation Instruction Installation Instruction Connection of TV Connection of TV 1 Pull the back cover backside while pushing the two tabs and then lift it up. 2 Connect the antenna cable to the socket marked +75 Ω on the back. For the best reception an outdoor antenna should be used. 3 To connect an additional equipment, see the External Equipment Connections section. 4 Connect the power cord. 5 Close the back cover. 1 2 4 ~ 5 Cable Holders Cable Holders - Thread, then pull the
Installation External Equipment Connections External Equipment Connections Antenna Connection Antenna Connection - For optimum picture quality, adjust antenna direction. Connecting to an Inside Antenna Setup - Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below. (Use the correct type of antenna cable for the type of wall antenna jack.) Turn clockwise to tighten. 75Ω Round Cable Copper Wire 300Ω Flat Wire Antenna Converter Antenna Jack Wall Connection J
Installation External Equipment Connections Continued External Equipment Connections Continued VCR Setup VCR Setup - In Video mode, TV automatically reverts to TV mode if the FCR button or FLASHBK buttons are pressed. Connection 1 1 Set VCR switch to 3 or 4 and then tune TV to the same channel number. 2 Connection 2 Typical 1. Connect the audio/video output jacks on VCR to the corre- Antennas sponding input jacks on the TV. When connecting the TV 1 ANT IN to a VCR, match the jack colors (Video =
Installation External A/V Source Setup External A/V Source Setup Connections Connect the audio/video output jacks on the external A/V equipment to the corresponding input jacks on the TV. When connecting the TV to external A/V equipment, 1 match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). Camcorder Viewing Setup 1. Turn on the external A/V equipment. 2. Use the TV/VIDEO button on the remote control to select Video. Video Game set 3. Operate the corresponding exte
Installation DTV Setup DTV Setup - To watch digitally broadcast programs, purchase and connect a digital set-top box. 1 Connections Connect the digital set-top box video outputs to the COMPONENT (Y, PB, PR) jacks and connect the digital set-top box audio outputs to the AUDIO jacks. Viewing Setup 1. Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) YPB PR (R) AUDIO (L) 2. Use the TV/VIDEO or MULTIMEDIA button on the remote control to select Component 1.
Operation Operation Operation TV Operation Overview TV Operation Overview 1. First, make all equipment connections. Plug the AC Adapter into the TV, then plug the AC Adapter into a power outlet. At this time, the TV is switched to standby mode. • In standby mode, press the POWER, CH ( ), TV/VIDEO, MULTIMEDIA or number button on the remote D,E control or ON/OFF, CH (D,E), TV/VIDEO located on the TV to turn the TV on. 2. Select the viewing source by pressing TV/VIDEO or MULTIMEDIA repeatedly. • No
Operation Channel Menu Options Channel Menu Options Memorizing the Channels with EZ scan Memorizing the Channels with EZ scan - For Auto program to work, the programming source must be connected to the TV and the TV must be receiving programming sig- nals either over-the-air or from a cable-type service provider. Channel 1. Press the MENU button and then use D D E E button to select the Channel menu. / EZ Scan To start Manual prog. 2. Press the G G button and then use D D / E E button to sele
Operation Picture Menu Options Picture Menu Options EZ Video EZ Video - This function adjusts the TV for the best picture appearance. 1. Press the VIDEO button repeatedly to select the picture appearance setup option as shown below. Clear Optimum Soft User • You can also adjust EZ Video in the Picture menu. • Clear, Optimum and Soft are preset for good picture quality at the factory and cannot be changed. Manual Picture Control ( Manual Picture Control (User option) option) - You can adjust pic
Operation Sound Menu Options Sound Menu Options EZ Audio EZ Audio - This function lets you enjoy the best sound without any special adjustment because the TV selects the appropriate sound option based on the program content. 1. Use the AUDIO button to select the appropriate sound setup as shown below. Flat Music Movie Sports User • You can also adjust EZ Audio in the Sound menu. Equalizer Equalizer Adjustments Adjustments Sound EZ Audio Flat AVL Music Balance Movie Sports User G 0.1 0.5 1 5 10 K
Operation Sound Menu Options continued Sound Menu Options continued Sound Balance Sound Balance Sound 1. Press the MENU button and then use button to select the Sound menu. D D / E E EZ Audio 2. Press the G G button and then use button to select Balance. AVL D D / E E Balance 0 3. Press the G G button and then use F F / G G button to adjust the sound balance. • Balance is adjustable from Left 50 to Right 50. 4. Press the ENTER button to save. D FG OK MENU E Stereo/SAP Broadcasts Setup Stere
Operation Timer Menu Options Timer Menu Options Auto Clock Setup Auto Clock Setup - The time is set automatically through from a PBS broadcast signal. - The PBS channel signal includes information for the correct time and daylight saving time. Timer Auto Clock Clock Auto G Time zone Auto Off timer Manual PBS Ch. TV 1 On timer D.S.T. Auto Auto off D FG Move Adjust Â Exit D E FG OK MENU E 1. Press the MENU button and then use button to sel
|1||LG Electronics 1199LLUU5500||Flat Panel Television||19|
|2||LG Electronics 141K TX)||Flat Panel Television||14|
|3||LG Electronics 15LC1R||Flat Panel Television||13|
|4||LG Electronics 15LA6R||Flat Panel Television||37|
|5||LG Electronics 1199LLUU4400||Flat Panel Television||32|