Our goal is to provide you with a quick access to the content of the user manual for Panasonic TH-65PF10WK. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Panasonic TH-65PF10WK.
If looking through the Panasonic TH-65PF10WK user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Panasonic TH-65PF10WK but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Panasonic TH-65PF10WK. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
High Deﬁ nition Plasma Display
The illustration shown is an image.
Please read these instructions before operating your set and retain them for future reference.
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions. Visit our Panasonic Web Site http://p
Important Safety Notice WARNING 1) To prevent damage which may result in ﬁ re or shock hazard, do not expose this appliance to dripping or splashing. Do not place containers with water (ﬂ ower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.) No naked ﬂ ame sources, such as lighted candles, should be placed on / above the set. 2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualiﬁ ed service personnel. 3)
Safety Precautions WARNING Setup This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) • Speakers .....................................................TY-SP50P8W-K (TH-50PF10WK), TY-SP65P10WK (TH-65PF10WK) • Pedestal ..........................................
Safety Precautions When using the Plasma Display The Plasma Display is designed to operate on 220 - 240 V AC, 50/60 Hz. Do not cover the ventilation holes. • Doing so may cause the Plasma Display to overheat, which can cause ﬁ re or damage to the Plasma Display. Do not stick any foreign objects into the Plasma Display. • Do not insert any metal or ﬂ ammable objects into the ventilations holes or drop them onto the Plasma Display, as doing so can cause ﬁ re or electric shock. Do not remove the
Safety Precautions CAUTION When using the Plasma Display Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display. • Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result. Be sure to disconnect all cables before moving the Plasma Display. • If the Plasma Display is moved while some
Accessories Accessories Supply Check that you have the accessories and items shown Operating Instruction book Remote Control Batteries for the Remote Transmitter Control Transmitter EUR7636070R (2 × R6 (UM3) Size) Power supply cord Fixing bands × 2 Remote Control Batteries Requires two R6 batteries. 2. Insert batteries - note correct 3. Replace the cover. 1. Pull and hold the hook, then open polarity ( + and -). the battery cover. + - + - “R6 (UM3)” size Helpful Hint: For frequent remote contr
Connections TH-50PF10WK When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker’s Installation Manual for details on speaker installation. Speakers (Optional accessories) 1 2 1 Speaker terminal (L) Speaker 2 AC cord connection (see page 13) terminal (R) – AC cord ﬁ xing Unplug the AC cord Unplug the AC cord pressing the two Plug the AC cord into the knobs. display unit. Note: Plug the AC cord until it clicks. When disconnecting the AC cor
Connections TH-65PF10WK When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker’s Installation Manual for details on speaker installation. Speakers (Optional accessories) 1 2 1 Speaker terminal (L) 2 Speaker terminal (R) AC cord connection (see page 13) – AC cord ﬁ xing Close Unplug the AC cord Push until the hook clicks. Plug the AC cord 1 into the display unit. Plug the AC cord Open Unplug the AC cord pressing the until it clicks. 2. Pull
Connections PC Input Terminals connection COMPUTER AUDIO PC IN TH-42PS9 Conversion adapter (if necessary) Mini D-sub 15p RGB PC cable Audio Stereo plug Connect a cable which matches the audio output terminal on the computer. Notes: • Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input Terminal. • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequen
Connections SERIAL Terminals connection The SERIAL terminal is used when the Plasma Display is controlled by a computer. COMPUTER 13 2 45 67 8 9 SERIAL RS-232C Straight cable Pin layout for SERIAL Terminal D-sub 9p Notes: • Use the RS-232C cable to connect the computer to the Plasma Display. • The computer shown is for example purposes only. • Additional equipment and cables shown are not supplied with this set. The SERIAL terminal conforms to the RS-232C interface speciﬁ cation, so that the Pla
