Our goal is to provide you with a quick access to the content of the user manual for Sharp Flat Panel Television LB-T422U. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Sharp Flat Panel Television LB-T422U.
If looking through the Sharp Flat Panel Television LB-T422U user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Sharp Flat Panel Television LB-T422U but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Sharp Flat Panel Television LB-T422U. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
LED HDTV LCD COMMERCIAL DISPLAY
IMPORTANT : Please read this operation manual before starting operating the equipment.
E E EN N NG G GL L LIIIS S SH H H
LB-T462U LB-T422U LED HDTV LCD COMMERCIAL DISPLAY ENGLISH OPERATION MANUAL IMPORTANT: Model No.: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The Serial No.: numbers are located at the rear of the TV. IMPORTANT INFORMATION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO WARNING: NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning ﬂash with arrow-head symbol, within an equilateral triangle, CAUTION is intended to a
IMPORTANT INFORMATION CAUTION: This product satisﬁes FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LB-T462U/LB-T422U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Ins
IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against ANTENNA voltage surges and built-up static charges. LEAD IN WIRE Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the GROUND mast and supporting stru
IMPORTANT SAFETY INSTRUCTIONS Caring for the front panel • Turn off the main power and unplug the AC cord from the wall outlet before handling. • Gently wipe the surface of the front panel with a soft cloth (cotton, ﬂ annel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel. • Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
Contents IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . 1-2 Enjoying Photo/Music/Video Playback DEAR SHARP CUSTOMER . . . . . . . . . . . . . . . . . . . . . . . 3 Connecting a USB Memory Device/ USB Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . 3-5 Connecting a DLNA Network Server. . . . . . . . . . . 31 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Select the Files to Play Ba
Supplied Accessories Make sure the following accessories are provided with the product. Remote control unit “AAA” size battery Stand unit Operation manual Connection guide (g1) Page 8 (g2) Page 9 ( 1) Page 7 (g1) (g1) g • Always use the AC cord supplied with the TV. • The illustrations above are for explanation purposes and may vary slightly from the actual accessories. QUICK REFERENCE Attaching/Detaching the Stand • Before attaching (or detaching) the stand, unplug the AC cord. • Before perform
QUICK REFERENCE QUICK INSTALLATION TIPS Using the Remote Control Unit 1 Attach your antenna to the back of the television. Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the (See page 9.) remote control unit and the remote control sensor may 2 Connect the AC plug for the television into the AC prevent proper operation. outlet. AC outlet • Place the TV close to the AC outlet, and keep the power plug within reach. 17´ (5 m) 30º
Preparation Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use commercially available cables. Connecting Antenna Cable • Connect the antenna cable to the TV using one of the methods in the illustratio
Part Names TV (Front) OPC * Remote control sensor POWER indicator * OPC: Optical Picture Control （See page 24.) TV (Rear/Side) *2 *1 Channel buttons / (CH ) RS-232C IOIOI Volume terminal buttons / kl (VOL ) MENU button INPUT button HEAD PHONE POWER terminal button INPUT 1 *1 terminal (HDMI) DIGITAL AUDIO OUTPUT terminal INPUT 2 terminal (HDMI) INPUT 5 Antenna/Cable in PC IN ANT./CABLE USB PC IN DIGITAL terminal AUDIO OUTPUT terminal INPUT 3 INPUT 3 terminal(HDMI) AUDIO PC/HDMI AUDIO PC/HDMI
Part Names 1. INPUT: Select a TV input source. (See page 17.) Remote Control Unit 2. 0–9: Set the channel. 3. ENT: Jumps to a channel after selecting with the 0-9 buttons. 4. FLASHBACK: Press to switch to the previously tuned POWER channel or external input mode. Press again to switch INPUT 1 16 back to the currently tuned channel or external input mode. (See page 19.) 1 2 3 5. AUDIO: Display the MTS/SAP setting menu. (See page 18.) 4 5 6 2
Introduction to Connections Experiencing HD Images An HDTV without an HD source is just an ordinary TV. To enjoy HD images on the TV, you should get HD programming from the following: • Over-the-air broadcasting via HD quality antenna • HD cable/satellite subscription • HD compatible external equipment • For information on updating to HD programming, ask your cable/satellite service provider. Types of Connection Image quality differs depending on the terminal used. To enjoy clearer images, check
Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 12 and 19.) For connecting the TV to external equipment, use commercially available cables. CAUTION • To protect equipment, always turn off the TV before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making c
Connecting to External Equipment When using Component cable (INPUT 5): • Blu-ray disc player • DVD player • HD cable/satellite set-top box INPUT 5 Y (Yellow) PB (Blue) Component video cable PR (Red) AUDIO-L (White) Audio cable AUDIO-R (Red) COMPONENT OUT • To enjoy 1080p display capability, connect your external equipment using an HDMI-certiﬁ ed cable or a component cable and set the equipment to 1080p output. • See page 13 for connecting a Blu-ray disc player, DVD player or an HD cable/satel
Connecting to External Equipment Connecting an Audio Ampliﬁ er When using Digital coaxial cable: It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 26 for details.) PCM audio outputs from the terminal. Digital coaxial cable DIGITAL AUDIO INPUT DIGITAL AUDIO OUTPUT • Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI connection. In this case, set the audio formats of the connected equipment to PCM, 32/4
Connecting to External Equipment Connecting a PC Refer to page 47 for a list of PC signals compatible with the TV. When using HDMI cable (INPUT 1, 2, 3 or 4): HDMI-certiﬁed cable INPUT 3 INPUT 4 HDMI OUT • Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certiﬁed cable to the INPUT 1, 2, 3 or 4 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO PC/HDMI terminal and set "Audio Select" to "HDMI+Analog". (See page 27.) • The HD
Watching TV Select where the Display will be placed. Turning On/Off the Power the picture will be optimized for that location. POWER (On/Standby) Home Store POWER INPUT Home: “Power Saving” is set to "On", and AV MODE is set 1 2 3 to "STANDARD". “Home” is qualiﬁed for ENEGRY 4 5 6 STAR . This mode is qualiﬁed for ENERGY STAR POWER Press POWER on the TV or on the remote control unit OK to turn the power on. Store: “Power Saving” is set to "Off" and AV MODE is set to "DYNAMI
Direct Button Operation Completed MUTE After setting complete.the screen will show EZ 5 Mutes the current sound output. setup Completed . . Press MUTE • " " will be displayed on the screen , and the sound is silenced. EZ Setup Completed • Mute can be canceled by pressing VOLk/l or MUTE. Sleep Timer • If no channel is found, conﬁ rm the type of connection Allows you to set a time when the TV automatically made with your TV and try "EZ Setup" again. switches to standby. (See page 28.) Pres
Direct Button Operation In the Closed Caption system, there can be more than FLASHBACK one caption service provided. Each is identiﬁed by its Press FLASHBACK to switch to the previously tuned own number. The “CC1” and “CC2” services display channel. subtitles of TV programs superimposed over the • Press FLASHBACK again to switch back to the currently program's picture. tuned channel. In the Closed Caption system, the “Text1” or “Text2” services display text that is unrelated to the progr
|1||Sharp AQUOS 09P09-MX-NM||Flat Panel Television||282|
|2||Sharp Aquos LC 10A3U||Flat Panel Television||72|
|3||Sharp AQUOS 10P06-MX-NM||Flat Panel Television||18|
|4||Sharp Aquos LC 13E1U||Flat Panel Television||33|
|5||Sharp AQUOS 9JDJ3BX0131A||Flat Panel Television||22|