Our goal is to provide you with a quick access to the content of the user manual for Panasonic TH-65PF10UK. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Panasonic TH-65PF10UK.
If looking through the Panasonic TH-65PF10UK user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Panasonic TH-65PF10UK but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Panasonic TH-65PF10UK. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Manual de instrucciones
High Deﬁ nition Plasma Display
Pantalla de Plasma de Alta Deﬁ nición
Número de modelo.
The illustration shown is an image.
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
La ilustración mostrada es una imagen.
Antes de conectar, utilizar o ajustar este producto, lea completamente este manual de instrucciones;
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualiﬁ ed service personnel. The lightning flash with The exclamation point within arrow-head within a triangle a triangle is intended to is in tend ed to tell the user tell the user that important that parts inside the product operating and servicing are a risk of electric shock instructions are in the papers to per sons
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁ ers) that produce heat. 9) Do not defeat the safety purpose o
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt as well, and record the model number and serial number of your set in the space provided on the rear cover of these instructions. Table of Contents Important Safety Instruction
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha
Safety Precautions CAUTION This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) • Speakers .......................................................... TY-SP50P8W-K (TH-50PF10UK), TY-SP65P10WK (TH-65PF10UK) • Pedestal ......................................
Safety Precautions / Maintenance WARNING Securely insert the power cord plug as far as it will go. Setup • If the plug is not fully inserted, heat may be generated Do not place the Plasma Display on sloped or unstable which could cause ﬁ re. If the plug is damaged or the surfaces. wall socket plate is loose, they should not be used. • The Plasma Display may fall off or tip over. Do not place any objects on top of the Plasma Do not handle the power cord plug with wet hands. Display. • Doing
Accessories Accessories Supplied Check that you have the Accessories and items shown Operating Remote Control Batteries for the Instruction book Transmitter Remote Control EUR7636070R Transmitter (2 × AA Size) Fixing bands × 2 AC cord Remote Control Batteries Requires two AA batteries. 1. Pull and hold the hook, then 2. Insert batteries - note correct 3. Replace the cover. open the battery cover. polarity ( + and -). + - + - “AA” size Helpful Hint: For frequent remote control users, replace
Connections TH-50PF10UK When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker’s Installation Manual for details on speaker installation. Speakers (Optional accessories) 1 2 1 Speaker terminal (L) Speaker 2 AC cord connection (see page 14) terminal (R) – AC cord ﬁ xing Unplug the AC cord Unplug the AC cord pressing the two knobs. Note: Plug the AC cord into the display unit. When disconnecting the AC cord, be Plug the AC cord until it cl
Connections TH-65PF10UK When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker’s Installation Manual for details on speaker installation. Speakers (Optional accessories) 1 2 1 Speaker terminal (L) 2 Speaker terminal (R) AC cord connection (see page 14) – AC cord ﬁ xing Unplug the AC cord Close Push until the hook 1 Plug the AC cord clicks. into the display unit. Open Plug the AC cord Unplug the AC cord pressing the until it clicks. 2. Pull
Connections PC Input Terminals connection COMPUTER AUDIO PC IN TH-42PS9 Conversion adapter (if necessary) Mini D-sub 15p RGB PC cable Audio Stereo plug Connect a cable which matches the audio output terminal on the computer. Notes: • Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input Terminal. • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequen
