Our goal is to provide you with a quick access to the content of the user manual for Sharp Aquos LC 20D30U. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Sharp Aquos LC 20D30U.
If looking through the Sharp Aquos LC 20D30U user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Sharp Aquos LC 20D30U but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Sharp Aquos LC 20D30U. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN MANUAL DE OPERAÇÃO
LIQUID CRYSTAL TELEVISION
TELEVISOR CON PANTALLA DE
TELEVISOR DE CRISTAL LÍQUIDO
MANUAL DE OPERACIÓN
MANUAL DE OPERAÇÃO
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
Printed in Mexico
Products that have earned the ENERGY STAR are designed to protect the environment
Imprimé au Mexique
Impreso en M
Dimensional Drawings Unit: inch (mm) 31 10 /64 (266) 43 5 /64 (144) 15 (381) 5 1 2 /8 4 /32 15 (66.5) (102) 21 /64 (539) 17 17 /32 (445.2) 17 9 /32 (242) 61 3 /64 (100) LC-20D30U_E_Hyo1-4.indd 2 2005/12/16 11:10:34 61 3 /64 (100) 9 17 /64 (435) 9 45 2 /64 1 /64 7 (43) (54) 15 /16 (392) 57 9 /64 (251) 31 10 /64 (266) 5 16 /16 (414)
LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: Model No.: To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear of the TV. Serial No.: IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning ﬂash with arrow-head symbol, CAUTION within an equilateral triangle, is intended to alert the user to the pr
IMPORTANT INFORMATION (Continued) CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUN
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. IMPORTANT SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY PRECAUTIONS (Continued) ■ Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. ■ Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. ■ Stand—Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product
IMPORTANT SAFETY PRECAUTIONS (Continued) ■ If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, con
Contents IMPORTANT INFORMATION ..................................... 1 PICTURE Adjustments ........................................ 22 Trademark .................................................................. 2 COLOR TEMPERATURE ................................... 23 DEAR SHARP CUSTOMER ....................................... 3 I/P SETTING ....................................................... 23 IMPORTANT SAFETY PRECAUTIONS ..................... 3 NOISE CLEAN ...............................
Before Using the LCD TV Set To use your LCD TV set, perform steps below. Check the supplied accessories. (See page 6.) 1 Insert two “AAA” size batteries into the remote control. (See page 8.) 2 • Open the battery cover, and then insert batteries with their terminals corresponding to the (+) and (-) indications in the battery compartment. Open the terminal cover. (See page 9.) 3 • Pull down the hook located on the upper side of terminal cover to open the cover. Connect the antenna cable. (See pa
Preparation Installing Batteries in the Remote Control Before using the LCD TV set for the ﬁrst time, install the two “AAA” size batteries supplied in the remote control. When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries. Open the battery cover. Insert two “AAA” size batteries. Close the battery cover. 1 2 3 ■ Slide the cover while ■ Place batteries with their ■ Engaging the lower pressing the ( ) terminals corresp
Preparation (Continued) Antenna Connection ANTENNAS • The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems. F-type connector 1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a termi
Preparation (Continued) Antenna Connection (Continued) CABLE TV (CATV) CONNECTION • A 75-ohm coaxial cable connector is built into the LCD TV set for easy hookup. When connecting the 75-ohm coaxial cable to the LCD TV set, screw the 75-ohm cable to the ANT terminal. • Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converte
