Our goal is to provide you with a quick access to the content of the user manual for Toshiba TheaterWide 40H80. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Toshiba TheaterWide 40H80.
If looking through the Toshiba TheaterWide 40H80 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Toshiba TheaterWide 40H80 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Toshiba TheaterWide 40H80. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
The model number and serial number are on the back
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
56H80 with your Toshiba dealer about this TV.
65H80 Serial number:
© 2000 TOSHIBA CORPORATION
All Rights Reserved
Index Appendix Using the TV’s Setting up Using the Connecting Introduction
Features your TV Remote Control your TV
Important Information Precautions WARNING Installing your TV TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO • Place the TV on the floor or on a sturdy platform. The NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. mounting surface should be flat and steady. If you install the TV on a soft floor, make sure that the floor is not damaged by the weight of the TV. • Model 40H80 may be used only with Toshiba stand shown on page 52. Use with other stands may result in instability causing possible injur
Using the LOCKS menu ............................................... 35 Introduction................................................................ 4 Entering the PIN code ............................................ 35 Welcome to Toshiba ......................................................... 4 Using the V-CHIP menu ............................................... 36 Exploring your new TV ................................................... 4 ENABLE BLOCKING ...................................
Introduction Please Note Welcome to Toshiba On some models, the SET UP Congratulations! You have purchased one of the finest projection TVs menu automatically appears on the market. The goal of this manual is to guide you through on-screen the first time the setting up and operating your Toshiba TV as quickly as possible. TV is turned on. This manual applies to models 40H80, 56H80, and 65H80. Before To change the menu settings, you start reading, check your model number on the back of the TV. se
Connecting your TV ANTENNA Coaxial Cable If you have not connected electronic equipment before, or you have been frustrated in the past, you may wish to read this section. (Cables are not supplied.) AUDIO Cables • A coaxial cable is the standard cable that comes in from your antenna or cable converter box. Coaxial cables use “F” VIDEO Cable connectors. • Audio and video cables are usually color-coded according to use: yellow for video and red and white for audio. The red audio cable S-VIDEO Cabl
Connecting a cable converter box Note: This connection allows you to watch basic and premium cable When you use a converter box with your TV, channels. the remote control will not operate some To use the TV’s features, select ANT-1. To view premium channels, features, such as programming your favorite select ANT-2, tune the TV to channel 3 or 4 (whichever channel is channels, labeling channels, and locking vacant in your area), and use the converter box to change channels. channels. You will nee
Note: Connecting a DVD player or satellite receiver For the highest possible picture quality from and a VCR a non-ColorStream DVD player/satellite This connection allows you to watch DVD/satellite, VCR, and TV receiver, you must use an S-video cable programs, and record one TV channel while watching another between the TV and DVD player/satellite channel. receiver. (If your DVD player or satellite receiver is ColorStream-compatible, see You will need: page 8). • one coaxial cable Do not connect
Note: Connecting a DVD player (with or without For the highest possible picture quality, you ColorStream™) and a VCR must use ColorStream video cables between This connection allows you to watch DVD, VCR, and TV programs, the TV and DVD player. You can connect the and record DVD and TV programs. You can record from one source ColorStream cables from the DVD player to either ColorStream jack on the TV (HD1 or while watching a program from another source. HD2). Your TV has ColorStream component vi
Note: Connecting a DTV receiver/set-top box For the highest possible picture quality, you (with or without ColorStream™) and a VCR must use ColorStream video cables between This connection allows you to watch DTV (digital TV broadcast), the TV and DTV receiver. You can connect the ColorStream cables from the DTV receiver to VCR, and TV programs, and record DTV and TV programs. You either ColorStream jack on the TV (HD1 or can record from one source while watching a program from another HD2). sou
Connecting two VCRs This connection allows you to record (dub/edit) from one VCR to another VCR while watching a videotape. You can also record from one TV channel while watching another TV channel. You will need: Caution: • one coaxial cable The unauthorized recording of television • two pairs of audio cables (two single audio cables for mono programs, videotapes, and other materials VCRs) may infringe upon the provisions of copyright • two video cables (two S-video cables for S-VHS VCRs) laws.
