Our goal is to provide you with a quick access to the content of the user manual for Toshiba DL66. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Toshiba DL66.
If looking through the Toshiba DL66 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Toshiba DL66 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Toshiba DL66. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Remember… For television operation queries, please ring the helpline… ? gg Contents SETTING UP Safety precautions – Some do’s and don’ts for you to be aware of 3 Installation and important information 4 The remote control – an at-a-glance guide 5 Connecting external equipment – a guide to connecting external equipment to the back of the television 6 Connecting a computer – connecting a computer to the back of the television 7 Controls and input connections – switching on the television, standby
gg Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased. DO NOT REMOVE ANY FIXED COVERS AS THIS Air Circulation WILL EXPOSE DANGERO
gg Installation and important information Where to install Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight Sturdy tie (as short as possible) falling on the screen. Place on a sturdy platform, the mounting surface should be flat and steady. It should then be secured to the wall with a Clip sturdy tie using the clip on the back of the stand, or secured to the platfor
gg The remote control UP Simple at-a-glance reference of your remote control. To mute the sound For On/Standby mode Number buttons To select input from external sources To return to the previous programme Selectable picture preferences Widescreen viewing To exit Menus On-screen Menus Navigation Ring: Use P and P to change programme f e positions and text pages Use j – and j + to alter the volume When using menus press up, down, left and right to move the cursor on the screen. OK to confirm you
☛ Input 3 (side) will take priority over EXT3 (back) if both connections are used at the same time. gg Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. INPUT 3 (EXT3) GREEN LED – On timer RED LED – Power on Standby Switching on Using the contro
gg Tuning the television using Quick Setup, sorting programme positions Before switching on the television put your decoder and media recorder to Standby if they are connected. To set up the television use the buttons on the remote control as detailed on page 5. Connect the television to the mains power. The With the list of stations now showing use up or 6 1 down to highlight the station you want to move Quick Setup screen will appear. and press right. Quick Setup The selected station will
Different Channel numbers may be displayed gg Manual tune The television can be tuned-in manually using Manual tuning. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System. Use left and right to move across the screen and select any of these Manual Tune options. Programme Programme System Colour Channel Search Manual fine Station system skip tuning Programme: The number to be pressed on the remote control. Sys
gg Manual tune continued, Programme skip When your media recorder signal is found, press 8 Programme skip left to move along to Station. With up, down, left and right put in the required characters, e.g. VCR. To prevent certain programmes from being viewed, the programme position can be skipped. The remote control must be removed as the channels will still be available using Manual tuning the number buttons. Programmes can then be watched as Station normal using the controls on the television,
gg Auto tune, general controls, sound controls Using Auto tuning Selecting programme positions To set up the television using Auto tuning, press To select a programme position use the numbered 1 buttons on the remote control. MENU and use left or right to select the SET UP menu. Programme positions can also be selected using P and f P . e To revert to the previous programme position press . ^^ SET UP 1/2 To display on-screen information i.e. programme position, Langua
gg Widescreen viewing continued Use this setting when watching a 14:9 14:9 broadcast. Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of WIDE widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. Use this setting to view a true 4:3 4:3 broadcast. 42 MODEL ONLY Use this setting when watching a 1080i source, it will display the image EXACT SCAN as transmitted without
gg Picture controls Picture position Back light The picture position may be adjusted to suit personal Adjusting the Back light can improve the clarity of the preference and can be particularly useful for screen when viewing. external inputs. In the PICTURE menu press down to select 1 In the SET UP menu press down until Picture settings, then press OK. 1 Picture position is highlighted. PICTURE SET UP 1/2 Picture settings OK Language English 3D Colour management Off Count
gg Picture controls continued Picture preferences MPEG NR – Noise Reduction This television offers the choice of personalising the picture When watching a DVD the compression may cause some style. Press m to view the different styles available: words or picture elements to become distorted or pixelated. Using the MPEG NR feature reduces this effect by Picture mode-1 to 3 are preset options and smoothing out the edges. Picture mode-M stores your own settings: Select MPEG NR from the Picture s
gg Picture controls continued Base colour adjustment Colour temperature The Base colour adjustment feature allows the Colour Temperature increases the ‘warmth’ or ‘coolness’ adjustment of individual colours to suit personal of a picture by increasing the red or blue tint. preference. This can be useful when using an external source. In the Picture settings menu press down until 1 Colour Temperature is highlighted. In the PICTURE menu press down to select 1 Base colour adjustment, then press
gg Picture controls continued Cinema mode Blue screen If there are lines or jagged edges in the film or programme When Blue screen is selected the screen will turn blue and being viewed, selecting Cinema mode can help correct the sound will be muted when no signal is received. this by smoothing out the picture. In the FUNCTION menu press down to highlight 1 In the PICTURE menu press down to select Blue screen. 1 Cinema mode. FUNCTION PICTURE Teletext Auto. Picture settings
gg Panel lock, time display, stereo/bilingual transmissions, the timer Panel lock The Timer Panel lock disables the buttons on the television. All The television can be set to turn itself On or Off after a buttons on the remote control can still be used. certain time. From the FUNCTION menu select Panel lock Press MENU and left or right to select the TIMER 1 1 and choose On or Off usingleft or right. menu. FUNCTION TIMER Teletext Auto. Sleep timer 01:30
|1||Toshiba 14DL74||Flat Panel Television||274|
|2||Toshiba 15DL75||Flat Panel Television||58|
|3||Toshiba 15DLV16||Flat Panel Television||25|
|4||Toshiba 15CV100U||Flat Panel Television||32|
|5||Toshiba 15DL72||Flat Panel Television||14|