Our goal is to provide you with a quick access to the content of the user manual for LG Electronics 42PX7DC. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with LG Electronics 42PX7DC.
If looking through the LG Electronics 42PX7DC user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual LG Electronics 42PX7DC but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to LG Electronics 42PX7DC. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Please read this manual carefully and completely before
operating your TV.
Retain this manual for future reference.
Record model number and serial number of the TV in the
spaces provided below.
See the label attached on the back cover and relate this
information to your dealer if you require service.
Model Number :
Serial Number :
LG Electronics U.S.A., Inc.
Warning/Caution Warning/Caution WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING/CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi- cient magnitude to constitute a risk of ele
Safety Instructions Safety Instructions IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appara- tus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “I
Safety Instructions Safety Instructions 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped. 15. CAUTION concerning the Power C
Contents Contents Warning/Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Audio Language . . . . . . . . . . . . . . . . . . . . . . . .26 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4 EZ SoundRite / EZ Sound . . . . . . . . . . . . . . . . .26 Manual Sound Control (Custom Option) . . . . . .26 Introduction Front Surround . . . . . . . . . . . . . . . . . . . . . . . . .27 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction Introduction What is a Plasma Display Panel (PDP)? A plasma display panel is the latest display technology and the best way to achieve flat panel displays with excellent image quality and large screen sizes that are easily viewable. The PDP can be thought of as a descendant of the neon lamp and it can be also be viewed as a series of fluorescent lamps. How does it work? PDP is an array of cells, known as pixels, which are comprised of 3 sub pixels, corresponding to the colors red,
Controls Controls - This is a simplified representation of front panel. Here shown may be somewhat different from your TV. Front Panel Controls Front Panel Controls INPUT INPUT ENTER ENTER VOL INPUT MENU ENTER CH CHANNEL (E E, D D) Buttons ENTER Button POWER Button INPUT Button Remote Control Sensor VOLUME (F F,G G) Buttons MENU Button Operating Guide 7 INPUT ENTER
Connection Options Connection Options Back Connection Panel Back Connection Panel HDMI IN 2 M.P.I S-VIDEO IN 2 ANTENNA ANTENNA ANTE NNA IN IN M.P M.P..I I AUDIO IN VIDEO IN ANTENNA IN AV IN 1 DIGITAL AUDIO OUT COMPONENT IN OPTICAL HDMI1/DVI IN SERVICE ONLY RJP INTERFACE INTERF INTERFACE ACE 1 1 S SER ERV VICE ONL ICE ONLY Y O OPTICAL PTICAL A AU UDIO IN(RGB/DVI) DIO IN(RGB/DVI) S SPEAKER OUT(8 ) PEAKER OUT(8 ) AC IN R RESET RESET RE ES SE ET T U U UPDA UPDA P PD DA AT T T TE E E E UPDAT
Remote Control Key Functions Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the TV. MODE INDICATOR LIGHTS Select the remote oper ting mode: TV, Show active remote mode every time VCR CABLE DVD TV HDSTB VCR, Cable, DVD and Satellite. any button is pressed. MODE INFO POWER INPUT External input modes rotate in regular INFO sequence: Tuner, AV1, AV2, Component, INPUT MULTIMEDIA EZ PIC Display information t the top of the screen. RGB1, RGB2, H
Remote Control Key Functions Remote Control Key Functions MULTIMEDIA Selects: RGB1-2,HDMI1/DVI, HDMI2 and POWER Component input sources. TV VCR CABLE DVD HDSTB Turns your TV or any other programmed equipment on or off, depending on mode. MODE INFO POWER MULTIMEDIA INPUT EZ PIC EZ SOUND ADJUST Selects the sound appropriate for the pro- Adjusts screen position, size, and ADJUST SIGNAL EZ SOUND gram's character. phase in PC mode. 1 2 3 FLASHBK Tunes to the last channel viewed. SIGNAL 4 5 6 Displ
