Our goal is to provide you with a quick access to the content of the user manual for Toshiba 32C110U. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Toshiba 32C110U.
If looking through the Toshiba 32C110U user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Toshiba 32C110U but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Toshiba 32C110U. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Integrated High Deﬁnition
The model number and serial number are on the back
For an overview of steps for setting up your new TV, see page 10.
of your TV. Record these numbers in the spaces below.
Note: To display a High Deﬁnition picture, the TV must be receiving
Refer to these numbers whenever you communicate
a High Deﬁnition signal (such as an over-the-air High Deﬁnition
with your To
Dear Customer, Thank you for purchasing this Toshiba LCD TV. This CHILD SAFETY: manual will help you use the many exciting features It Makes A Difference How and Where You Use Your Flat of your new LCD TV. Before operating your LCD TV, Panel Display please read this manual completely, and keep it nearby for future reference. Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: Safety Precautions The Issue WARNING: TO REDUCE THE RISK OF FIR
NEVER allow your body to come in contact with any • Important Safety Instructions broken glass or liquid from the damaged television. The LCD panel inside the TV contains glass and a toxic 1) Read these instructions. liquid. If the liquid comes in contact with your mouth 2) Keep these instructions. or eyes, or your skin is cut by broken glass, rinse the 3) Heed all warnings. affected area thoroughly with water and consult your 4) Follow all instructions. doctor. ALWAYS contact a s
24) To avoid damage to this product, never place or store 33) DANGER: RISK OF SERIOUS the TV in direct sunlight; hot, humid areas; or areas PERSONAL INJURY OR DEATH! subject to excessive dust or vibration. Use extreme care to make sure you are never in • 25) Always place the TV on the floor or a sturdy, level, a position where your body (or any item you are stable surface that can support the weight of the unit. in contact with, such as a ladder or screwdriver) To secure the TV, use a
40) During normal use, the TV may make occasional Choosing a location for your LCD TV snapping or popping sounds. This is normal, To Display your LCD TV on the included especially when the unit is being turned on or off. Pedestal Stand: If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Observe the following safety precautions: Authorized Service Provider. 1) Read and Follow the pedestal assembly instructions 41) included with the pedestal. DANGER
40” TV TV Size Hole Pattern(HxV) Screw Size VESA Mounting Pattern 32” 200x200 mm M6 40” 200x200 mm M6 46” 400x200 mm M8 55” 400x200 mm M8 (unit in mm) Removing the Pedestal Stand 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the Hook surface. Four screws Sturdy strap Note: Extreme care should always be used (as short as possible) when removing the pedestal stand to avoid damage to
FCC Declaration of Conformity Important notes about your Compliance Statement (Part 15): LCD TV Toshiba 32C110U, 40E210U, 46G310U and 55G310U The following symptoms are technical limitations of LCD Display technology and are not an Television models indication of malfunction; therefore, Toshiba is comply with Part 15 of the FCC rules. not responsible for perceived issues resulting from Operation is subject to the following two conditions: these symptoms. (1) This device may not cau
Contents Muting the sound ............................................................ 37 Important Safety Instructions ............................ 3 Using the digital audio selector ...................................... 37 Installation, Care, and Service .......................... 3 Selecting stereo/SAP broadcasts .................................... 37 Chapter 1: Introduction ................................... 9 Adjusting the audio quality ....................................
