Summary of the content on the page No. 1
Phaser® 5500 Laser Printer
Novell NetWare
This topic includes:
■ "Configuration Software for NetWare Networks" on page 3-35
■ "Quick Setup" on page 3-35
■ "Advanced Setup" on page 3-35
■ "NetWare 4.x, NetWare 5.x, and NetWare 6.x Print Server Setup" on page 3-36
■ "Novell NetWare Troubleshooting" on page 3-36
Configuration Software for NetWare Networks
CentreWare DP configures the printer and the network when using NetWare 4.x, 5.x, and 6.x.
CentreWare DP is a Novell Directory Service (NDS)/Bin
Summary of the content on the page No. 2
Novell NetWare NetWare 4.x, NetWare 5.x, and NetWare 6.x Print Server Setup The Phaser printer defaults enable connection to Novell NetWare without adjustment. Review the “Configuration Page” and verify the following settings: ■ NetWare is enabled ■ Frame Type matches the frame type of the desired file server ■ PDL is set to your desired PDL (PostScript or PCL) or to Auto. You may wish to set PDL to the desired type if only one PDL is used ■ Desired Novell mode is set to either NDS/BEM, NDS, o
Summary of the content on the page No. 3
Novell NetWare Requirements Verify that you: ■ Are operating a Windows-based system with CentreWare DP software installed and at least one printer driver installed ■ Are a NetWare Network Administrator, an administrative person with ADMIN/ SUPERVISOR, or ADMIN/SUPERVISOR EQUIVALENT within login rights to the NetWare Server(s) servicing the Phaser printer ■ Have a basic knowledge of NetWare Novell NetWare Troubleshooting Quick Check 1. Verify that the printer is plugged in, turned On, and conne
Summary of the content on the page No. 4
Novell NetWare Novell NetWare Hardware Step-By-Step Note the LED activity on the printer. The green link LED is ON whenever it is connected to an active network. The amber traffic LED is flickering when data is being received. 1. Verify the following: ■ The cable connections: Use a new cable or connectors if possible ■ Which port your printer is attached to. Connect a functioning network device to your printer to test the port. 2. Print the “Configuration Page” from your printer. For informat
Summary of the content on the page No. 5
Novell NetWare 5. Verify that the information displayed is also contained on the “Configuration Page”. Verify these items: a. The queue name of the Phaser printer is set to service. If necessary, create a new queue to test the printer. b. The Primary Server lists the server name on the “Configuration Page”. Printing a Document 1. Click the Tools drop-down list. 2. Select the Send File... menu item, then select the appropriate directory and file for downloading. Verify that this is a valid fil
