Summary of the content on the page No. 1
PLASMA TV
LCD TV
OWNER’S MANUAL
LCD TV MODELS PLASMA TV MODEL
32LC50C
32LC5DC 42PX8DC
32LC50CS
32LC5DCS 42PG65C
32LC50CB
32LC5DCB 42PG60C
32LX50C
37LC5DC
32LX50CS
37LC5DCB
37LC50C
37LC5DC1
37LC50CB
42LC5DC
42LB50C
32LX5DC
42LC50C
32LX5DCS
42LB5DC
Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer when you require
servic
Summary of the content on the page No. 2
LG's own special digital image generator, consisting Manufactured under license from Dolby Laboratories. of a full digital image processor, six different main “Dolby “and the double-D symbol are trademarks of picture quality factors. Dolby Laboratories. High-definition television. High-resolution digital It has 2 HDMI ports that connect audio and video television broadcast and playback system composed devices with one cable and produces the highest of roughly a million or more pixels, 16:9 asp
Summary of the content on the page No. 3
WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO Class B digital device USER SERVICEABLE PARTS INSIDE. REFER TO This equipment has been tested and found to com- QUALIFIED SERVICE PERSONNEL. ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
Summary of the content on the page No. 4
SAFETY INSTRUCTION IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on Read these instructions. 6 or pinched particularly at plugs, convenience Keep these instructions. receptacles, and the point where they exit from Heed all warnings. the apparatus. Follow all instructions. Do not use this apparatus near water. 1 Only use attachments/accessories specified by 7 the manufacturer. Clean only with dry cloth. 2 Use only with the cart, stand, tripod, bracket, 8 or table specifie
Summary of the content on the page No. 5
Never touch this apparatus or antenna during a WARNING - To reduce the risk of fire or electrical 11 15 thunder or lighting storm. shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable When mounting a TV on the wall, make sure not to 12 objects such as gasoline or candles or expose the install the TV by the hanging power and signal TV to direct air conditioning. cables on the back of the TV. Do not al
Summary of the content on the page No. 6
A AN NT TE EN NN NA AS S Cleaning 21 20 When cleaning, unplug the power cord and scrub O Ou ut td do oo or r a an nt te en nn na a g gr ro ou un nd diin ng g gently with a soft cloth to prevent scratching. Do not If an outdoor antenna is installed, follow the precau- spray water or other liquids directly on the TV as tions below. An outdoor antenna system should not electric shock may occur. Do not clean with chemi- be located in the vicinity of overhead power lines or cals such as alcohol, th
Summary of the content on the page No. 7
CONTENTS Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Low-Power Picture Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 SAFETY INSTRUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Image Sticking Minimization( ISM) Method . . . . . . . . . . . . . 53 FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 8
UT MODE INPUT MODE TV POWER TV TV POWER TV INPUT DVD INPUT DVD MULTI VCR MULTI VCR PIP TV PIP CH -PO PIPW CHE +R PIP INPU D TVD PIP PIP CH - PIP CH + PIP INPUT EZ PIC EZ SOUND SWAP INFO EZ PIC EZ SOUND SWAP INFO STB VCR RATIO CC INPUT CC MENU RATIO CC MENU RATIO XIT ENTER SAP EXIT SAP ENTER ENTER RETURN MENU INFO i TIMER TIMER CH PAGE P VOL CH PAGE VOL CH A G E MUTE MUTE 12 3 12 3 45 6 45 6 78 9 78 9 FLASH 0 BACK 0 FLASHBK PIP SAP PIP CH- PIP CH+ PIP SWAP PIP INPUT FEATURES OF THIS TV O On n
Summary of the content on the page No. 9
PREPARATION L LC CD D T TV V m mo od de ell o on nlly y O Op pt tiio on n E Ex xt tr ra as s Protective Bracket and Bolt for Power Cord D-sub 15 pin Cable (This feature is not available for all models.) (Refer to P.13) Only 32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C models x 2 4-Bolts for stand M4xL22 Cable Management Cable Holder 1-Bolt for fixing the assembly Torx plus (Refer to p.13) (Refer to p.13) Cable Holder (Refer to p.18) Star head screw (Refer to p.13) Only 32/37LC5DC*, (
Summary of the content on the page No. 10
PREPARATION PREPARATION FRONT PANEL CONTROLS ■ Here shown may be somewhat different from your TV. ■ If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it). 32/37/42LC5DC*,32/37/42LC50C*, 42LB5DC, 42LB50C CH CHANNEL Buttons VOL VOLUME Buttons ENTER Button ENTER MENU MENU Button INPUT INPUT Button POWER Button Remote Control Sensor Power/Standby Indicator Illuminates red when the TV is in
Summary of the content on the page No. 11
