RCA LCDS2022B user manual

User manual for the device RCA LCDS2022B

Device: RCA LCDS2022B
Size: 0,97 MB
Date of adding : 2014-05-08 16:40:39
Number of pages: 40
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for RCA LCDS2022B. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with RCA LCDS2022B.

For your convenience

If looking through the RCA LCDS2022B user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manualRCA LCDS2022B on full screen, use the buttonFullscreen.
  • Downloading to your computer - You can also download the user manual RCA LCDS2022B to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
RCA LCDS2022B user manual
Advertisement
« Page 1 of 40 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual RCA LCDS2022B but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to RCA LCDS2022B. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

LCD Television
User’s Guide
Changing Entertainment. Again.
16278150.0 Cover 1 12/11/03, 2:03 PM

Summary of the content on the page No. 2

Important Information CAUTION This symbol indicates important instructions accompanying the product. RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates "dangerous voltage" Caution: To reduce the risk of electric shock, do not inside the product that presents a risk of remove cover (or back). No user serviceable parts electric shock or personal injury. inside. Refer servicing to qualified service personnel. Refer to the identification/rating label located on the back panel of your WARNING p

Summary of the content on the page No. 3

Important Information Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safe

Summary of the content on the page No. 4

This page left intentionally blank. 16278150.0 Cover 4 12/11/03, 2:03 PM

Summary of the content on the page No. 5

Table of Contents Chapter 1: Connections & Setup Things to Consider Before You Connect ........................................................................................ 3 Protect Against Power Surges.................................................................................................. 3 Protect Components from Overheating.................................................................................. 3 Important Stand and Base Safety Information .............................

Summary of the content on the page No. 6

Table of Contents Chapter 4: Using the TV’s Menu System Menus, On-screen Help, and Control Panels ............................................................................... 24 Exiting a menu ........................................................................................................................ 24 Controls ................................................................................................................................... 24 Picture Menu .......................

Summary of the content on the page No. 7

Chapter 1: Connections & Setup Things to Consider Before You Connect Protect Against Power Surges • Connect all components before you plug any of their power cords into the wall outlet or power strip. NEVER plug your TV into an outlet that is controlled by a wall switch. •Turn off the TV and/or component(s) before you connect or disconnect any cables. • Make sure all antennas and cables are properly grounded. Refer to the Important Safeguards sheet packed with your TV. Protect Components from Ov

Summary of the content on the page No. 8

Connections & Setup Explanation of Jacks This section describes the jacks and cables you might use to make connections. There are several ways to connect components to your TV. Different jacks and cables provide a different level of performance. It’s important to remember the different degrees of picture improvement for comparison. The RGB/YPbPr (component) jack is considered an excellent improvement; S-Video and Video (composite) jacks are considered very good; while the Antenna/Cable connectio

Summary of the content on the page No. 9

Connections & Setup Back Panel VID2 • RGB/YPbPr (mini D-sub 15 pin) For connection of components that have RGB or component output jacks (Y, Pb, Pr), such as a personal computer, HD receiver, DVD player, or external RGB decoder. The RGB/YPbPr jack provides excellent picture quality because the video is separated into three signals. If your component has Y, Pb, Pr jacks, use the supplied 15 pin D-sub to component video cable adapter. Connect component video cables to the end of the adapter. • Aud

Summary of the content on the page No. 10

Connections & Setup Remove the Plate On the Back Panel You need to remove the plate on the back panel in order to use the jacks. As the picture to the left shows, push down on the tab and pull out the back plate carefully. When you are finished connecting a component to the jacks, replace the plate. Connect Your Cable Connect your cable or antenna to the Antenna/Cable jack on the bottom panel of the TV using a coaxial cable. VID1 Antenna/Cable S-Video In Audio In Video In CABLE R L/mono OR OFF-A

Summary of the content on the page No. 11

Connections & Setup Using VID2 Connect a component, such as a DVD player or digital cable box, to the TV using the VID2 jacks. Connect the supplied 15 pin D-sub to component video cable adapter to the RGB/YPbPr jack on the back of the TV. Then connect component video cables to the adapter and connect the other end to the component video jacks (Y, Pb, Pr) on the component. Connect the supplied 3.5mm mini phone to audio cable adapter to the Audio In jack on the back of the TV. Connect audio cable

