Chamberlain SECURITY 4620-2 user manual

User manual for the device Chamberlain SECURITY 4620-2

Device: Chamberlain SECURITY 4620-2
Category: Home Security System
Manufacturer: Chamberlain
Size: 1.19 MB
Added : 11/16/2013
Number of pages: 40
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Chamberlain SECURITY 4620-2. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Chamberlain SECURITY 4620-2.

For your convenience

If looking through the Chamberlain SECURITY 4620-2 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Chamberlain SECURITY 4620-2 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Chamberlain SECURITY 4620-2 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Chamberlain SECURITY 4620-2 User manual - Online PDF
Advertisement
« Page 1 of 40 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Chamberlain SECURITY 4620-2 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Chamberlain SECURITY 4620-2. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

The Chamberlain Group, Inc.
A DUCHOSSOIS ENTERPRISE
845 Larch Avenue
Elmhurst, Illlinois 60126-1196
www.chamberlaingroup.com
Complies with UL 325
regulations effective
January 1, 1993
®
®
Garage Door Opener
Models 4620 & 4620-2
1/2 HP
For Residential Use Only
Owner’s Manual
n Please read this manual and the enclosed safety materials carefully!
n Fasten the manual near the garage door after installation.
®
n The door WILL NOT CLOSE unless the Protector System is connected
and properly aligned.
n

Summary of the content on the page No. 2

Contents Safety alert symbol review............................................2 Complete the safety reversing sensor installation.....22 Safety information, precautions, tools ..........................3 Install the lights and lens ..........................................23 Testing your garage door for binding & balance ..........3 Attach the manual release rope and handle...............23 Carton inventory ...........................................................4 Fasten the door brac

Summary of the content on the page No. 3

1 Safety Information, Precautions, Tools WARNING CAUTION CAUTION An unbalanced garage door might not reverse when To avoid damage to the garage door and opener, disable required and someone under the door could be seriously locks before installing and operating the opener. Use a injured or killed. wood screw or nail to hold locks in the "open" (unlocked) position. If your garage door binds, sticks or is out of balance, call for professional garage door service. Garage doors, door Operation at ot

Summary of the content on the page No. 4

Carton Inventory Your garage door opener is packaged in one carton which contains the power unit and all parts illustrated below. If anything is missing, carefully check the packing material. Parts may be "stuck" in the foam. KEEP THE FOAM INTACT (see page 10). Hardware for assembly and installation is shown on page 5. Models 4620 (1), 4620-2 (2) Sprocket Coupling SECURITY✚ Single-Function Lighted Door Remote Control Transmitter Control Button Rail Assembly Remote Control Transmitter Visor Clip

Summary of the content on the page No. 5

NOTICE Hardware Separate all hardware from the packages in the rail carton and the opener carton and group as shown below, for the assembly and installation procedures. Assembly Hardware Bolt 1/4" - 20 x 5/8" Lock Nut 1/4-20x1-3/4" (8) Hex Screw (4) 1/4"-20 x 7/16 (12) Sprocket Coupling Sleeve Installation Hardware Carriage Bolt Ring Wing Nut (2) Lock Washer 5/16" (6) 1/4"-20x1/2" (2) Fastener (3) Lag Screw Handle 5/16"-9x1-5/8" (2) Hex Screw 5/16"-18x7/8" (4) Nut 5/16"-18 (6) Lag Screw 5/16

Summary of the content on the page No. 6

— — — — — — — — SECTIONAL Door Installation Before you begin, survey your garage area to see whether any of the conditions below apply to your installation. You may find it helpful to refer back to this page as you proceed with the installation of your opener. FINISHED CEILING Support bracket & fastening hardware is required. Horizontal and vertical reinforcement See page 20. is needed for lightweight garage doors (fiberglass, steel, aluminum, door with glass panels, etc.). See p

Summary of the content on the page No. 7

ONE-PIECE Door Installation Before you begin, survey your garage area to see whether any of the conditions below apply to your installation. You may find it helpful to refer back to this page as you proceed with the installation of your opener. FINISHED CEILING Support bracket & fastening hardware is required. See page 20. Header Wall One-Piece Door without Track Closed Position Rail Bracket Access Door Rail Assembly Header Trolley Bracket Door Bracket Manual Release Rope & Handle Straight Curv

Summary of the content on the page No. 8

Assembly Section: Pages 8 - 11 ASSEMBLY STEP 1 To avoid installation difficulties, do not run the garage Assemble the Rail door opener until instructed to do so. Straight Door Arm Extend End Rails Remove Outward Cardboard Packing Rail Center Support Rail Braces Trolley Rack Rail Assembly Chassis Assembly Hardware Bag Hardware Bag Rail Assembly Carton Remove Extend Cardboard Packing End Rails Outward 1. Turn the opened rail carton upside down, emptying its contents onto a level work surface

Summary of the content on the page No. 9

ASSEMBLY STEP 1 (Continued) Assemble the Rail The Chamberlain Group, Inc. 4. Beginning with the sprocket end, straighten the two 7. Keeping the rail straight and on a level surface, grasp Screw Drive LM rail sections so that the screw rod is in a straight line at the screw rods on each side of the remaining joint and 3-Piece Rail the joint. (Avoid handling the joints, which may have pivot into a straight line. Repeat steps 5 and 6. sharp edges.) Align Rails & Attach Support Brackets 8. With

Summary of the content on the page No. 10

ASSEMBLY STEP 2 Fasten the Rail To the Power Unit and Install the Trolley NOTE: To aid in assembly and installation, replace the foam packing around the power unit. Remove it /7/94 after Installation Step 5. • Working on a level surface, align the rail assembly with Rail/Power Unit Power Unit Bracket Sprocket the power unit, as shown. Lock Nuts 1/4"-20 • Slip the coupling over the rail sprocket. • Slide the rail through the power unit bracket until the coupling fits securely over the power unit

