Harbor Freight Tools 08825 user manual

Summary of the content on the page No. 1

SPOTLIGHT
3 Million Candle Power with 9” Lens
OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
© ®
Copyright 2003 by Harbor Freight Tools . All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353

Summary of the content on the page No. 2

SPECIFICATIONS ITEM DESCRIPTION Lens 9" Diameter Round x 1/8" Thick Glass Lens Construction ABS-Orange with Black Ring Rated Candle Power 3 Million (ON2 Setting), 1 Million (ON1 Setting) Light Source 115 Watt Blue Halogen Bulb (H-3 / 12V) Power Source Two 6V, 4Ah Batteries Power Adapter 120 VAC / 60 Hz Output Voltage 15 VDC Car Adapter Auto-Lighter-Type, Fused w/ 5 Ft. Long Cord Weight 6.5 Lbs. Overall Dimensions 9" W X 11" in Length SAVE THIS MANUAL You will need the manual for the safety warn

Summary of the content on the page No. 3

9. AVOID TOUCHING THE LENS as it may become hot during operation. 10. DO NOT DISASSEMBLE THE BATTERY or remove any parts from the Battery and surrounding connections. 11. DO NOT ALLOW THE SPOTLIGHT TO BE EXPOSED TO FIRE OR HIGH HEAT as this may result in an explosion. 12. DISCONNECT POWER. Unplug charger when not in use. 13. MAINTENANCE. For your safety, maintenance should be performed regularly by a qualified technician. 14. SPOTLIGHT IS NOT COMPLETELY WATERPROOF. Warning: The warnings, caution

Summary of the content on the page No. 4

CHARGING INSTRUCTIONS Actual charging of the Spotlight Battery is required before using the Spotlight. To recharge the Battery follow the directions below. 1. To charge the Battery (3), your Spotlight comes with an AC/DC Adapter (19). Lift the Waterproof Stopper (7) on top of Spotlight. Insert the round end of the AC/DC Adapter (19) into the AC/DC Socket (13). Plug the prong end of the AC/DC Adapter (19) into an electrical outlet. The red charging light will turn on while the

Summary of the content on the page No. 5

REPLACING BATTERY Remove Rear Cover (2). Remove pin/connectors from the old Battery. Reconnect Red and Black pins/connectors to the proper corresponding connectors on the new battery. After connecting properly, put the new Battery back in Housing. Replace Rear Cover (2). Caution: Burns or an explosion could occur if handled improperly. (See Battery Disposal). See Figure E. Glass Lens (11) Batteries (3) Reflector Battery Glass (10) 4 Connecting Wire (1) Bulb (18) Battery Lamp Lid (12) Cover (2)

Summary of the content on the page No. 6

PARTS LIST PART DESCRIPTION QTY Battery Connecting Wire 1 1 Rear Cover 1 2 Battery 2 3 Plastic Body Housing 1 4 Rubber Cover 1 5 3-Way Slider Switch Cover 1 6 Waterproof Stopper over Adapter Socket 1 7 Iron Ring 1 8 Sealing Ring 1 9 Reflector Glass 1 10 Glass Lens 1 11 Lamp Lid 1 12 Socket (Power Adapter) 1 13 Switch 1 14 Circuit Board 1 15 Charging Light 1 16 12 V Inlet 1 17 Bulb 1 18 AC/DC Adapter 1 19 Car Adapter 1 20/21 Adjustable Stand (front) (not sho