Our goal is to provide you with a quick access to the content of the user manual for Philips 1EMN26039A. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Philips 1EMN26039A.
If looking through the Philips 1EMN26039A user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Philips 1EMN26039A but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Philips 1EMN26039A. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Register your product and get support at
EN: For further assistance, call the customer support service in your country.
• To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands, contact Philips
EN User Manual Customer Care Center at 1-866-309-0841
• To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 504 62 00
Enter below the model and serial numbers located on the back an
Contents 9 Connect devices 27 1 Notice 4 Connection overview 27 Selecting your connection quality 28 2 Important 5 Connecting your devices 29 Product information 5 Screen care 5 10 Troubleshooting 31 Environmental care 5 Downloading an electronic copy 31 Regulatory notices 5 Contact us 31 3 Your TV 6 11 Notes for the use of USB devices 32 Side controls and indicators 6 Remote control 6 12 Speciﬁ cations 33 4 Get started 8 Supplied accessories 8 13 Warranty 34 Mounting stand
Return your Product Registration Card or register online at www.philips.com/welcome today to get the very most from your purchase. Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome to ensure: *Proof of Purchase *Product Safety *Additional Benefits Notification Returning the enclosed card guarantees By registering your
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. C. The appliance has been exposed to rain; or 2. Keep these instructions. D. The appliance does not appear to operate normally or exhibits a 3. Heed all warnings. marked change in performance; or 4. Follow all instructions. E. The appliance has been dropped, or the enclosure damaged. 5. Do not use this apparatus near water. 17. Tilt/Stability - All televisions must comply with recommended 6.
Modiﬁ cations 1 Notice The FCC requires the user to be notiﬁ ed that any changes or modiﬁ cations made to this device that are not expressly approved by Philips Consumer Electronics may void the user’s authority to operate the equipment. 2010 © Koninklijke Philips Electronics N.V. All rights reserved. Speciﬁ cations are subject to change without notice. Trademarks are Cables the property of Koninklijke Philips Electronics N.V. or their respective Connections to this device must be made wit
Environmental care 2 Important Registering your model with Philips makes you eligible for all of the valuable beneﬁ ts listed below, so don’t miss out. Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome to ensure: • Proof of Purchase Returning the enclosed card guarantees that your date of purchase is on ﬁ le, so no additional paperwork is required from you to obtain warranty service. The packaging of this product is intended to be re
Remote control 3 Y our TV Congratulations on your purchase, and welcome to Philips! To fully beneﬁ t from the support that Philips offers, register your product at a www.philips.com/welcome b Side contr ols and indicators s c * r d q p e f f e g d o h c b a n i a Standby indicator / remote control sensor b Ambient light sensor j [ ] When in Home mode, this TV will automatically adjust the brightness based on the ambient light. If there is a sudden change in TV brightness, it may be due to ch
c FORMAT Selects a picture format (see ‘Changing picture format’ on page 16). d SAP Digital Mode (DTV) • Press to select the audio language. Analog Mode (TV) • Press to select the audio mode. e FREEZE Press to pause screen image. f OK Activates a selection or accesses the menu. g Î ï Í Æ (Navigation buttons) Navigates through the menus. h INFO Displays information about the TV channel or accessory device. The quality and accuracy of the information depends on the broadcaster. You might see a
Positioning the TV 4 Get started Warning Supplied accessories • Do not insert the AC power cord into the power socket outlet before all the connections are made. • Remote Control • Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV. • Bef ore you move the TV, disconnect attached cables to prevent damage to connectors. • 2 x AAA, 1.5V Batteries • M5 x 20 double sems screw x 4 • AC Power cord In addition to reading and understanding the safety instruct
If you connect a set-top box through RF IN / OUT Connecting the antenna or cable If the TV is connected to a cable box or satellite set-top box via a coaxial connection, set the TV to channel 3 or 4, or to the channel speciﬁ ed by the service provider. Cable If you connect to an antenna Any DTV programs that are broadcast in your area can be received for If you connect a set-top box through HDMI free through an antenna connection. If the TV is connected to a cable box or satellite set-top box