Part Names of the Main Unit Controls How to adjust the angle Upper control panel ( ) ( ) CH / INPUT ( ) ( ) MENU POWER VOL / Tilt the display by grabbing onto the carrying handle while securely holding down the stand with your other hand. To change the vertical angle of the LCD TV set, tilt the screen up to 2.5 degrees forward Speaker or 10 degrees backward. Please adjust the angle so that the LCD TV set can be watched most comfortably. Headphone jack ( ) Plug the headphone mini
Part Names of the Main Unit (Continued) Terminals Carrying handle Round lock for Kensington Security Standard slot* Rear View * Using the Kensington Lock • This LCD TV set has a Kensington Security Standard slot for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the LCD TV set. AC INPUT terminal Y HDMI INPUT4 PB INPUT1 PR (COMPONENT) AUDIO (L) ANALOG RGB INPUT5 AUDIO (R) (PC-IN) S-VIDEO AUDIO VID
Part Names of the Remote Control POWER (P. 17) Switches the Liquid Crystal Television power on or standby. Channel Select (P. 19) Sets the channel. CH ( )/( ) (P. 19) Selects a channel. INPUT (P. 18) MTS (P. 18) Switches the input source between Selects audio settings. INPUT1, INPUT2, INPUT3, INPUT4, MUTE (P. 18) INPUT5 (PC) and TV mode. Mutes the sound. FLASHBACK (P. 19) AUDIO ONLY (P. 34) Returns to the previous channel. Outputs audio without screen image. DISPLAY (P. 17) Displays the rece
Connecting with External Devices You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of the LCD TV set. When connecting an external device, turn off the power of the LCD TV set ﬁrst to prevent any possible damage. INPUT1 terminal (COMPONENT) DVD player Digital TV tuner INPUT4 terminal (HDMI) * If your external device has a INPUT4 component terminal, COMPONENT DVD player connection is recommended HDMI cable HDMI (you can view
EZ SETUP (With AUTO CLOCK Setting) 4 Press ENTER to access START EZ SETUP mode. EZ SETUP during the First Power On Press '/" to select “YES”, and press ENTER. ■ When you turn on the LCD TV set for the ﬁrst time, it will A automatically memorize the broadcasting channels and • If you want to stop the EZ SETUP process once it has clock. started, press MENU and it will be canceled. If you want to Please perform the following instructions before you press set up again, please refer to CH SETUP
Setting the CLOCK A AUTO CLOCK Setting • CLOCK: The AUTO CLOCK setting may take from several minutes to an There are two methods of setting the clock: AUTO CLOCK hour depending on the number of channels to receive and signal status. and MANUAL CLOCK. AUTO CLOCK uses EDS signals, • EDS CH < AUTO >: which are provided by some TV stations, to automatically If there are no channels with EDS signals or the antenna signal adjust the clock. MANUAL CLOCK sets the clock manually is weak, the AUT
Basic Operation Daylight Saving Time (DST) Adjustment Turning On and Off the Main Power The Daylight Saving-Time changes as shown below. Set the DST to “ON” to forward the clock by 1 hour. To rewind the POWER clock by 1 hour, set the DST to “OFF”. (Spring) On the ﬁrst Sunday in April DST starts. 1:00AM 2:00A M Advances 1 hour. 3:00AM 4:00A M (Autumn) On the last Sunday in October DST ﬁnishes. 1:00AM 2:00AM Rewinds 1 hour. 1:00AM 2:00A M TIME DISPLAY You can display the current time on the scre
Basic Operation (Continued) Switching the Input Modes (INPUT1/ Sound Volume INPUT2/INPUT3/INPUT4/INPUT5(PC)/TV) ■ To adjust the volume 1 Turn on the power of the connected video equipment. 2 Press INPUT to select the applicable input source. The screen changes in order of INPUT1, INPUT2, INPUT3, ● Press VOL ( ) to increase the sound volume. + INPUT4, INPUT5 (PC) and TV mode each time INPUT The bar indicator shifts right. is pressed. V O L U M E INPUT1 mode � � 5 0 I N P U T 1 7 2 0 P ● Pre
|1||Sharp AQUOS 09P09-MX-NM||Flat Panel Television||196|
|2||Sharp Aquos LC 10A3U||Flat Panel Television||57|
|3||Sharp AQUOS 10P06-MX-NM||Flat Panel Television||17|
|4||Sharp Aquos LC 13E1U||Flat Panel Television||22|
|5||Sharp AQUOS 9JDJ3BX0131A||Flat Panel Television||21|