Craftsman 82140 user manual

User manual for the device Craftsman 82140

Device: Craftsman 82140
Category: Bicycle
Manufacturer: Craftsman
Size: 0.67 MB
Added : 6/12/2014
Number of pages: 21
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Craftsman 82140. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Craftsman 82140.

For your convenience

If looking through the Craftsman 82140 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Craftsman 82140 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Craftsman 82140 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Craftsman 82140 User manual - Online PDF
Advertisement
« Page 1 of 21 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Craftsman 82140 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Craftsman 82140. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Owner's Manual




Digital MultiMeter
Model No. 82140

and

Voltage Detector
Model No. 82174











! Safety
CAUTION: Read, understand and

! Operation
follow Safety Rules and Operating

Instructions in this manual before
! Maintenance

using this product.
! Español


© Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.craftsman.com 070606
1

Summary of the content on the page No. 2

TABLE OF CONTENTS Page Warranty 3 Safety Instructions 4 Safety Symbols 5 Control and Jacks 6 Symbols and Annunciators 6 Specifications 7 Battery Installation 9 Operating Instructions 10 DC Voltage Measurements 10 AC Voltage Measurements 11 DC Current Measurements 12 Resistance Measurements 13 Continuity Check 13 Diode Test 14 Battery Test 14 Maintenance 15 Replacing Batteries 16 Replacing Fuses 16 Troubleshooting 17 Service and Parts 17 Model 82174 instructions 18 2

Summary of the content on the page No. 3

ONE YEAR FULL WARRANTY ONE YEAR FULL WARRANTY ON CRAFTSMAN MANUAL RANGING MULTIMETER If this CRAFTSMAN Manual Ranging MultiMeter fails to give complete satisfaction within one year from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE OR OTHER CRAFTSMAN OUTLET IN THE UNITED STATES, and Sears will replace it, free of charge. If this CRAFTSMAN Manual Ranging MultiMeter is used for commercial or rental purposes, this warranty applies for 90 days from the date of purchase. This w

Summary of the content on the page No. 4

SAFETY INSTRUCTIONS This meter has been designed for safe use, but must be operated with caution. The rules listed below must be carefully followed for safe operation. 1. NEVER apply voltage or current to the meter that exceeds the specified maximum: Input Limits Function Maximum Input VAC 600V DC/AC V DC or V AC 600V DC/AC, 200Vrms on 200mV range mA DC 200mA 250V fast acting fuse A DC 10A 250V fast acting fuse(30 seconds max every 15 minutes) Resistance, Continuity 250Vrms for 15sec

Summary of the content on the page No. 5

SAFETY SYMBOLS This symbol adjacent to another symbol, terminal or operating device indicates that the operator must refer to an explanation in the Operating Instructions to avoid personal injury or damage to the meter. This WARNING symbol indicates a potentially WARNING hazardous situation, which if not avoided, could result in death or serious injury. This CAUTION symbol indicates a potentially CAUTION hazardous situation, which if not avoided, may result damage to the product. MA

Summary of the content on the page No. 6

CONTROLS AND JACKS 1. LCD Display 2. Function switch 1 3. COM jack 4. 10A jack 2 5. Positive jack Note: Tilt stand, fuse and battery 3 compartment are on rear of unit. 4 5 SYMBOLS AND ANNUNCIATORS •))) Continuity Diode test " micro (amps) m milli ( volts, amps) k kilo (ohms) ##$# ohms VDC volts direct current VAC volts alternating current ADC amps direct current BAT Battery test 6