Managing cables Connecting the AC power cord Route your antenna cable and all other cables through the cable W arning management tie at the back of the TV. The holder helps keep your cables tidy and easily manageable. • Verify that your power voltage corresponds with the voltage printed at the back of the TV. Do not insert the AC power cord if the voltage is different. 1 Attach the cable management tie as illustrated below. 1 Locate the power connector at the back of the TV. The location of
Press Í or Æ 5 times to select the side of the pictures that is the most Switching on and initial setup pleasing to you. then press OK. Before you switch on the TV, check that the AC power cord is properly . . connected. Press POWER at the right side of the TV, or press on Left side Right side the remote control. The TV normally takes 25-30 seconds to start up and the following screen appears the ﬁ rst time you turn on the TV. Initial Setup Initial Setup English Select your menu languag
Switching channels 5 Use your TV This section helps you perform basic TV operations. Switching on your TV and putting it in standby mode Press CHANNEL + / − on the side of the TV. For digital channels, press a number (1 to 135) followed by a dot “ ” and then the corresponding • sub channel number (1 to 135). e.g. 108.30. • Press CH + / − or enter a number on the remote control. • Press PREV CH to return to the previously viewed channel. To switch on • Press . POWER at the side of the TV or
Adjusting v olume Still mode You can pause the image shown on the TV screen. Press FREEZE to pause the image shown on the TV screen. FREEZE • The sound output will not be paused. • If no signal is detected or protected signal is received during still mode, the image remains paused and the sound output will be muted. • The still function will be released after 5 minutes. To cancel still mode, press any button except . (standby-On). Watching channels from a set-top box To watch channels from a
Watching a Blu-ray disc Switching audio mode To watch a Blu-ray Disc This section describes how to switch audio language in digital mode and how to switch audio in analog mode. 1 Insert a Blu-ray Disc into your player. DTV 2 Press ► (play) on the remote control of the Blu-ray Disc player. » The Blu-ray Disc might automatically play on the TV. 1 Press SAP to display the currently selected language and the If the picture does not appear number of available languages. 11.1 11.1 English 1/3 Engl
Summary of picture settings 6 Use more of your TV The following picture settings can be conﬁ gured. Depending on the format of the picture source, some picture settings are not available. [ ] • Auto Picture : Sets all picture settings to the factory default. Changing pictur e and sound settings [ ] • Brightness : Adjusts the intensity and details of dark areas. [ ] When in Home mode, this TV will automatically adjust the Y ou must set [Home] in [Location] (refer to page 21). brightness bas
For 4:3 video signal Changing pictur e format 1 Press FORMAT on the remote control. [Normal][16:9] Î ï 2 Press or to select a picture format and press OK to conﬁ rm your choice. [Movie Expand] Summary of picture formats 5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display modes can be selected for PC input signal. For 16:9 video signal [Wide] [Zoom] Normal Display a 4:3 picture at its original size. Sidebars app
[ ] TV Speakers Using your TV as a PC monitor This option will allow you to select the audio output from the Use an HDMI-DVI cable or an HDMI-DVI adaptor to connect a PC to unit’s speakers. If you connect this TV to an external ampliﬁ er your TV. For sound, add an audio cable with a stereo mini jack. which is compatible with HDMI CEC, you can use volume controls on this TV to control volume on the external ampliﬁ er. Caution Press Î or ï to select the desired option, then press OK. • Bef
Sleeptimer You can always put your TV in standby mode earlier or reset the Picture sleeptimer during the countdown. Video 1 Sound Video 2 Press SLEEP to set the sleep timer. Setup Component Features Sleep Off HDMI 1 Language Sleep timer display appears on the TV screen. HDMI 2 USB HDMI 3 Press SLEEP repeatedly to change the amount of time (in increments of 30 minutes up to 120 minutes). BACK OK Back Select View / Block Sleep 120min. 3 Press Î or ï and then press OK repeatedly to switch betwe
Summary of TV ratings Summary of US movie ratings Rating Description Age rating Content rating TV -Y : Appropriate for children of all ages None NR Not rated. with themes and elements suitable for G Movies with a mild content, suitable for all ages. children aged 2-6. PG Movies for which parental guidance is recommended. TV -Y7 : Programs designed for children age 7 [FV] (Fantasy Violence) They may contain a few racy or violent scenes or and older. maybe some bad language. TV -
|1||Philips / 20PFL5522D||Flat Panel Television||181|
|2||Philips 1346||Flat Panel Television||21|
|3||Philips 107FP4||Flat Panel Television||13|
|4||Philips 0150FD9935||Flat Panel Television||10|
|5||Philips 13" Color TV 13MT1431||Flat Panel Television||15|