Connections HDMI connection This unit has terminal boards equivalent to Dual HDMI Terminal Board (TY-FB10HMD) and BNC Component Video Terminal Board (TY-42TM6A) as standard equipment. [Pin assignments and signal names] Pin No. Signal Pin No. Signal T.M.D.S Clock 1 11 T.M.D.S Data2+ Shield T.M.D.S Data2 2 12 T.M.D.S Clock- Shield RL AUDIO PR/CR/R PB/CB/B Y/G 3 13 T.M.D.S Data2- CEC COMPONENT/RGB IN 4 T.M.D.S Data1+ Reserved SLOT1 SLOT2 SLOT3 PC 14 T.M.D.S Data1 5 (N.C. on device) Shield
Power On / Off Connecting the AC cord plug to the Plasma Display. Fix the AC cord plug securely to the Plasma Display with the clamper. (see page 8, 9) TH-50PF10WK TH-65PF10WK Connecting the plug to the Wall Outlet Notes: • Main plug types vary between countries. The power plug shown at right may, therefore, not be the type ﬁ tted to your set. • When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet ﬁ rst. INPUT MENU -/ VOL +/ ENTER/ Press the
Power On / Off Press the button on the remote control to turn the Plasma Display off. Power Indicator: Red (standby) Press the button on the remote control to turn the Plasma Display on. Power Indicator: Green Turn the power to the Plasma Display off by pressing the switch on the unit, when the Plasma Display is on or in standby mode. Note: During operation of the power management function, the power indicator turns orange in the power off state. 14
Initial selections Selecting the input signal Select the input signals to be connected by installing the optional Terminal Boards. Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follows: INPUT1 INPUT2 INPUT3 PC Press the INPUT “1”, “2”, “3” or “PC” input mode selection button to select the input mode. This button is used to switch directly to INPUT mode. These buttons can only display the slot
Basic Controls Main Unit Remote control sensor Volume Adjustment Volume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up “–” : press to move the cursor down (see page 18) Enter / Aspect button (see page 18, 20) INPUT MENU -/ VOL +/ ENTER/ MENU Screen ON / OFF Main Power On / Off Switch Each time the MENU button is pressed, the menu screen will switch. (see page 18) Power Indicator The Power Indicator will light. Normal Viewing PICTURE SET UP • Power-OFF
Basic Controls Remote Control Transmitter Status button R button (see page 19) Press the “Status” button to display Press the R button to return to previous menu screen. the current system status. 1 Input label Standby (ON / OFF) button 2 Aspect mode (see page 20) The Plasma Display must ﬁ rst be plugged into Off timer 3 the wall outlet and turned on at the power switch The off timer indicator is displayed only (see page 13, 14). when the off timer has been set. Press ON to turn the Plasm
On-Screen Menu Displays To Picture adjust menu The MENU button on the unit can also (see page 25) 1 Press to select. be pressed. Picture 1/2 Normalise Normal Picture Mode Normal INPUT MENU -/ VOL +/ ENTER/ Contrast 25 Brightness 0 Colour 0 [ from the unit ] Hue 0 Each time the MENU button is pressed, Sharpness 5 the menu screen will switch. Normal Viewing Picture Setup Picture 2/2 INPUT MENU -/ VOL +/ ENTER/ Sound Pos. /Size White balance Normal Off 1 2 Colour Management Advanced set
On-Screen Menu Displays Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting. [ from the unit ] 2 Press to access each adjust screen. INPUT MENU -/ VOL +/ ENTER/ Press the R button to return to previous menu screen. Press to return to next menu screen. To Signal screen for AV To Signal screen for To Signal screen for RGB To Signal screen for Digital (S Video) (see page 41-43) Component (see page 42, 43) (see page 42-44) (see pa
ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options: 4 : 3 Zoom 16 : 9 Panasonic Auto Just Note: [from the unit] When selecting an input slot that attaches BNC Dual Video Terminal Board (TY-FB9BD), Panasonic Auto cannot be selected. The aspect mode changes each time the ENTER button is INPUT MENU -/ VOL +/ ENTER/ pressed. [During MULTI PIP Operation
|1||Panasonic 65HD||Flat Panel Television||90|
|2||Panasonic 2007-2008||Flat Panel Television||105|
|3||Panasonic BT-LH1710E||Flat Panel Television||11|
|4||Panasonic 42HD||Flat Panel Television||196|
|5||Panasonic BT-LH1710MC||Flat Panel Television||31|