Our goal is to provide you with a quick access to the content of the user manual for RCA LED47A55RS. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with RCA LED47A55RS.
If looking through the RCA LED47A55RS user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual RCA LED47A55RS but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to RCA LED47A55RS. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Important to user FCC Statement NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority. NOTE: This equipment has been tested and found to comply with the limits for a class B digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment genera
Important Safety Precautions Safeguards The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s RISK OF ELECTRIC SHOCK enclosure that may be of sufficient magnitude DO NOT OPEN! to constitute a risk of electric to persons. TO REDUCE THE RISK OF AN ELECTRIC The exclamation point within an SHOCK, DO NOT REMOVE THE COVER (OR equilateral triangle is intended to alert BAC
Important Safety Precautions Safeguards 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, when liquid has been spilled or when objects have fallen into the apparatus, or when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. POWER SOURCE: This TV should be operated only fro
Important Safety Precautions Safeguards 20. OVERLOADING: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 21. OUTDOOR USE: Do not install this TV outdoor. If the TV is exposed to rain, it may result in a fire or an electric shock. If the TV is exposed to direct sunlight, the TV may heat up and cause damage to the TV. 22. VEHICLE: Do not install the TV in a vehicle. Bumping of the vehicle may cause the TV
Important Safety Precautions Safety Strap v
Table of Contents Table of Contents 1.Important to user...................................................................................... i 2.Important safety precautions.................................................................... ii Safeguards....................................................................................... ii Safety Strap...................................... .................................................
Setting Up Installing the Stand/Wall mount specifications Installing the Stand 1. Lay a cloth or another soft material on a flat surface to avoid damage to the LCD screen. 2. Put the TV back upward and the LCD screen downward and keep it flat on the table-board. 3. Take out the stand and insert the stand into the installing slot in the lower part of the TV, then put the stand to relevant position of the TV set until all the holes match each other completely. 4. Fasten the stand and the T
Setting Up Wall mount LED47A55RS LED42A55RS Unit Dimension(Unit:mm) 200 200 200 200 Screw Diameter M6 M6 Screw Length(Unit:mm) 25 25 8
Setting Up Wall mount Wall mount When Installing the TV Against a Wall or Enclosed Area Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the TV at temperatures below Inadequate air 45° F (5 ) Instand with stand 12 inches 30cm 4 inches 10cm 2.375 inches 6cm Leave at least this much space around the set. 12 inches Install on the wall 30cm 4 inches 4 inches 10cm 10cm Leave at least this much space around the set. 4 inches 10cm
Setting Up TV Front Model Number LED42A55RS LED4755ARS Note:Touch the silk print area according to the need, the TV will response correctly. Blue The light is off when TV is turned on. 10
Setting Up TV Rear TV Rear COMPONENT2 Y P P L R B R SERVICE VIDEO COAXIAL HDMI 4 AV2 The cable tie is only used for the power cord. Note: The appearance of LED42A55RS,LED47A55RS are similar, the picture above is for reference only. 11 COMPONENT1 OUT L R Y P P B R VGA AUDIO HDMI3 HDMI2 HDMI1 VIDEO ANT75Ω L R AV1
Setting Up Connect to other devices Warning: Before connecting the TV to any other electronic device, unplug the TV and electronic device AC cords from the AC input. Note: Not all following terminals are included on your TV. The actual one refer to "TV Rear". 1. Connect to broadcast antenna or the cable TV To have an optimal picture quality, it is strongly recommended to have an external antenna or a cable TV. Note: - It is recommended that coaxial cable (75Ω ) be used to eliminat
Setting Up Connect to other devices 3. Connecting Component Devices (DVD, DVR (digital video recorder), Blu-Ray) Component video(Y, Pb, Pr)transmits video as separate Y, Pb, Pr signals. Use this connection for high-definition video signals from a DVD or other equipment. - Connect Component video and audio cables to Component inputs (“PR/CR”, “PB/CB”, “Y”) of your set and the other ends to corresponding component video out connectors on the PVR or DVD. - The "Y, PB/CB
Setting Up Connect to other devices 5. Connect to PC - Connect the D- Sub cable to “VGA” on the side of your set and the other end to the Video Card of your computer. - Connect the stereo audio cable to “PC AUDIO ” on the side of your set and the other end to “Audio Out” of the sound card on your computer. Note: For some sets "PC AUDIO" share with component. Computer 6. Connect to headphone - Connect the headphone jack of the TV set. The volume of the headphone is auto
Using the Remote Control Installing batteries Installing the remote control batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size(1.5V) batteries. Match the “+” and “-” signs on the batteries to the signs on the battery compartment. 3. Close the battery cover. Note: 1. Dispose of your batteries in a designated disposal area. Do not throw the batteries into fire. 2. Do not mix battery types or combine used batteries with new on
Using the Remote Control Learning about the remote control panel Remote Control Panel Buttons instructions (1) Power On/Off. (2) Power indicator. (3) INPUT: Switch among TV, Video, Component, HDMI and 2 VGA. (4) 0-9 Numbers: For direct channel access. (5) Last: Return to previous channel. 1 (6) — : Select digital channels. (7) PICTURE: Picture Mode selecting. (8) SOUND: Sound Mode selecting. (9) DISPLAY: Display current status information
Using the Remote Control Quick starts Basic Operation Connecting power cord to the TV 1. Connect the power cord to the connector on the back of the TV, if the power cord in accessories. Note:When connecting the power cord to the connector of the TV, make sure the power cord is fully inserted in the place. Bad contact may cause high temperature of the connector and the risk of fire or other damages. 2. Connect the power cord to the AC power outlet. Power ON/OFF 1. Connect the
Using the Remote Control Quick starts Use [EXIT] button Press the [EXIT] button to exit the OSD menu. Select channels by numbers To select a channel: Press the channel number you would like to go to. For example, to select channel number 120, press buttons 1, 2 and 0, respectively and then press [ENTER] to confirm. Use [MENU] button Press the [MENU] button to display the TV OSD menu. Use [LAST] button Press the [LAST] button to return to the previous channel. Use [ENTER] butto
Changing the TV Settings Using the TV Menu 19
|1||RCA 20F512T||Flat Panel Television||52|
|2||RCA 20F650T||Flat Panel Television||13|
|3||RCA 20F542T||Flat Panel Television||30|
|4||RCA 1622254A||Flat Panel Television||35|
|5||RCA 20F501TDV||Flat Panel Television||29|