Sylvania SC11 user manual

Summary of the content on the page No. 1

SYLVANIA Emergency Lighting
Installation Instructions
Installation Instructions for Emergency Lights
Model SC36, SC11
SAVE THESE INSTRUCTIONS
• Before Installation, read instructions and understand all safety information.
WHEN INSTALLING AND USING ELECTRICAL EQUIPMENT, ALL WORK SHOULD BE PERFORMED BY A LICENSED
ELECTRICIAN AND BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE OBSERVED INCLUDING BUT NOT LIMITED TO
THE FOLLOWING:
WARNING
• To prevent shock or damage, turn power off before inspe

Summary of the content on the page No. 2

Step 2: Remove cover plate by first removing the screw caps and then unscrewing the screws. Save screws. Step 3: If installing into OPEN wall or ceiling in NEW construction, set adjustable flange to proper depth according to the thickness of the drywall you plan to use. Measure height and depth of installation and use two of the four screws - to anchor the flange to the stud. A standard hanger bar can also be utilized for more stability. After installing the unit, secure interior plastic dust

Summary of the content on the page No. 3

MAINTENANCE NOTICE Replace internal battery every three years or according to ambient temperature guidelines provided by battery unit manufacturer (sold separately), to ensure proper operation. NOTE: Servicing of parts should be performed by qualified service personnel. For replacement lamps or batteries, contact your local representative. Painting or wallpapering front cover plate: 1. When painting cover plate, be sure to first use a primer coat, prior to final color matching. 2. After each