PREPARATION 32LX5DC*, 32LX50C* Remote Control Sensor Power/Standby Indicator Illuminates red when the TV is in standby mode. C CH H VOL VOL MENU MENU IINPUT NPUT E ENTER NTER O ON/OFF N/OFF Illuminates green when the TV is switched on. ON/OFF Button INPUT Button MENU Button ENTER Button VOLUME Buttons CHANNEL Buttons 9
Summary of the content on the page No. 12
PREPARATION PREPARATION 42PX8DC INPUT INPUT E ENTER NTER This TV’s stand is sold, separately. VOL INPUT MENU ENTER CH Remote Control Sensor POWER Button Power/Standby INPUT Button Indicator MENU Button Illuminates red when the ENTER Button TV is in standby mode. VOLUME Buttons Illuminates green when CHANNEL Buttons the TV is switched on. 42PG60C, 42PG65C Remote Control Sensor POWER Button Power/Standby Indicator Illuminates red in standby mode. INPUT ENTER Illuminates blue when the set is switch
Summary of the content on the page No. 13
PREPARATION BACK PANEL INFORMATION ■ Here shown may be somewhat different from your TV. 32/37/42LC5DC*,32/37/42LC50C*, 42LB5DC, 42LB50C 32LX5DC*, 32LX50C* S-VIDEO 8 8 AV IN 2 11 AV IN 2 11 42PX8DC ANTENNA IN M.P.I. AV IN 2 S-VIDEO ( ) 8 11 42PG60C, 42PG65C S-VIDEO 8 11 AV IN 2 11 ( ) ( ) VIDEO L/MONO AUDIO R VIDEO L/MONO A AUDIO O R VIDEO L/MONO AUDIO R R R AUDIO L/MONO VIDEO S-VIDEO R
Summary of the content on the page No. 14
PREPARATION PREPARATION ■ Here shown may be somewhat different from your TV. This part mainly use picture for the LCD TV models. ANTENNA ANTENNA IN IN M M.P .P..I. I. 12 13 2 4 DIGITAL 1 AUDIO 3 RESET 5 OUT SERVICE ONLY (OPTICAL) HDMI/DVI IN REMOTE M.P.I. CONTROL 1(DVI) 2 UPDATE OUT RGB IN 6 (MONO ) VIDEO S-VIDEO SPEAKER AUDIO VIDEO AUDIO AUDIO RJP OUT IN COMPONENT IN AV IN 1 INTERFACE 8 (RGB, DVI) 4 8 9 10 7 6 (Only 42PG60C, 42PG65C Models) 2 10 7 DIGITAL RGB IN RJP AU
Summary of the content on the page No. 15
PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Here shown may be somewhat different from your TV. (This feature is not available for all models.) Connect the cables as necessary. 1 To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the PROTECTIVE BRACKET and the screw as shown. It will help prevent the power cable from being removed by accident. PROTECTIVE BRACKET Install the CABLE HOLDER as shown. 2 BOLT CABLE HOLDER Install the CABLE MANAG
Summary of the content on the page No. 16
PREPARATION PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Here shown may be somewhat different from your TV. (This feature is not available for all models.) To separate the CABLE HOLDER, loosen the bolt 1 installed the set. Connect the cables as necessary. 2 To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the PROTECTIVE BRACKET and the screw as shown. It will help prevent the power cable from being removed by accident. PROTECTIVE BRACKET
Summary of the content on the page No. 17
PREPARATION 42PX8DC 42PG60C, 42PG65C Connect the cables as necessary. Hold the CABLE MANAGEMENT with both 1 1 To connect additional equipment, see the hands and pull it as shown. EXTERNAL EQUIPMENT SETUP section. 45° Install the CABLE MANAGEMENT CLIP as 2 shown. (Except 42PG60C model) Connect the cables as necessary. 2 If your TV has CABLE HOLDER, fix it as shown To connect an additional equipment, see the and bundle the cables. EXTERNAL EQUIPMENT SETUP section. CABLE HOLDER CABLE MANAGEMENT C
Summary of the content on the page No. 18
PREPARATION PREPARATION ATTACHING THE TV TO A WALL ■ This feature is not available for all models. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV. ■ Insert the TV brackets (or eye-bolts) and bolts to tighten the p
Summary of the content on the page No. 19
PREPARATION ATTACHING THE TV TO A DESK ■ Here shown may be somewhat different from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. * S Sc cr re ew ws s - - M M5 5 x x L L ( (t ta ab blle e d de ep pt th h + + 8 8~1 10 0 m mm m) ) ex) table depth-15mm: Bolts - M5 x 25 32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C Stand 4-Screws Desk 32LX5DC*, 32LX50C* Stand 4-Screws Desk 42PX8DC Stand
Summary of the content on the page No. 20
PREPARATION PREPARATION STAND INSTALLATION ( 32/37LC5DC*, 32/37LC50C* ) ( 42PG65C ) Carefully place the TV screen side down on a Carefully place the product screen side down 1 1 cushioned surface to protect the screen from on a cushioned surface that will protect prod- damage. uct and screen from damage. Assemble the product stand with the product as 2 Assemble the product stand with the product 2 shown. as shown. Securely install the 4 bolts provided as shown 3 below. Tighten the 4 bolts secu
