Summary of the content on the page No. 1
19 /20 LCD Television / Monitor
Owner s Manual
SLTV-1963A
SLTV-2063A
Summary of the content on the page No. 2
The lighting flash with arrow head within a triangle is intended to tell the user that parts WARNING inside the product are a risk of electric shock to persons. RISK OF ELECTRIC SHOCK DO NOT OPEN The exclamation point within a triangle is WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT intended to tell the user that important REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. operating and servicing instructions are in REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Summary of the content on the page No. 3
ELECTRIC SERVICE EQUIPMENT 11.POLARIZATION - This unit is equipped with a 19.DAMAGE REQUIRING SERVICE - Unplug this polarized alternating current line plug (a plug unit from the wall outlet and refer servicing to having one blade wider than the other). This plug qualified service personnel under the following will fit into the power outlet only one way. This is conditions: a safety feature. If you are unable to insert the A. When the power-supply cord or plug is plug ful
Summary of the content on the page No. 4
TABLE OF CONTENTS Table of Contents Congratulations 4 Function Menu Operation Specifications 4 12-16 PICTURE 5 12 Installation V-CHIP 12 Television Location 5 Setup menu 13 Remote Control Battery Installation 5 DTV Setting menu 14 Power Source 5 Tune menu 14 Combination VHF/UHF Antenna 6 PC Setup menu 15 Optional Equipment Connections 7 Special Message 16 Rear Panel Connectors 7 Service Tips 17 Front Control Panel 7 18-19 Limited Warranty Remote Control Operation 8-11 TV mode 8-11 3
Summary of the content on the page No. 5
¼ò ½é ¼ò ½é CONGRATULATIONS Congratulations Your new TV Monitor/Receiver features a solid state chassis that is designed to give you many years of enjoyment. It was thoroughly tested and tuned at the factory for best performance. 19 19 Color (Diagonal) 408.24 x 255.15mm (H x V) 1440 x 900 20 Color (Diagonal) 20 433.61 x 249.41 mm (H x V) 1366 x 768 600:1 160 140 16:9 NTSC/ATSC ; ATSC (For ATV Only) < 3W DTV Build-in yes 21-7/16 7-1/16 16-1/4 24-1/4 9-7/16 18-1/2 20-1/4
Summary of the content on the page No. 6
INSTALLATION Installation Procedure 1. Turn the remote control face down. Remove battery Television Location cover by pressing down on the marking on the cover and sliding it off in the direction indicated. Follow these recommendations before deciding the 2. Install batteries matching(+) and(-) polarity signs. location of your television. 3. Replace the battery cover by sliding in reverse until Avoid excessive sunlight or bright lights, the lock snaps. inclu
Summary of the content on the page No. 7
INSTALLATION For Subscribers to Scrambled Cable TV service Combination VHF/UHF Antenna If you subscribe to a cable service which requires the Combination VHF/UHF Antenna (Single 75 ohm use of a converter/descrambler box, connect the cable or 300 ohm twin-lead wire) incoming cable to the converter/descrambler box and Connect the 75 ohm cable from a combination connect the output of the box to the antenna jack on VHF/UHF antenna to the antenna jack. the back of the television. Follow the c
Summary of the content on the page No. 8
BASIC CONTROLS AND CONNECTIONS Optional Equipment Connections Front Control Panel The front control panel can be used to access Side Panel Connectors menus and switch video mode when the remote control AUDIO IN 1 AUDIO IN 1 COMPO COMPONENT NENT AUDIO IN 2 AUDIO IN 2 AUDIO OUT AUDIO OUT is not available. HEADPHONE HEADPHONE ANT IN ANT IN VIDEO VIDEO S-VIDEO S-VIDEO PC IN PC IN R R L L Y Y Pb Pb Pr Pr R R L L R R L L 1 2 3 4 5 6 7 8 9 10 11 12 1. Antenna or cable In 2. Video / S-Video Audio Ri
Summary of the content on the page No. 9
- /- - »ù±¾²Ù×÷ »ù±¾²Ù×÷ REMOTE CONTROL OPERATION Remote Control Operation -/ -/-- -- POWER -/-- Select channel digits. Turn on / off. 2 3 4 5 6 MUTE Q Q.V .VIE IEW W 7 8 9 Q.VIEW Q. 0 Mute the sound. VIEW Back to previous viewed channel. TV/AV CC DTV CH.+ S SLE LEE EP P DTV VOL.- MENU VOL.+ Enter DTV Setting menu Set the sleep timer. CH.- P.M P.M P.M. DTV I/II Select desired picture mode. I/II AUDIO Display information of current input. I/II Select sound mode. MENU CC Display menu function.