Summary of the content on the page No. 12

Connections & Setup Plug in the TV Plug the end of the cord from the power adapter into the 19V DC In Power jack on the bottom panel of the TV. Then connect the end of the power cord into the other end of the power adapter. Plug the end of the power cord into an appropriate wall outlet. Be sure to insert the plug completely. Do not plug into an outlet controlled by a light switch. Put batteries in the remote • Remove the battery compartment cover from the back of the remote by pushing down on an

Summary of the content on the page No. 13

Connections & Setup Choose the Menu Language MAIN MENU Select your preferred language for the menu system. Picture 1. From the Main menu, press the down arrow button to highlight Sound Preferences, then press OK (the Preferences menu appears with Parental Control Language highlighted). Preferences 2. The default language is English. To select French or Spanish, Setup press the right arrow button. Preferences Language English. . . Press MENU or CLEAR to exit. Closed Caption. . . Menu Ti

Summary of the content on the page No. 14

Connections & Setup Set VID2 Source Setup If you have a component connected to the VID2 jacks on the TV, you need to set the VID2 source. Signal Type Cable. . . Auto Channel Search Start. . . 1. From the Setup menu, press the down arrow button to highlight Autotuning. . . Set VID2 Source. Channel List. . . 2. Press the right arrow button to select Y Pb Pr, if your component Set VID2 Source PC. . . connected to VID2 has Y, Pb, Pr jacks; or select PC if connected to a PC

Summary of the content on the page No. 15

Chapter 2: Using the Remote Control Indicator Button Descriptions for TV Mode Arrows Used to highlight different items in the TV menu and to adjust the menu controls. ON OFF DVD Indicator Indicates the programming mode when programming the VCR TV remote to control components. Lights when you press a valid button on the remote. Flickers when a button is pressed and the batteries are low. (0-9) Number Buttons Enter channel numbers and password CH VOL MUTE GO BACK settings directly through the rem

Summary of the content on the page No. 16

Using the Remote Control DVD Puts the remote in DVD mode and, if auto tuning is enabled, will turn on the TV and tune to the correct video input channel. Also used with the ON•OFF button to turn on other compatible DVD players. GUIDE If you’re operating another component that has an on-screen program guide, this button accesses the on-screen guide. OPEN•CLOSE In DVD mode, opens or closes the DVD disc tray. REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed, provides transport control for

Summary of the content on the page No. 17

Using the Remote Control Using Automatic Code Search The following instructions can be used to program the remote to operate each of your components. If you want to stop the automatic code search without programming any of your components, press CLEAR until the indicator on the remote turns off. 1. Turn on the component you want to operate (VCR or DVD player) 2. Press and hold the component button you want to program (VCR or DVD). While holding the component button, press and hold ON•OFF until t

Summary of the content on the page No. 18

Using the Remote Control Remote Control Codes VCR Codes Programmable for VCR button. Admiral ....................................................................................................................... 2132 Olympus .................................................................................................................. 2021 Adventura ................................................................................................................... 2026 Optimus ...............

Summary of the content on the page No. 19

Chapter 3: Using the TV’s Features About the Channel Banner 8 The Channel Banner appears when you press the TV or INFO button on the remote. The following list describes the items on the Channel Banner screen (left to right and top to bottom). Other displays that are not described here are self-explanatory. The icons change appearance to show the item’s status or availability. 8 Displays the current channel you are watching or input you are tuned to. Mute Icon Displayed when you mute the sound.

Summary of the content on the page No. 20

Using the TV’s Features N/A Choose this if you don’t have this particular component connected to the TV, or if you don’t want the TV to automatically tune Autotuning to the correct channel when you’re using this component. Set VCR Ch/Input 03. . . 03 Component is connected to the Antenna/Cable jack on the bottom Set DVD Ch/Input VID2. . . panel of the TV, and you want the TV to tune to channel 3 or 4 when you press the corresponding button on the remote. Reminder: make sure the comp


Similar user manuals
# User manual Category Download
1 RCA 20F512T Flat Panel Television 52
2 RCA 20F650T Flat Panel Television 39
3 RCA 20F542T Flat Panel Television 17
4 RCA 1622254A Flat Panel Television 26
5 RCA 20F501TDV Flat Panel Television 23