Installation Installation Accessories Accessories Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. 1.5V Owner’s Manual 75Ω Round Cable Batteries Power Cord TV VCR CABLE DVD HDSTB MODE INFO POWER INPUT MULTIMEDIA EZ PIC ADJUST SIGNAL EZ SOUND 1 2 3 4 5 6 7 8 9 FLASHBK 0 MUTE FAV + SAP TIMER VOL CH PIP PIPCH- PIPCH+ SWAP RATIO CC FREEZE PIP INPUT MENU EXIT PLAY STOP RECORD PAUSE RE
Installation Instructions Installation Instructions • The TV can be installed in various ways such as on a wall, or on a desktop etc. • The TV is designed to be mounted horizontally. GROUNDING Power Supply Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the Short-circuit unit by connecting it to telephone wires, lightening rods, or gas pip
External Equipment Connections External Equipment Connections Antenna Connection Antenna Connection Analog and Digital TV signals provided on one antenna - Antenna or Cable Service without a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments 2 ANTENNA ANTENNA IN IN (Connect to wall antenna socket) ANTENNA M.P.I Wall Antenna Socket Copper Wire RF Coaxial Wire (75 ohm) VHF Antenna Turn clockwise to tighten. UHF Antenna Copper
VCR Setup VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV - Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. Connection Option 1 Set VCR output switch to channel 3 or 4 and then tune the TV to the same channel number. Connection Option 2 1. Connect the audi
DVD Setup DVD Setup How to connect 1. Connect the DVD video outputs (Y, PB, PR) to the COMPO- NENT (Y, PB, PR) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as INTERFACE 1 SERVICE ONLY OPTICAL shown in the figure. 2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and connect the DVD audio out- puts to the AUDIO INPUT jacks on the TV, as shown in the figure. Note: If your DVD player does not have component AV
HDSTB Setup HDSTB Setup - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. - This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i). How to connect Use the TV’s COMPONENT (Y, PB, PR) INPUT, RGB or HDMI1/DVI jack for video connections, depending on your
PC Setup PC Setup - This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. - The TV perceives 640x480, 60Hz as DTV 480p based on the PC graphic card, change the screen scanning rate for the graphic card accordingly. How to connect 1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60Hz. 2. Use the TV’s RGB INPUT or DVI (Digital Visual Interface) INPUT port for video connections, depending on your PC connector. • If t
1. Depending on the graphics card, DOS mode may vice center. not work if a HDMI to DVI Cable is in use. 5. Check the image on your TV. There may be noise 2. When Source Devices connected with HDMI1/DVI associated with the resolution, vertical pattern, Input, output PC Resolution (VGA, SVGA, XGA), contrast or brightness in PC, HDMI1/DVI mode. If Position and Size may not fit to Screen.Press the noise is present, change the PC or HDMI1/DVI ADJUST button to adjust the screen Position of TV mode to
Digital Digital Audio Output Setup Audio Output Setup Send the TV’s audio to external audio equipment (stereo system) via the Digital Audio Out(Optical) port. IINTERF NTERFA ACE CE How to connect 1 1 SER SERV VICE ONL ICE ONLY Y OPTICAL OPTICAL 1. Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. 2. Connect the other end of the optical cable to the digital audio (opti- cal) input on the audio equipment. See the external audio equipment instruction manual for ope
Operation Operation Turning the TV On Turning the TV On * In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an example to help you with the TV operation. 1. First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the button on the TV or press the POWER button on the remote control. 2. Select the viewing source by using INPUT button on the remote control. 3. When finished using the TV,
|1||LG Electronics 1199LLUU5500||Flat Panel Television||19|
|2||LG Electronics 141K TX)||Flat Panel Television||10|
|3||LG Electronics 15LC1R||Flat Panel Television||13|
|4||LG Electronics 15LA6R||Flat Panel Television||20|
|5||LG Electronics 1199LLUU4400||Flat Panel Television||19|