Summary of the content on the page No. 1
OPERATION MANUAL MODE D’EMPLOI
LC-26DA5U/LC-32DA5U
MANUAL DE OPERACIÓN MANUAL DE OPERAÇÃO
-
LC 26DA5U
-
LC 32DA5U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA DE CRISTAL LIQUIDO
TELEVISOR DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D’EMPLOI
SHARP ELECTRONICS CORPORATION
MANUAL DE OPERACIÓN
Sharp Plaza, Mahwah, New Jersey 07430-2135
MANUAL DE OPERAÇÃO
SHARP CORPORATION
®
Products that have earned the ENERGY STAR are designed
to protect the environment through superior energy effic
Summary of the content on the page No. 2
LC-26DA5U LC-32DA5U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL • The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. • Menu items that are not selectable are grayed out. • The examples used throughout this manual are based on the LC-32DA5U model. IMPORTANT: Model No.: To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are
Summary of the content on the page No. 3
IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RE
Summary of the content on the page No. 4
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
Summary of the content on the page No. 5
IMPORTANT SAFETY INSTRUCTIONS • Water and Moisture — Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. • Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommen
Summary of the content on the page No. 6
IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of
Summary of the content on the page No. 7
QUICK REFERENCE STOP! To safely remove the AQUOS television from the box It’s best to use 2 people to remove the AQUOS television for stability. 1. Use the cardboard holders on either side of the AQUOS television to remove it from the box. 2. Remove the cardboard; however, keep the wrapping on the AQUOS television to protect it while moving. 3. Lift onto installation location as the diagram illustrates. Ventilation & Cleaning Tips Keep your AQUOS television in a well ventilated area and make sur
Summary of the content on the page No. 8
QUICK REFERENCE If the remote control fails to operate TV functions, replace the batteries in the remote control unit. 1 Open the battery cover. 2 Insert two “AAA” size batteries 3 Close the battery cover. (supplied with the product). • Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. • Do not mix batteries of di
Summary of the content on the page No. 9
Contents IMPORTANT INFORMATION ………………………1 Using external equipment ……………………… 25 Trademarks ……………………………………………2 Displaying an external equipment image 25 DEAR SHARP CUSTOMER …………………………3 Connecting a DVD player or IMPORTANT SAFETY INSTRUCTIONS ……………3 Digital TV STB ………………………… 26 QUICK REFERENCE …………………………………6 Connecting a VCR, game console or Contents ………………………………………………8 camcorder …………………………… 27 Supplied accessories ………………………………8 Connecting HDMI equipment …………… 27 Part names ……………………………………………9 Disp
Summary of the content on the page No. 10
Part names TV CHANNEL buttons (CHs/r) INPUT VOLUME buttons (VOLl/k ) button POWER (On/Off) button OPC sensor Remote control sensor OPC indicator POWER indicator *OPC: Optical Picture Control (See page 21.) 9 LC-26/32DA5U(E)-01-12 9 05.7.15, 8:15 AM
Summary of the content on the page No. 11
Part names TV MONITOR OUTPUT terminals AC INPUT terminal INPUT 3 terminals INPUT 2 terminals INPUT 1 terminals Antenna input terminal SYSTEM RESET** RS-232C RESET* terminal INPUT 4 terminals * Press RESET if the TV cannot return to its original state after performing various operations. • AV MODE resets to DYNAMIC (Fixed) • TV channel returns to initial channel setting (Air: 2ch, Cable:1 or 2ch) • Audio setting initializes • Surround resets to Off • Image position initializes ** Press SYSTEM RES
Summary of the content on the page No. 12
Part names 1TV POWER: Switch the TV power on or standby. (See Remote control unit page 13.) 2 DISPLAY: Display the channel information. 114 3 SOURCE POWER: Turns the power of the external equipment on and off. 4 External equipment operational buttons: Operate the external equipment. 50 – 9: Set the channel. (See page 15.) 2 3 15 6 • (DOT) (See page 43.) 7 INPUT: Select a TV input source. (TV, INPUT 1, INPUT 2, INPUT 3, INPUT 4) (See pages 25 and 29.) 4 8VOL k k k k k/l l l l l: Set the volume.
Summary of the content on the page No. 13
Preparation Using the remote control unit Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. Cautions regarding remote control unit • Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity. • Do not install or place the remote control unit under direct sunligh
Summary of the content on the page No. 14
Watching TV Simple operations for watching a TV program Turning on the power Press POWER on the TV, or TV POWER on the remote control. • POWER indicator (Green): The TV is on. (After a few seconds, a window appears with sound.) POWER POWER indicator NOTE • The initial setup starts when the TV powers on for the first time. If the TV has been turned on before, the initial setup will not be invoked. See page 19 to try EZ setup from the Setup menu. Turning off the power TV POWER (On/Standby) Pres
Summary of the content on the page No. 15
Watching TV Initial setup When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you live. Perform the following steps before you press TV POWER on the remote control unit. 1. Insert the batteries into the remote control unit. (See page 7.) 2. Connect the antenna cable to the TV. (See page 6.) 3. Plug in the AC cord to the AC outlet. (See page 6.) Language setting Select from among 3 languages: English, French and Spanish. 1 Press a/b to sel
Summary of the content on the page No. 16
Watching TV Using 0 – 9 on the remote control unit Simple button operations for Select the channels directly by pressing buttons 0 to changing channels 9. • The TV allows you to select up to 125 channels (1 You can change channels in several ways. to 125). To select a channel, enter a 2 or 3-digit number. a To select a 1 or 2-digit channel number (e.g., Channel 5): Complete the following steps within 3 seconds. 1 Press the 0 button. • Complete the step 2 within 3 seconds after the step 1. Pres
Summary of the content on the page No. 17
Watching TV Using MUTE on the remote control unit Simple button operations for changing volume/sound Mutes the current sound output. Changing the volume You can change the volume on the TV or on the remote control unit. 1 Press MUTE. VOL l/k •“M” has been displayed on the screen for 30 minutes, and the sound is silenced. 20 Mute k k l l Using VOL k k k/l l l • To increase the volume, press VOL k k k k k. • To decrease the volume, press VOL l l l l l. NOTE • Within 30 minutes of pressing MU
Summary of the content on the page No. 18
Watching TV NOTE Setting MTS/SAP stereo mode • MTS only operates while in TV mode. The TV has a feature that allows reception of sound other than the main audio for the program. This feature You can change MTS as is called Multi-channel Television Sound (MTS). The shown below to match TV with MTS can receive mono sound, stereo sound the television broadcast and Secondary Audio Programs (SAP). The SAP signal. feature allows a TV station to broadcast other information, which could be audio in anot
Summary of the content on the page No. 19
Basic adjustment settings Menu items List of menu items to help you with operations Picture Setup OPC ................................................ Page 21 EZ Setup ........................................ Page 19 Backlight ........................................ Page 21 CH Setup .................................Pages 19-20 Contrast ......................................... Page 21 Input Label ..................................... Page 30 Brightness ..................................... Page
Summary of the content on the page No. 20
Basic adjustment settings EZ setup Channel setup If initial setup does not memorize all the channels in You can run EZ Setup again, even after setting up the preset channels. your region, follow the instructions below to manually memorize the channels. Language setting Antenna setting Select from among 3 languages: English, French and Spanish. 1 Press MENU and the MENU screen displays. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 2 Press c/d to select “Setup”. 3 Pres