Chapter 1: Introduction Features of your new TV The following are just a few of the many exciting features of your new T oshiba widescreen, integrated HD, LCDTV : Integrated digital tuning (8VSB ATSC and • QAM) eliminates the need for a separate digital converter set-top box (in most cases). 1366 x 768 output resolution (C110U). • 1920 x 1080 output resolution (E210U, G310U). • ® HDMI digital, high-definition multimedia • interfaces 1080p input support ( page 16). ® One set of Col
10 Program channels into the TV’ s channel memory Overview of steps for installing, ( page 24). setting up, and using your new TV 11 For details on using the TV’ s features, see Chapters 6 and 7. Follow these steps to set up your TV and begin using 12 For help, refer to Chapter T 8: roubleshooting. its many exciting features. 13 For technical specifications and warranty information, see Chapter 9. Carefully read the important safety, installation, 1 care, and service information
Chapter 1: Introduction TV front and side panel controls and connections Models C110U, E210U, and G310U are used in this manual for illustration purposes. Left side panel TV front 3 TV top 7 4 8 5 9 6 10 11 32C110U/40E210U 2 1 Control panel 46G310U/ 55G310U Control panel 8無 VOLUME tu —When no menu is on-screen. 1無 Green LED These buttons adjust the volume level. Power LED (Green) = Power indicator — Repeatedly press to change the video 2無 Remote sensor (embedded) — Point the remote
Chapter 1: Introduction TV back panel connections For an explanation of cable types and connections, see pages 13–19. 1 TV back 2 1 3 4 Power Cord 7 6 5 1無 PC IN — For use when connecting a personal 6無 VIDEO IN — Standard (composite) video and computer. standard audio inputs for connecting devices with composite video. ® — High-Definition Multimedia 2無 HDMI IN Note: Standard (composite) video cable Interface input re ceives digital audio and carry only video information; separate uncompr
Chapter 2: Connecting your TV Optical audio cable Overview of cable types Cables can be purchased from most stores that sell audio/ Optical audio cable is for connecting receivers with video devices. Before purchasing any cables, be sure of Dolby Digital or PCM (pulse-code modulation) optical connector types required by your devices and the length audio input to the TV’ s DIGITAL AUDIO OUT terminal of each cable. ( page 18). Coaxial (F-type) cable Analog RGB (
Chapter 2: Connecting your TV Connecting a VCR, Antenna, Cable TV, or Camcorder From Cable TV From Cable TV or antenna Camcorder Cable box AUDIO VIDEO OUT L IN CH 3 CH 4 OUT TV back panel R Stereo VCR VIDEO AUDIO L R IN from IN CH 3 ANT CH 4 OUT OUT to R TV L 1 You will need: To view the VCR: Turn ON the VCR. Select the VIDEO video input Coaxial cables • source on the TV .* Standard A/V cables • To view the camcorder video: If you have a mono VCR, connect L/MONO − on the TV t
Chapter 2: Connecting your TV ® Connecting a DVD player with ColorStream (component video), a VCR, and a satellite receiver From antenna TV back panel Stereo VCR VIDEO AUDIO L R IN IN from ANT CH 3 CH 4 OUT OUT to TV R L From satellite dish 1 AUDIO OUT L Y PB PR VIDEO R Satellite COMPONENT VIDEO S-VIDEO IN OUT OUT Satellite receiver with component video or DVD player with component video You will need: To view antenna or Cable channels: Coaxial cables Select theANT/CABLE video input sou
Chapter 2: Connecting your TV To connect a DVI device, you will need: ® Connecting an HDMI or DVI One HDMI-to-DVI adapter cable • device to the HDMI input For proper operation, the length of an HDMI- − to-DVI adapter cable should not exceed 9.8 ft The HDMI input on your TV receives digital audio (3m). The recommended length is 6.6 ft (2m). and uncompressed digital video from an HDMI One 3.5mm stereo to RCA Y-cable • source device, or uncompressed digital video from a An HDMI-to-DVI
Chapter 2: Connecting your TV ® REGZA-LINK connection You can control the basic functions of connected audio/video devices using TV’ the s remote control if you ® connect a REGZA-LINK compatible audio receiver or playback device. For an explanation of setup and operations, see page 47. TV back panel Playback device Audio receiver ® (REGZA-LINK DVD player, etc.) Playback device ® (REGZA-LINK DVD player, etc.) To connect an Audio Receiver and Playback Before controlling the device(s): Device
Chapter 2: Connecting your TV Note: Connecting a digital audio system Some audio systems may not be compatible • with Dolby Digital bitstream signals. Older The TV’s DIGITAL AUDIO OUT terminal outputs a audio systems that are not compatible with ® * Dolby Digital or 2-channel down-mixed standard optical out signals may not work PCM (Pulse-Code Modulation) signal for use with properly, creating a high noise level that ® an external Dolby Digital decoder or other external may d
Chapter 2: Connecting your TV Note: The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p The PC audio input terminals on the TV are shared • (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal with the HDMI-1 analog audio input terminals ( formats. For detailed signal specifications, see page 56. page 43). Some PC models cannot be connected to this TV. Note: • An adapter is not needed for computers with a The edges of the images may be hidd
Chapter 3: Using the remote control Installing the remote control Remote control effective range batteries For optimum performance, aim the remote control directly at the TV and make sure there is no Remove the battery cover from the back of the 1無 obstruction between the remote control and TV the. remote control. Squeeze tab Point remote control toward and lift cover. remote sensor on front of TV. Install two “AAA” size batteries, making sure to 2無 match the + and – signs on
|1||Toshiba 14DL74||Flat Panel Television||274|
|2||Toshiba 15DL75||Flat Panel Television||58|
|3||Toshiba 15DLV16||Flat Panel Television||25|
|4||Toshiba 15CV100U||Flat Panel Television||32|
|5||Toshiba 15DL72||Flat Panel Television||14|