Our goal is to provide you with a quick access to the content of the user manual for Philips 20FT3310/37. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Philips 20FT3310/37.
If looking through the Philips 20FT3310/37 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Philips 20FT3310/37 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Philips 20FT3310/37. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
20FT3310/37 User’s Manual
Care of the screen Do not touch the screen with anything hard as this may scratch, mar or damage the screen permanently. Do not rub with dust clothes with chemical treatment. Do not touch the surface with bare hands or greasy cloth (some cosmetics are detrimental to the screen). Unplug the TV before cleaning the screen. When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks. Do not use acetone, toluene and alcohol because they c
Switch the TV on : Press the power switch on the TV. An indicator on the front of the TV lights up and the screen comes on. If the TV is in standby mode (red indicator), press the - TV+ keys or the key on the remote control. Accessing the Set-up Menu When the set is in the High Security Mode, the Setup menu can be accessed only with an Institutional Set-up Remote Control (RG4172BK or RC2573). RG4172BK RC 2573
• Language: Select the language of the installation menu. Options are “ENGLISH”, “FRANCAIS”, and “ESPANOL”. • Communication: The Communication menu is required to enable interactive applications and Healthcare Pendant controls. Refer to Annex C at the end of this document for more information. • Channel Install: This sub menu allows setting the number of television channels. • Channel Table: Allows selection between Cable and Antenna. • Current Ring: This option allows selection
In the Configuration menu, various settings and features of the TV can be adjusted. • Switch On/OSD : In this sub -menu the behavior of the TV after switching on and the behavior of the On Screen Display can be selected. • Picture/Sound: In this sub-menu, the Picture and Sound settings of the TV can be selected. • Security: In this sub-menu, the Security settings of the TV can be configured. • Control: In this sub -menu, the Control settings of the TV can be configured. • CC/V-Ch
In this sub menu, the Picture and Sound settings of the TV can be configured. • Brightness: This changes picture brilliance. • Color: This changes the intensity of the color. • Contrast: This changes the difference between the light and dark tones. • Sharpness: This changes the picture definition. • Tint: Adjusts the picture to obtain natural skin tones. • Active Control: Active Control optimises the quality of the picture according to the quality of reception. • Treble/Bass:
In this sub menu, the Control settings of the TV can be configured. • ESP: Energy Saving Programmability Mode (ESP) controls the maximum continuous viewing time allowed by the control system. The ESP Menu function is shown as "ESP", and its valid values are 00 - 99 (in hours). 00 value means OFF. • Audio/Video Mute: The Audio/Video Mute menu function determines whether the video should be blanked and the audio muted, if the currently tuned channel has no signal. • Source Men
The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). 16:9 pictures sometimes have a black band at the top and bottom of the screen (letterbox format). This function allows you to optimize the picture display on screen. Using the different formats Select the preferred format from the Switch ON/OSD Menu in the setup screen, or (if applicable) use the 16:9 Formats button on the Remote Control to select the different modes: 4:3, Z
Should your remote be lost or broken you can still change some of the basic settings with the keys on top of your TV. Keys on top of TV Press: • The – Vol + key to adjust the volume; • The – P/CH+ key to select the TV channels or source Press the MENU/OK key to summon the main menu without the remote control (not available on all TVs). Use: • The – Vol + key and the – P/CH+ key to select menu items in the directions as shown; • The MENU/OK key to remove the menu - 9 -
This section provides information on the connectivity available for the LCD Television set. 20” LCD TVs Connectors on the 20” LCD TV 1. TV and Radio antenna sockets 2. Component Video Inputs (CVI) connectors – Y, Pb, Pr, 1fH (480i) 3. Audio-In connectors (AV1) 4. Video-In connector (AV1) 5. Progressive Scan Input for connecting Y, Pb, Pr, 2fH (480p) 6. Side IO Connectors (AV2) – Headphones, Audio-In, Video-In, S-Video, and PC-Audio In 7. Int
This section provides information on mounting the stand for the LCD Television set. 20” LCD TVs - 11 -
Annex A Health Care Pendant / Pillow Speaker Operation The Philips 20FT3310 Institutional Television product can be used in hospitals and other medical facilities. It is compatible with a type of device known as a “pillow speaker” or “pendant control”. This device contains a built-in speaker for bedside audio, while also providing television power, channel, and volume control functions, all by means of a three-conductor cable. Examples of two such devices are described herein. The followin
Annex B Connection Information for Healthcare Pendant The following diagram illustrates the connection of the Healthcare Pendant Control to the Philips LCD TV. - 13 -
Annex C Communication Menu of the LCD TV The Communication Menu allows the selection of different communications protocols between the LCD TV and external interactive devices that may be connected to the TV. By default, the Communication setting should be set to “OFF”. In order to select the appropriate Communication setting, refer to the application notes or installation documentation that is provided with the external interactive devices. The Communication Menu also allows a Pendant C
|1||Philips / 20PFL5522D||Flat Panel Television||177|
|2||Philips 1346||Flat Panel Television||18|
|3||Philips 107FP4||Flat Panel Television||13|
|4||Philips 0150FD9935||Flat Panel Television||10|
|5||Philips 13" Color TV 13MT1431||Flat Panel Television||15|