Garmin GPS 18 user manual

Summary of the content on the page No. 1

GPS 18
™
with nRoute Navigation Software
setup guide
This setup guide includes instructions to
connect your GPS 18 to your computer,
install software on your computer, and
unlock the detailed maps.
To ensure a successful installation, follow
the steps outlined in this guide. Do not
connect the USB cable to your PC until
you are instructed to do so.
190-00309-02 Rev. A

Summary of the content on the page No. 2

Attention! Do not connect the enclosed Garmin USB cable to your computer until you have loaded the MapSource software. Step 1: Install nRoute 1. Insert the DVD into your computer’s DVD-ROM drive. If auto-run is enabled, your computer will automatically display a welcome screen. If the start-up file does not run automatically, click the Start button, select Run…, and then type the drive letter of your DVD-ROM drive followed by setup (example: “E:\setup”). Press Enter. 2. Click Install nRout

Summary of the content on the page No. 3

GPS 18 USB 1. Insert the end of the GPS 18 USB cable into an available USB port on your computer. GPS 18 USB in USB Port of Computer 2. Once the GPS 18 USB is connected, Windows should automatically locate and install the drivers. If Windows is unable to locate and install the drivers, select your DVD-ROM drive from the “Add New Hardware” Wizard dialog box (Example: “E:”). Step 3: Install Detailed Maps Click Install Detailed Maps and follow the instructions on your computer screen. Step

Summary of the content on the page No. 4

For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com. © 2005 Garmin Ltd. or its subsidiaries Garmin International, Inc. st 1200 East 151 Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U.K. Garmin Corporation nd No. 68, Jangshu 2 Road, Shijr, Taipei County, Taiwan www.garmin.com Part Number 190-00309-02 Rev. A