Marshall electronic V-R171P-HDAV-R171P-HDA user manual

Summary of the content on the page No. 1

Marshall Electronics
8
Standard Accessories
1910 East Maple Ave.
• Users manual
Accessories Supplied with the V-R171P-HDA:
El Segundo, CA 90245
• “Brick” type 12VDC power supply with 4 Pin Female XLR connector
Tel.: 800-800-6608 • 310-333-0606
• “V” Mount battery adapter
Fax: 310-333-0688
• VESA 75 Mount
www.LCDRacks.com
9
Optional Accessories
Email: sales@lcdracks.com
Desk Stand Use for Desk Top
Wall Mount V-LCD17-TV-WM Attaches monitor to Wall
Ceiling Mount V-LCD17-TV-CM Attaches m

Summary of the content on the page No. 2

TV SETUP 1 Product Overview Use UP/DOWN/LEFT/RIGHT buttons to select function. The V-R171P-HDA is a rack-mounted monitor with a 17”, 5 : 4 aspect ratio active matrix LCD/TFT module. Mount- SEARCH AND TUNE FUNCTIONS ARE NOT USED ON ing can also be achieved via a VESA 75 reinforced mount point on the rear of the unit. The display will produce a THE V-R171P-HDA high-resolution 1280H x 1024W SXGA image from a computer or display scaled video images. Component video, Use CCD functions for VIT clos

Summary of the content on the page No. 3

4 Operational Setup 1. Unpack the V-R171P-HDA and accompanying power supply. Physically inspect for any damage that may have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If you are not located within the continental united states call +1 310-333-0606. 2. Install in your desired location. 3. Connect required cables for signal input and output. 4. Attach battery (Optional) or power connection from power supply to the back

Summary of the content on the page No. 4

6 Front Panel Indicators and Controls Tally Indicators Dual Function EXIT button 1- Cycles Input selection (Selection Displayed lower right of screen) 2- Exits OSD Menu Mode Power On/Off selec- On Screen Display UP / DOWN / LEFT / RIGHT tion button (OSD) menu selections for OSD functions Illuminates dim MENU Activation red when power is Button applied. Turns bright red when monitor is switched on 7 Menu Functions Note: MENU select will toggle through 5 menus, FUNCTION, PICTURE, AUDIO

Summary of the content on the page No. 5

TV SETUP 1 Product Overview Use UP/DOWN/LEFT/RIGHT buttons to select function. The V-R171P-HDA is a rack-mounted monitor with a 17”, 5 : 4 aspect ratio active matrix LCD/TFT module. Mount- SEARCH AND TUNE FUNCTIONS ARE NOT USED ON ing can also be achieved via a VESA 75 reinforced mount point on the rear of the unit. The display will produce a THE V-R171P-HDA high-resolution 1280H x 1024W SXGA image from a computer or display scaled video images. Component video, Use CCD functions for VIT clos

Summary of the content on the page No. 6

Marshall Electronics 8 Standard Accessories 1910 East Maple Ave. • Users manual Accessories Supplied with the V-R171P-HDA: El Segundo, CA 90245 • “Brick” type 12VDC power supply with 4 Pin Female XLR connector Tel.: 800-800-6608 • 310-333-0606 • “V” Mount battery adapter Fax: 310-333-0688 • VESA 75 Mount www.LCDRacks.com 9 Optional Accessories Email: sales@lcdracks.com Desk Stand Use for Desk Top Wall Mount V-LCD17-TV-WM Attaches monitor to Wall Ceiling Mount V-LCD17-TV-CM Attaches m