Connections SERIAL Terminals connection The SERIAL terminal is used when the Plasma Display is controlled by a computer. COMPUTER 13 2 45 67 8 9 SERIAL RS-232C Straight cable Pin layout for SERIAL Terminal D-sub 9p Notes: • Use the RS-232C cable to connect the computer to the Plasma Display. • The computer shown is for example purposes only. • Additional equipment and cables shown are not supplied with this set. The SERIAL terminal conforms to the RS-232C interface speciﬁ cation, so that the P
Connections HDMI connection This unit has terminal boards equivalent to Dual HDMI Terminal Board (TY-FB10HMD) and BNC Component Video Terminal Board (TY-42TM6A) as standard equipment. [Pin assignments and signal names] Pin No. Signal Pin No. Signal T.M.D.S Clock 1 T.M.D.S Data2+ 11 Shield T.M.D.S Data2 2 12 T.M.D.S Clock- Shield RL AUDIO PR/CR/R PB/CB/B Y/G 3 13 T.M.D.S Data2- CEC COMPONENT/RGB IN 4 T.M.D.S Data1+ Reserved SLOT1 SLOT2 SLOT3 PC 14 T.M.D.S Data1 5 (N.C. on device) Shield
Power ON / OFF Connecting the AC cord plug to the Plasma Display. Fix the AC cord plug securely to the Plasma Display with the clamper. (see page 9) TH-50PF10UK TH-65PF10UK Connecting the plug to the Wall Outlet. Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet ﬁ rst. INPUT MENU -/ VOL +/ ENTER/ Press the Power switch on the Plasma Display to turn the set on: Power Indicator Power-On. Power Indicator: Green Remote Control Exampl
Power ON / OFF Press the button on the remote control to turn the Plasma Display off. Power Indicator: Red (standby) Press the button on the remote control to turn the Plasma Display on. Power Indicator: Green Turn the power to the Plasma Display off by pressing the switch on the unit, when the Plasma Display is on or in standby mode. Note: During operation of the power management function, the power indicator turns orange in the power off state. 15
Basic Controls Main Unit Remote control sensor Volume Adjustment Volume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up “–” : press to move the cursor down (see page 18) Enter / Aspect button (see page 18, 21) INPUT MENU -/ VOL +/ ENTER/ Main Power On / Off Switch MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen Power Indicator will switch. (see page 18) The Power Indicator will light. Normal Viewing PICTURE SET UP • Power-OFF .
Basic Controls Remote Control Transmitter Status button R button (see page 19) Press the “Status” button to display Press the R button to return to previous menu screen. the current system status. 1 Input label Standby (ON / OFF) button 2 Aspect mode (see page 21) The Plasma Display must ﬁ rst be plugged into 3 Off timer the wall outlet and turned on at the power switch The off timer indicator is displayed only (see page 14). when the off timer has been set. Press ON to turn the Plasma Dis
On-Screen Menu Displays The MENU button on the unit can also be To PICTURE adjust menu 1 Press to select. pressed. (see page 26) PICTURE 1/2 INPUT MENU -/ VOL +/ ENTER/ NORMALIZE NORMAL PICTURE MENU STANDARD PICTURE 25 Each time the MENU button is pressed, the [ from the unit ] BRIGHTNESS 0 menu screen will switch. COLOR 0 TINT 0 Normal Viewing PICTURE SETUP SHARPNESS 5 SOUND POS. /SIZE INPUT MENU -/ VOL +/ ENTER/ PICTURE 2/2 1 2 NORMAL COLOR TEMP COLOR MANAGEMENT OFF 1 Press to select. ON AD
On-Screen Menu Displays Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting. [ from the unit ] 2 Press to access each adjust screen. INPUT MENU -/ VOL +/ ENTER/ Press the R button to return to previous menu. Press to return to next menu screen. To SIGNAL screen for VIDEO To SIGNAL screen for To SIGNAL screen for RGB To SIGNAL screen for Digital (S VIDEO) (see page 42-44) COMPONENT (see page 43-45) (see page 43, 44) (see page 43
Initial selections Selecting the input signal Select the input signals to be connected by installing the optional Terminal Boards. Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follows: INPUT1 INPUT2A INPUT2B INPUT3 PC SLOT2 is for dual input so that you can select INPUT2A or INPUT2B for INPUT2. INPUT2A : HDMI signal terminal in SLOT2 INPUT2B : HDMI signal terminal in SLOT2 Press the INPUT “1”,
|1||Panasonic 65HD||Flat Panel Television||140|
|2||Panasonic 2007-2008||Flat Panel Television||158|
|3||Panasonic BT-LH1710E||Flat Panel Television||39|
|4||Panasonic 42HD||Flat Panel Television||241|
|5||Panasonic BT-LH1710MC||Flat Panel Television||10|