Summary of the content on the page No. 7

SPECIFICATIONS Function Range Resolution Accuracy DC Voltage 200mV 0.1mV %(0.5% reading + 2 digits) (V DC) 2000mV 1mV 20V 0.01V 200V 0.1V 600V 1V AC Voltage 200V 0.1V %(1.2% reading + 10 digits (V AC) 600V 1V (50/60Hz) DC Current 2000"A 1"A %(1.0% reading + 2 digits) (A DC) 20mA 10"A 200mA 100"A %(1.2% reading + 2 digits) 10A 10mA %(2.0% reading + 2 digits) Resistance 200$ 0.1$ %(0.8% reading + 2 digits) 2000$ 1$ 20k$ 0.01k$ 200k$ 0.1k$ 2000k$ 1k$ %(1.0% reading + 2 digi

Summary of the content on the page No. 8

SPECIFICATIONS Diode Test Test current of 1mA maximum, open circuit voltage 2.8V DC typical Continuity Check Audible signal will sound if the resistance is less than approximately 30$ Battery Test current 9V (6mA); 1.5V (100mA) Input Impedance >1M! ACV Bandwidth 45Hz to 450Hz DCA voltage drop 200mV Display 3 ½ digit, 2000 count LCD, 0.5” digits Overrange indication “1” is displayed Polarity Automatic (no indication for positive polarity); Minus (-) sign for negative polarity. Measur

Summary of the content on the page No. 9

BATTERY INSTALLATION WARNING: To avoid electric shock, disconnect the test leads from any source of voltage before removing the battery door. 1. Disconnect the test leads from the meter. 2. Remove the protective rubber holster (if installed). 3. Open the battery door by loosening the screw using a Phillips head screwdriver. 4. Insert the battery into battery holder, observing the correct polarity. 5. Put the battery door back in place. Secure with the screw. WARNING: To avoid electric

Summary of the content on the page No. 10

OPERATING INSTRUCTIONS WARNING: Risk of electrocution. High-voltage circuits, both AC and DC, are very dangerous and should be measured with great care. 1. ALWAYS turn the function switch to the OFF position when the meter is not in use. 2. If “OL” appears in the display during a measurement, the value exceeds the range you have selected. Change to a higher range. NOTE: On some low AC and DC voltage ranges, with the test leads not connected to a device, the display may show a random, ch

Summary of the content on the page No. 11

AC VOLTAGE MEASUREMENTS WARNING: Risk of Electrocution. The probe tips may not be long enough to contact the live parts inside some 240V outlets for appliances because the contacts are recessed deep in the outlets. As a result, the reading may show 0 volts when the outlet actually has voltage on it. Make sure the probe tips are touching the metal contacts inside the outlet before assuming that no voltage is present. CAUTION: Do not measure AC voltages if a motor on the circuit is bei

Summary of the content on the page No. 12

DC CURRENT MEASUREMENTS CAUTION: Do not make current measurements on the 10A scale for longer than 30 seconds. Exceeding 30 seconds may cause damage to the meter and/or the test leads. 1. Insert the black test lead banana plug into the negative (COM) jack. 2. For current measurements up to 200mA DC, set the function switch to the highest DC mA position and insert the red test lead banana plug into the (mA) jack. 3. For current measurements up to 10A DC, set the function switch to th

Summary of the content on the page No. 13

RESISTANCE MEASUREMENTS WARNING: To avoid electric shock, disconnect power to the unit under test and discharge all capacitors before taking any resistance measurements. Remove the batteries and unplug the line cords. 1. Set the function switch to the highest $# position. 2. Insert the black test lead banana plug into the negative (COM) jack Insert the red test lead banana plug into the positive $ jack. 3. Touch the test probe tips across the circuit or part under test. It is best to

Summary of the content on the page No. 14

DIODE TEST 1. Insert the black test lead banana plug into the negative COM jack and the red test lead banana plug into the positive diode jack. 2. Turn the rotary switch to the / •))) position. 3. Touch the test probes to the diode under test. Forward voltage will indicate 400 to 700mV. Reverse voltage will indicate “I”. Shorted devices will indicate near 0mV. Shorted devices will indicate near 0mV and an open device will indicate “I” in both polarities. BATTERY TEST 1. Insert