Connecting an audio system From Cable, Cable Box, or Antenna This connection allows you to use an audio amplifier to adjust Amplifier the audio level. This also allows you to use external speakers. To control the audio, turn on the TV and the stereo amplifier, LINE IN LR and turn off the built-in speakers (see“ Turning off the built-in speakers” on page 49). You will need: TV • one pair of audio cables AUDIO CENTER CHANNEL IN ( ) ANT 75 Note: ANT-1 ON OFF To hear sound when using an external
Using the remote control Note: Preparing the remote control for use Your TV’s remote control may not operate Your Toshiba TV remote control has one dedicated TV mode and five certain features on your VCR, cable TV universal modes: VCR, Cable/SAT, DVD, Audio1, and Audio2. The converter, or other electronic device. target devices and default devices being programmed for each mode Refer to the owner’s manuals for your other are as follows: devices to determine their available features. Target devic
Remote Control functional key chart Toshiba TV Cable Satellite VCR DVD/LD Receiver CD/MD Cassette Key Label (TV) (CBL/SAT) (CBL/SAT) (AUDIO) (AUDIO) (VCR) LIGHT Lights the remote key, and toggles between enabled and disabled Illumination mode. SLEEP Sleep timer --- --- --- --- --- --- --- POWER Power Power Power Power Power Power Power Power 1/MOVIE Digit 1 Digit 1 Digit 1 Digit 1 Digit 1 AV input 1 Digit 1 Digit 1 2/SPORTS Digit 2 Digit 2 Digit 2 Digit 2 Digit 2 AV input 2 Digit 2 Digit 2 3/NEW
Toshiba TV Cable Satellite VCR DVD/LD Receiver CD/MD Cassette Key Label (TV) (CBL/SAT) (CBL/SAT) —— (AUDIO) (AUDIO) (VCR) TV/VCR VCR Bypass A/B TV/SAT TV/VCR --- --- --- --- AM/FM DISC --- --- --- --- Disc shift AM/FM Disc shift Deck side A/B switch STOP VCR VCR VCR Stop Stop Stop Stop Stop REC VCR VCR VCR Record --- Record Record Record PIP CH yz POP channel TV TV TV TV TV TV TV up/down PIP POP on/off
Programming the remote control for use with your audio/video devices Device code setup Note: 1. Refer to the Device code table on pages 17–20 to find the code for the brand of your device. • Every time you replace the batteries, you must reprogram the remote control. If more than one number is listed, try each one separately until • Some newer VCRs are capable of working you find the one that works. on either of two remote codes. These VCRs 2. Press MODE until the Mode indicator of the device (C
Verifying the device code (990) Use this feature to verify the codes for your other devices. The number of blinks after pressing the 1, 2, 3, and 4 buttons is the 4-digit code set up for that mode. For example, to verify the device code of the VCR: Number 1. Press MODE to select the VCR mode. MODE 2. While holding down the RECALL button, press 9–9–0. 3. Press 1 ➝ 0 blinks. 4. Press 2 ➝ 3 blinks. 5. Press 3 ➝ 8 blinks. 6. Press 4 ➝ 5 blinks. This verifies that the device code of the VCR mode is “
Device code table Cable box setup codes Satellite Receiver setup codes Brand Code Brand Code ABC 0020, 0022, 0026, SL Marx 0059 AlphaStar 0791 Samsung 0059, 0163 0027, 0030, 0032, Chaparral 0072, 0235 0033, 0036 Scientific Atlanta 0027, 0036, 0496, Curtis Mathes 0080 0896 Allegro 0172, 0334 Echostar 0288, 0299, 0794, Americast 0918 Seam 0529 1024 Signal 0034, 0059 Antronix 0041, 0226 Expressvu 0794 Archer 0041, 0172, 0226, Signature 0030 General Instrument 0380, 0646, 0888 Sprucer 0040 0816 HTS
Device code table VCR setup codes Brand Code Admiral 0067, 0228 Kenwood 0057, 0060, 0086, Radix 0056 0403 Randex 0056 Adventura 0019 Aiko 0297 Kodak 0054, 0056 Realistic 0019, 0054, 0056, LXI 0056 0065, 0066, 0067, Aiwa 0019, 0056, 0326 Akai 0060, 0072, 0080, Lloyd's 0019, 0227 0081, 0085, 0123 Logik 0091 ReplayTV 0633, 0635 0125 America Action 0297 MEI 0054 Ricoh 0053, 0272 MGA 0062, 0080, 0259 Runco 0058 American High 0054 Asha 0259 MGN Technology 0259 STS 0061 MTC 0019, 0259 Samsung 0064, 007
Device code table DVD setup codes CD Player setup codes Brand Code Brand Code Aiwa 0660 ADC 0037 Sanyo 0106, 0198 Scott 0174, 0183, 0324 Denon 0509, 0653 Adcom 0174, 0253 GE 0541 Aiwa 0143, 0176 Sears 0324 Sharp 0056, 0199, 0880 Harman/Kardon 0601 Akai 0175 JVC 0577, 0642 Audio Alchemy 0213 Sherwood 0199, 0215, 0445, 1086 Kenwood 0553 Audio-Technica 0189 Magnavox 0522 BSR 0213, 0264 Sony 0019, 0204, 0509, 0623, 0624 Marantz 0558 Burmester 0439 Mitsubishi 0540 California Audio Labs 0048, 0322 Sou
Device code table Amplifier setup codes Misc. Audio setup codes Brand Code Brand Code Aiwa 0425 Aiwa 0029, 0178, 0423 Pioneer 0033, 0099, 0169, 0550, 0649, 1042 Carver 0288 Fisher 0071 Curtis Mathes 0319 Harman/Kardon 0496 Proscan 1273 Quasar 0058 Denon 0179 JBL 0496 GE 0097 JVC 0092 RCA 0073, 0365, 0379, 0549, 0550, 1173, Harman/Kardon 0911 Jerrold 0478, 0539 JVC 0350 Nikko 0395 1273 Realistic 0182, 0200, 0214 Linn 0288 Paramount Pictures 0336 Magnavox 0288 RCA 0075 Sansui 0208, 0212, 0365, 110
|1||Toshiba 14DL74||Flat Panel Television||274|
|2||Toshiba 15DL75||Flat Panel Television||58|
|3||Toshiba 15DLV16||Flat Panel Television||26|
|4||Toshiba 15CV100U||Flat Panel Television||32|
|5||Toshiba 15DL72||Flat Panel Television||14|