Summary of the content on the page No. 1
Dear Sceptre Customer,
Congratulations on your new SCEPTRE E195 High Definition LED backlit
LCD Television purchase. Thank you for your support. To ensure safety and
many years of trouble free operation of your TV, please read the manual
carefully before making any adjustments, and keep them in a safe place for
future reference. We hope you enjoy your new SCEPTRE E195 High
Definition LED backlit LCD Television.
For technical assistance, please call 1800-788-
Summary of the content on the page No. 2
IMPORTANT INFORMATION - 2 - www.SCEPTRE.com SCEPTRE E195 HDTV User Manual
Summary of the content on the page No. 3
SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning t
Summary of the content on the page No. 4
SAFETY INSTRUCTIONS This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference. To avoi
Summary of the content on the page No. 5
plug, have an electrician install the Avoid using dropped or damaged correct outlet, or use an adapter to appliances. If the product is dropped ground the appliance safely. Do not and the housing is damaged, the defeat the safety purpose of the internal components may function grounded plug. abnormally. Unplug the power cord Do not overload power strips and immediately and contact your dealer extension cords. Overloading can for repair. Continued use of the result in fire or elect
Summary of the content on the page No. 6
IMPORTANT INFORMATION Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in
Summary of the content on the page No. 7
Opening the Package The SCEPTRE E195 is packaged in a carton. Any standard accessories are packed separately in another carton. The weight of the TV is approximately 12.1 lbs. Due to the size and weight of the product, it is suggested that it must be handled by a minimum of 2 or more persons. Since the glass can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on protective padding. When
Summary of the content on the page No. 8
Attaching or Removing the Stand 1. To attach the base, align the base and the TV. Place the base on the TV’s neck shown below. 2. Rotate the base until you feel the base is locked, insert and tighten the two screws in the circled area. The TV is ready for use. 3. To remove the stand remove the three screws in the circled area and the neck will come off. - 8 - www.SCEPTRE.com SCEPTRE E195 HDTV User Manual
Summary of the content on the page No. 9
Table of Contents IMPORTANT INFORMATION .............................................................................................................. 2 SAFETY INSTRUCTIONS .................................................................................................................... 3 SAFETY INSTRUCTIONS .................................................................................................................... 4 IMPORTANT INFORMATION ...................................
Summary of the content on the page No. 10
Identifying Front and Rear Panel Front View INDICATOR LIGHT – The light is red when power is plugged in but the TV is not turned on. The light turns blue when the TV is turned on. Because of the LED in the panel, the E195 LED backlit LCD TV might take 10 – 12 seconds to power on. REMOTE SENSOR – The remote sensor receives all the commands from the remote control. Rear View Mounting Pattern Mounting Specification : 100mm x 100mm
Summary of the content on the page No. 11
Top side Control Buttons 1. VOL(-) – This button decreases the TV’s volume. If a sub-menu is active, pressing this button will move the selection left. 2. VOL(+) – This button increases the TV’s volume. If a sub-menu is active, pressing this button will move the select right. 3. CH(▼) – This button changes the TV channel down. If the OSD is active, this button functions as down for the menu. 4. CH(▲) – This button changes the T
Summary of the content on the page No. 12
Rear View Connections 1. DC – This connection connects to an AC adapter for powering the TV. 2. USB – USB connects to USB flash drives for playing music and picture. The USB port is also used for updating the TV’s firmware. 3. HDMI1 – HDMI connects to devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite set-top box. This connection port receives pure digital audio and high definition signal throug
Summary of the content on the page No. 13
boxes that use component cables. From left to right, connect green, blue, and red for video, and then connect white for left channel audio, and red for right channel audio. Please Note: audio is shared with Video port. 10. Video – Video connects to devices that use composite video cables such as VCR or DVD player or Wii™. Connect the yellow for video and the red / white for audio. Please Note: audio is shared with YPbPr port. 11. LR – These two connections are audio connection for eit
Summary of the content on the page No. 14
SCEPTRE E195 Remote Control This remote control follows SONY’s universal remote code. To find the actual code you need to consult your cable or satellite tech support. - 14 - www.SCEPTRE.com SCEPTRE E195 HDTV User Manual
Summary of the content on the page No. 15
For universal remotes, this TV follows SONY’s universal remote code. You need to find the actual code from your cable or satellite or universal remote provider. 1. POWER – Turns the TV on or off. 2. 0~9 – Sets the channels. 3. Dash (-) – Inserts the dash for selecting digital channels directly. 4. GUIDE – Opens the current digital channel information guide. 5. CH(+)▲ / CH(-)▼ / VOL(-)◄ / VOL(+)► – Selects and moves the item on screen. CH(+)▲ / CH(-)▼also functions as channel up and d
Summary of the content on the page No. 16
Connection Suggestions If You Have Digital Cable without Cable Box or Antenna… 1. Make sure the power of E195 LED backlit LCD HDTV is turned off. 2. Connect the Coaxial RF cable from your antenna or digital cable to the TV port on the back of your E195 LED backlit LCD HDTV. 3. Turn on the E195 LED backlit LCD HDTV. 4. Follow the first time on screen instructions. Please Note : Not all broadcasts are in High Definition (HD). Please refer to
Summary of the content on the page No. 17
Connecting DVD Player with Component YPbPr… 1. Make sure the power of E195 LED backlit LCD HDTV and your DVD player is turned off. 2. Obtain a Component Cable. Connect the green color connector to both your DVD player and YPbPr’s green connector port on the back of your E195 LED backlit LCD HDTV. 3. Connect the blue color connector to both your DVD player and YPbPr’s blue connector port on the back of your E195 LED backlit LCD HDTV. 4. Connect
Summary of the content on the page No. 18
Connecting Wii™ with Composite… 1. Make sure the power of E195 LED backlit LCD HDTV and your Wii™ is turned off. 2. Obtain a Yellow Video Cable. Connect the Yellow Video connector to both your Wii™ and AV’s Yellow Video connector port on the back side of your E195 LED backlit LCD HDTV. 3. Obtain a RCA Audio Cable. Connect the white color connector to both your Wii™ and AV’s white connector port on the back side of your E195 LED backlit LCD HDT
Summary of the content on the page No. 19
Connecting Cable or Satellite boxes with HDMI… 1. Make sure the power of E195 LED backlit LCD HDTV and your set-top box is turned off. 2. Connect a HDMI cable to the HDMI output of your set-top box and the other end to the HDMI port on the back of your E195 LED backlit LCD HDTV. 3. Turn on the E195 LED backlit LCD HDTV and your set-top box. 4. Use the remote control’s source button or the source button on the TV to switch to HDMI. Please Note :
Summary of the content on the page No. 20
Connecting to a PC with VGA and 3.5 mm minijack … 1. Make sure the power of E195 LED backlit LCD HDTV and your PC is turned off. 2. Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the other end to the VGA port on the back of your E195 LED backlit LCD HDTV. 3. Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the other end to the VGA Stereo Input port. 4. Turn on the power of the E195 LED backlit LCD H