Summary of the content on the page No. 15

MAINTENANCE WARNING: To avoid electric shock, disconnect the test leads from any source of voltage before removing the back cover or the battery or fuse doors. WARNING: To avoid electric shock, do not operate your meter until the battery and fuse doors are in place and fastened securely. This MultiMeter is designed to provide years of dependable service, if the following care instructions are performed: 1. KEEP THE METER DRY. If it gets wet, wipe it off. 2. USE AND STORE THE METER IN

Summary of the content on the page No. 16

REPLACING THE BATTERIES WARNING: To avoid electric shock, disconnect the test leads from any source of voltage before removing the battery door. 1. When the batteries become exhausted or drop below the operating voltage, “BAT” will appear in the right-hand side of the LCD display. The batteries should be replaced. 2. Follow instructions for installing batteries. See the Battery Installation section of this manual. 3. Dispose of the old batteries properly. WARNING: To avoid electric shoc

Summary of the content on the page No. 17

TROUBLESHOOTING There may be times when your meter does not operate properly. Here are some common problems that you may have and some easy solutions to them. Meter Does Not Operate: 1. Always read all the instructions in this manual before use. 2. Check to be sure the batteries are properly installed. 3. Check to be sure the batteries are good. 4. If the battery is good and the meter still does not operate, check to be sure that both ends of the fuse are properly installed. If You Do

Summary of the content on the page No. 18

Owner's Manual Voltage Detector Model No. 82174 CAUTION: Read, understand and follow Safety Rules and Operating Instructions in this manual before using this product. © Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.craftsman.com 022205 FIVE YEAR FULL WARRANTY FIVE YEAR FULL WARRANTY ON CRAFTSMAN Voltage Detector. If this CRAFTSMAN Voltage Detector fails to give complete satisfaction within five years from the date

Summary of the content on the page No. 19

WARNING: USE EXTREME CAUTION IN THE USE OF THIS DEVICE. Improper use of this device can result in injury or death. Follow all safeguards suggested in this manual in addition to the normal safety precautions used in working with electrical circuits. DO NOT service this device if you are not qualified to do so. SAFETY SYMBOLS This symbol adjacent to another symbol, terminal or operating device indicates that the operator must refer to an explanation in the Operating Instructions to av

Summary of the content on the page No. 20

SPECIFICATIONS Voltage Sensitivity 100 to 240V AC Frequency 50/60Hz Detection distance <0.2” Over voltage Category III 600V o o Operating Temperature 32 to 122 F (0 to 50 C) o o Storage Temperature -4 to 140 F (-20 to 60 C) Humidity <85%RH Altitude <2000 meters (6561 feet) Battery 2 AAA batteries Dimensions/Weight 6x0.75x1 inches / 2oz Safety For indoor use and in accordance with Overvoltage Category III, Pollution Degree 2. BATTERY INSTALLATION 6. Open the battery door (


Alternative user manuals
# User manual Category Download
1 ADS Technologies INSTANT DVD 2 User manual Bicycle 14
2 Apollo Radius User manual Bicycle 5
3 Bajaj Electricals HT65/MB165 User manual Bicycle 1
4 Bajaj Electricals DB30 User manual Bicycle 7
5 BodyCraft SPX User manual Bicycle 3
6 BodyCraft VF803J User manual Bicycle 1
7 BodyCraft TourTrainer none User manual Bicycle 1
8 BodyCraft Tour Trainer Indoor Cycle User manual Bicycle 1
9 Bontrager Race XXX Lite User manual Bicycle 7
10 Bontrager Aerobar Race X Lite User manual Bicycle 6
11 Bontrager Race XXX Lite Road Crankset 283415 User manual Bicycle 0
12 Bontrager Road Brakeset Speed LimitTM User manual Bicycle 0
13 Cannondale s User manual Bicycle 23
14 Cannondale SCALPEL 100 User manual Bicycle 16
15 Cateye EC-2300R User manual Bicycle 8