Our goal is to provide you with a quick access to the content of the user manual for Haier HL19K1. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Haier HL19K1.
If looking through the Haier HL19K1 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Haier HL19K1 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Haier HL19K1. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
LCD TV & LCD TV/DVD Combo
Please read this manual carefully
before using this TV set and keep it
for future reference.
WARNING AND CAUTION CAUTION RISK ELECTRIC SHOCK DO NOT OPEN ! ! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the produc
IMPORTANT SAFETY INSTRUCTIONS Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Protect the
Safety Instructions(for TV with DVD) PRECAUTIONS FCC WARNING-This equipment may CAUTION:USE OF CONTROLS OR generate or use radio frequency ADJUSTMENTS OR PERFORMANCE energy.Changes or modifications to this OF PROCEDURES OTHER THAN equipment may cause harmful THOSE SPECIFIED HEREIN MAY interference unless the modifications are RESULT IN HAZARDOUS RADIATION expressly approved in the instruction EXPOSURE. manual.The user could lose the authority to operate this equipment if an unauthorized
CONTENT Safety Notice Items................................................................................... 1 Front Panel Controls.................................................................................. 2 Connection Options................................................................................... 3 Remote Control ........................................................................................ 4 Remote Control Key Functions............................................
Safety Notice Items Incorrect usage may cause fire or electric shock. To prevent this, please do as required when you are installing, using and cleaning this machine. To ensure your safety and extend the life-span of LCD-TV, please read the following items carefully before using: l Please read and understand all the instructions before operation; l Please keep this manual for later use; l Please comply strictly with the warning instructions on the machine and in this book; l Pleas
Front Panel Controls INPUT MENU VOL- VOL+ CH- CH+ POWER R1 series K1series F1series Control Panel Function 1. POWER Press to turn on and off the TV. 2. INPUT Selects the input signals. 3. MENU Menu display. Press to access the on-screen menu display. 4. VOL- Volume down / Left button to adjust the item in the OSD. VOL+ Volume up / Right button to adjust the item in the OSD /Press to ent
Connection Options DVD R1 series K1 series STOP P L AY /PA U S E O P E N /C L O S E OPEN/CLOSE P L A Y /P A U S E S TO P PREV PREV NEXT NEXT The above figure is for reference DVD insert only, connections may differ depending upon the models and terminals of some models may be on the back bottom of the set Label towards back ATN IN R-AUDIO-L S-VIDEO IN R-AUDIO IN-L VIDEO USB VGA IN PC AUDIO IN HDMI Pr Pb Y COMPONENT IN 1.ANT IN(Antenna Input)
Remote Control Installing Batteries Remove the battery cover. Insert two size AAA batteries matching the +/-polarities of the battery to the +/- marks inside the battery compartment. Precautions As strong light may interfere with the Make sure that there is no signals, change your position to obstacle between the remote operate the remote control if controller and television set. the television cannot be turned on or off as expected. Make sure that two AA 1.5V or AAA Keep the remote
Remote Control Key Functions When using the remote control, aim it towards the remote sensor on the TV 1.Press to turn on and off the TV 2.Press to switch input source to USB in 1 USB DVD 3.Display the guide when you are watching analog or 2 21 digital channels GUIDE CCD MTS/SAP CH.LIST 4.Select a closed caption 3 22 5.Press repeatedly to cycle through the available picture 4 23 PIC TU RE AU DIO ARC FAVORITE modes 24 5 6 25 6.Press to cycle through different sound settings 7.Show the inp
Remote Control Key Functions When using the remote control, aim it towards the remote sensor on the TV 1.Press repeatedly to cycle through the available 14 PICTURE AUDIO picture modes 1 15 ARC CCD MTS/SAP SLEEP 2.Press to change the aspect ratio 16 2 3.Select a closed caption 3 17 4.Show the input source 1 2 3 5.Press to open the on-screen menu 6.Volume/Channel Selection 4 5 6 7.Exit On Screen Display 18 8.Press to switch input source to USB in 7 8 9 9
Connection Instructions External Equipment Connections Antenna Connection - Antenna or Cable Service with a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments (Connect to wall antenna socket) wall antenna socket Bronze Wire RF coaxial wire (75 ohm) VHF antenna Turn clockwise to tighten. UHF antenna Bronze Wire outdoor Be careful not to bend the bronze antenna wire when connecting the antenna. Single-family Dwellings /Houses
R-AUDIO-L S-VIDEO IN Pr Pb Y COMPONENT IN VGA IN PC AUDIO IN Connection Instructions VGA Setup You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD -TV and the PC are off; 3.Connect a D type 15-pin PC interface cable ( not supplied ) to the PC video
ATN IN R-AUDIO-L S-VIDEO IN R-AUDIO IN-L VIDEO HDMI Pr Pb Y COMPONENT IN Connection Instructions VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV Connection and use steps: 1.Read the user guide supplied with your AV devices and ensure that it has Composite or S-Video connectors; 2.Make sure that the power of the LCD-TV and the AV device are off; Connection Option 1 Set VCR output switch to 3 or 4 and then
ATN IN R-AUDIO-L S-VIDEO IN R-AUDIO IN-L VIDEO R-AUDIO IN-L VIDEO Pr Pb Y COMPONENT IN Connection Instructions Cable TV Setup - After subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV. - For further information regarding cable TV service, contact your local cable TV service provider(s). Connection Option
Basic Operating Instructions Switch On/Off the TV set When the POWER button is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the power button, the LCD-TV will go into standby mode and the indicator light turns red(or turns dark). NOTE: The color of the indicator light may differ based upon the model purchased. Choose the input source Change the picture source so you can watch your TV, VCR
Basic Operating Instructions Select the TV Channel You Want You can use the number buttons and button on the remote control to directly select TV channels and press ENTER to confirm. And you can press the buttons(CH+/CH-) on the remote control or on the panel to make a selection. Picture Mode Press PICTURE button on the remote control for menu display . For desired mode as follows: Mild Standard Vivid Custom Audio Mode Press AUDIO button on the remote control for menu display . For desire
Basic Operating Instructions button Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select digital channel “11.1”, press “11”, then press “ ” and “1”. CH.LIST button Press to display the channel list. Press VOL+/VOL- to turn to the next or previous page, press CH+/CH- to select the item and Enter button to select the channel you desired. FAVORATE button Adding favorite channels Press FAVORATE under one channel. The favorite c
Menu Operations * In this manual, the OSD (On Screen Display) may be differ from your TV These are examples to illustrate the TV's operation. Press Input to select the input source. The menu for each source may be different . 1. Press MENU button to display the main menu, and / to select the main menu function. 2. Press /ENTER button to enter the sub menu and / to go up and down to select the desired option . 3. Press /ENTER button to confirm and / to make changes to the
Menu Operations Video Menu Options continued Function: Mode: Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in Video menu. You may select the picture mode directly by pressing the PICTURE button on the remote control. Brightness :Press / button and /ENTER to confirm, then press / to adjust the brightness of the picture. Contrast : Press / button and /ENTER to confirm, then press / to adjust the contrast of the picture
|1||Haier 1509-A||Flat Panel Television||165|
|2||Haier 42EP24STV||Flat Panel Television||75|
|3||Haier 20AL25S||Flat Panel Television||22|
|4||Haier 42HP25SAT||Flat Panel Television||33|
|5||Haier 42EP25BAT||Flat Panel Television||13|