Samsung 245BPLUS user manual

User manual for the device Samsung 245BPLUS

Device: Samsung 245BPLUS
Size: 1,29 MB
Date of adding : 2014-08-26 16:40:57
Number of pages: 16
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Samsung 245BPLUS. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Samsung 245BPLUS.

For your convenience

If looking through the Samsung 245BPLUS user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manualSamsung 245BPLUS on full screen, use the buttonFullscreen.
  • Downloading to your computer - You can also download the user manual Samsung 245BPLUS to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Samsung 245BPLUS user manual
Advertisement
« Page 1 of 16 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Samsung 245BPLUS but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Samsung 245BPLUS. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

LCD MONITOR
quick start guide
245BPLUS


Summary of the content on the page No. 2

Package Contents Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Without Stand Monitor With Stand Monitor & Sliding Stand Manual

Summary of the content on the page No. 3

Warranty Card User's Guide, Monitor Driver, Quick Setup Guide (Not available in all Natural Color, locations) MagicTune™ Cable Power Cord D-sub Cable Sold separately DVI Cable Others Cleaning Cloth This is only provided for highly polished black products as a product feature. Speaker package(option) Speaker Your Monitor Front

Summary of the content on the page No. 4

Opens the on-screen menu and exits from the menu. MENU button [ ] MagicBright™ button MagicBright™ is a new feature providing optimum viewing [] environment depending on the contents of the image you are watching. Currently seven different modes are available: Custom, Text, Internet, Game, Sport and Movie, Dynamic Contrast. Each mode has its own pre-configured brightness value. You can easily select one of seven settings by simply pressing MagicBright™ control button. 1)

Summary of the content on the page No. 5

Enter button [ ] / Activates a highlighted menu item. / Source button Push the ' ', then selects the video signal while the OSD is off. (When the button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode -- analog or digital input signal.) If you select the digital mode, you must connect your monitor to the graphic card's DVI IN(HDCP) port using the DVI cable. >> Click here to see an animation clip AUTO button Use this bu

Summary of the content on the page No. 6

RGB IN : Connect the RGB IN terminal at the back of your monitor to your computer. AUDIO POWER Connect the speaker power line connected to the speaker to the AUDIO POWER terminal of the monitor Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact where you purchase it. Stand Stopper Remove the fixing pi

Summary of the content on the page No. 7

Connecting Cables Connect the power cord for your monitor to the POWER port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use appropriate connection for your computer. Using the RGB (Analog) connector on the video card. - Connect the signal cable to the 15-pin, RGB IN port on the back of your monitor. [ RGB IN ] Using the DVI (Digital) connector on the video card. - Connect the DVI cable to the DVI IN(HDCP) port on the back of your mon

Summary of the content on the page No. 8

When connecting a speaker, be careful that the grooves of the monitor and the speaker . ( )are aligned with each other. Adjust the aligned positions until you hear a ‘click’. If a speaker is connected correctly, you can hear a ‘click’.If a speaker is connected without you hearing a ‘click’, the holding part may become damaged. If you need to separate, please pull ( ) a little and push to the right. MIC / SPK Connect the red cable of the cables provided when the speaker was pu

Summary of the content on the page No. 9

By turning part ( + , - ) in the direction shown in the figure below, the speaker turns on and the volume increases. Connect the power line connected to the speaker to the black terminal of the monitor. This speaker is not connected to an external power source. It is connected to a monitor for the required power. Using the Stand Sliding stand Stand Stopper Swivel stand Using ( ),You can swivel the monitor left and right at an angle of 350° to set the monitor lengthwise.

Summary of the content on the page No. 10

Tilt angle Using ( ), You can adjust the tilt anlgle within a range of 3° forward to 25° backward for the most comfortable viewing angle. Attaching a Base This monitor accepts a 200 mm x 100 mm VESA-compliant Mounting interface pad. Monitor Mounting interface pad (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove four screws and then

Summary of the content on the page No. 11

4. Align the mounting interface Pad with the holes in the rear cover mounting pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base. Do not use screws longer than the standard dimension, as they may damage the inside of the Monitor. For wall mounts that do not comply with VESA standard screw specifications, the length of the screws may differ depending on their specifications. Do not use screws that do not comply with the VESA standard

Summary of the content on the page No. 12

Check List Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. Symptom Check List Solutions No images on the Is the power cord Check the power cord connection and supply. screen. connected I cannot turn on properly? the monitor. Can you see (Connected using the D-sub cable) "Check signal Check the signal cable connec

Summary of the content on the page No. 13

indicator on the restore the image on the screen. monitor blinking at 1 second intervals? If there is still no image, press the ' ' button. Then press any key on the keyboard again to activate the monitor and restore the image on the screen. Connected using You may get a blank screen if you boot the system the DVI cable? before you connect the DVI cable, or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video

Summary of the content on the page No. 14

reads See the video card Install the monitor driver according to the Driver "Unrecognized manual to see if the Installation Instructions. monitor, Plug & Plug & Play (VESA Play (VESA DDC) DDC) function can monitor found". be supported. Check when MagicTune™ * To check whether your PC is available for MagicTune™ MagicTune™ does feature is found only feature, follow the steps below (When Windows is XP); not function on PC (VGA) with properly. Window OS that Control Panel → Performance and

Summary of the content on the page No. 15

Windows ME/2000 : Set the resolution at the Control Panel → Display → Settings. Contact the video card manufacturer for details. How can I set the Power Saving function? Windows XP : Set the resolution at the Control Panel → Appearance and Themes Display Screen → → Saver. Set the function at BIOS-SETUP of the computer. Windows ME/2000 : Set the resolution at the Control Panel → Display → Screen Saver. Set the function at BIOS-SETUP of the computer. Refer to Windows/Co

Summary of the content on the page No. 16

Environment The location and the position of the monitor may influence the quality and other features of the monitor. If there are any sub woofer speakers near the monitor, unplug and relocate the woofer to another room. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the monitor. Useful Tips A monitor recreates visual signals received from the computer. Therefore, if there is trouble with the computer or the


Similar user manuals
# User manual Category Download
1 Samsung 400FP-3 Flat Panel Television 333
2 Samsung 32IN Flat Panel Television 303
3 Samsung 350 BN68 Flat Panel Television 431
4 Samsung 320TSn-3 Flat Panel Television 57
5 Samsung 400MX-3 Flat Panel Television 63