Summary of the content on the page No. 10
- /- - REMOTE CONTROL OPERATION TV MODE: 1.POWER Button( ) Press this button to turn the TV on or off. 2. Mute Button( ) Press once to mute the sound, press again to recover previously set sound level. This button will not work if CC display is switched on. 2 1 DTV:Press this button to enter DTV setting menu. 3. Picture Mode Button( P.M ) 2 3 4 5 6 7 Press this button to select desired picture mode. Four 7 8 9 picture modes are available including Custom, Rich, Standard and
Summary of the content on the page No. 11
- /- - REMOTE CONTROL OPERATION To quit this menu please press CC button again or MENU button or it will disappear automatically after 10-second display. 6.TV/AV Button( TV/AV ) 2 1 Press this button to select the desired input source among TV, DTV,Video, S-Video, Componentand 2 3 PC. You can press this button to switch among all available inputs in this menu continuously until desired 4 5 6 input is displayed. Selected input will be switched to 7 automatically after two seconds. 7 8 9
Summary of the content on the page No. 12
- /- - REMOTE CONTROL OPERATION 11.Recall Button( ) 2 1 Press this button to display information on current input. 2 3 12.Menu Button Press this button to enter Picture menu or quit from 4 5 6 current menu. 7 7 8 9 13.Channel Up(CH.+) / Down( CH.-) Button Q. 0 8 9 Press these buttons to select channels in ascending or VIEW descending order for both ATV and DTV or select available items in a menu. 5 TV/AV CC 6 CH.+ 14.Volume Up(VOL.+) / Down(VOL.-) Button 13 Press these buttons to inc
Summary of the content on the page No. 13
Function Menu Operation Function Menu Operation Press CH- button to enter V-Chip menu if there is CH.+ no password or enter Password Check menu VOL.- MENU VOL.+ CH.- After input password which consists of only digitals and spaces, press VOL+ button to confirm. If the password is correct, return to V-Chip menu. Otherwise Check Password menu Press MENU button to display Picture menu. You can keep displayed and allow you to re-enter the browse Picture, V-Chip, Setup, Tune and PC Setup passw
Summary of the content on the page No. 14
Function Menu Operation Function Menu Operation MPAA Rating Press VOL+ button to enter MPAA Rating menu Input your password, press VOL+ to confirm. If the password is correct, image and volume will recover. Otherwise image and volume will still be blocked and above dialog will not disappear. Setup menu In this menu you can set MPAA rating. Press CH+/CH- buttons to select desired rating, block or unblock the selected rating by pressing CH+/CH- buttons. Canada English Rating Press VOL+ butt
Summary of the content on the page No. 15
Function Menu Operation Function Menu Operation DTV Setting menu Factory Reset Press VOL+ button to reset DTV settings with default value. Note: It is strongly recommended that you should scan DTV programs right after reset DTV settings. Otherwise you can not watch all DTV programs. Aspect Only DTV display aspect ratio can be selected between model and mode2 using this item. Please DTV related functions can be reached in this menu. choose preferred one. Antenna level Press VOL+ button to ent
Summary of the content on the page No. 16
Function Menu Operation Function Menu Operation TV Source PC Setup menu Press VOL+ button to enter TV Source menu. You can modify settings on PC input in this menu In TV Source menu, you can switch TV source Press CH+/CH- buttons to select available items among Antenna, Cable(STD), Cable(IRC) and in this menu and perform corresponding operation. Cable(HRC) by pressing VOL+ button. Note: Please make it sure that proper TV Source is You can enter this menu only in PC input and selected befo
Summary of the content on the page No. 17
Function Menu Operation Auto Configuration Function Menu Operation Special Message: No Signal This message indicates that PC automatic configuration is in process. After finish PC image adjustment, this message will disappear. This message indicates there is no signal for PC input. Image Shrink If there is no signal for PC input, black screen will be displayed and above dialog mentions you to plug PC signal. For all inputs other than PC input, blue screen will be displayed if there is no
Summary of the content on the page No. 18
»ù±¾²Ù×÷ »ù±¾²Ù×÷ Service Tips Service Tips Please make these simple checks as indicated ( ) on the chart for the respective symptoms and their possible remedies. Symptoms No picture, no sound Poor sound, picture OK Poor picture, sound OK Weak picture Blurred picture Double image Lines in picture Distorted picture Weak reception on some channels Horizontal bars Picture rolls vertically Poor colour No colour Misoperation of Remote control Remote control unit no operation On Screen Display C
Summary of the content on the page No. 19
18
Summary of the content on the page No. 20
Sk Skyw ywor orth th El Elec ectro troni nics I cs Inc nc. . 13 1312 12 Jo John hn R Ree eed C d Cou ourt, rt, Ci City o ty of In f Indu dustr stry, CA y, CA 91 9174 745 5 Ph Phon one: 6 e: 626 26-33 -336-3 6-369 698 8 Fax Fax: 62 : 626-3 6-336 36-32 -3238 38 Em Email ail: se : serv rvice ice@ @sk skyw ywor orth th.co .com m.h .hk k Ht Http tp: w : www ww.sk .skyw ywor ort