Summary of the content on the page No. 11

ASSEMBLY STEP 3 Attach the Rail Brackets 1/4"-20 Rail Lock Nuts • Align rail brackets to end of rail assembly, as shown. Brackets • Insert two 1/4"-20 x 5/8" hex screws and lock nuts. Tighten securely with a 7/16" socket. Hardware Shown Actual Size 1/4" - 20 1/4"-20x5/8 1/4" - 20 x 5/8" Lock Nut Rail Hex Hex Screw Screws You have now finished assembling your garage door opener. Please read the following warnings before proceeding to the installation section: IMPORTANT INSTALLATION INSTRUCTIO

Summary of the content on the page No. 12

Installation Section: Pages 12 – 27 Installation Step 1 WARNING Determine Header Bracket Location If the header bracket is not rigidly fastened to a Installation procedures vary according to garage structural support on the header wall or ceiling, the door types. Follow the instructions which apply to safety reverse system may not work properly (see your door. page 30). The door might not reverse when required, and could cause serious injury or death. The garage door springs, cables, pulleys,

Summary of the content on the page No. 13

The Chamberlain Group, Inc. Position Header Bracket One Piece Door Without Track 1/30/92 - 4/7/92 ONE-PIECE Door Without Track Read the Safety Instructions on page 12. They also apply to doors without tracks. Unfinished Header Wall • Close the door and mark the inside Ceiling Vertical vertical centerline of your garage door. Centerline 2x4 Extend the line onto the header wall above door. Structural Supports If headroom clearance is minimal, you can install the header bracket on the The Chamberl

Summary of the content on the page No. 14

Installation Step 2 Install the Header Bracket You can attach the header bracket either to the wall above the garage door, or to the ceiling. Follow the instructions which will work best for your particular requirements. Fastening the Header Bracket to the Ceiling Fastening the Header Bracket to the Wall • Center the bracket on the vertical guideline with the • Extend the vertical guideline onto the ceiling as shown. bottom edge of the bracket on the horizontal line as • Center the bracket

Summary of the content on the page No. 15

Installation Step 3 Attach the Rail to the Header Bracket The Chamberlain Group, Inc. Foam/Rail to Header Bracket New Rail Assy. • Position the opener on the garage floor below the 12/6/94 header bracket. Use packing material as a protective base. If the door spring is in the way you’ll need help. Have someone hold the opener securely on a temporary support to allow the rail to clear the spring. Header Wall • Position the rail bracket against the header bracket. Header Bracket • Align the

Summary of the content on the page No. 16

® The Protector System IMPORTANT INFORMATION ABOUT THE SAFETY REVERSING SENSOR WARNING The safety reversing sensor must be connected and Without a properly working safety reversing sensor, aligned correctly before the garage door opener will persons (particularly children) could be injured or killed move in the down direction. This is a required safety by a closing garage door. Read and follow all device and cannot be disabled. instructions. To protect small children, install the safety reversin

Summary of the content on the page No. 17

Installation Step 4 Install the Safety Reversing Sensor (Receiving and Sending Eyes) INSTALLING THE BRACKETS DOOR TRACK MOUNT (Right Side) Figure 1 Be sure power to the opener is disconnected. Install and align the brackets so the sensors will face each other across the garage door, with the beam Door Track from 4 – 6" above the floor. Lip They may be installed in one of three ways, as follows. Indicator light Garage door track installation (preferred): • Slip the curved arms over the rounded

Summary of the content on the page No. 18

Installation Step 4 (Continued) Install the Safety Reversing Sensor Mounting and Wiring the Safety Sensors Figure 4 • Slide a 1/4"-20x1/2" carriage bolt head into the slot on each sensor. Use wing nuts to fasten sensors to brackets, Wing nut with lenses pointing toward each other across the door. Be sure the lens is not obstructed by a bracket extension. See Figure 4. 1/4"-20x1/2" • Finger tighten the wing nuts. Carriage bolt Lens Recommended Wire Routing 1. Using insulated staples, run the wire

Summary of the content on the page No. 19

Installation Step 5 CAUTION CAUTION Position the Opener Follow instructions which apply to your door type To prevent damage to steel, aluminum, fiberglass or as illustrated. glass panel doors, do not rest the opener on the door without using a 2x4. SECTIONAL Door or ONE-PIECE Door with Track A 2x4 laid flat is convenient for setting an ideal door- to-rail distance. Rail 2x4 • Raise the opener onto a stepladder. You will need help at this point if the ladder is not tall enough. Foam • Open the

Summary of the content on the page No. 20

The Chamberlain Group, Inc. Installation Step 6 WARNING WARNING Screw Drive Liftmaster #114A1794 Hang the Opener Hang Opener Chassis The opener could fall and injure someone if it is not properly secured. Fasten the opener securel y to 6/18/94 structural supports of the garage. Two representative installations are shown. Yours may be different. Hanging brackets should be angled, Figure 1, to provide rigid support. On finished ceilings, Figure 2, attach a sturdy metal bracket to structu


Alternative user manuals
# User manual Category Download
1 Chamberlain 935CB User manual Home Security System 2
2 Chamberlain 377LM User manual Home Security System 2
3 Chamberlain 942FPC User manual Home Security System 1
4 Chamberlain BG790 User manual Home Security System 0
5 Chamberlain BG770 User manual Home Security System 0
6 Chamberlain 955D User manual Home Security System 0
7 Chamberlain Cllad Remote Light Control CLLAD User manual Home Security System 3
8 Chamberlain CWA2000 User manual Home Security System 2
9 Chamberlain CWA2000C User manual Home Security System 0
10 Chamberlain PIRV400R User manual Home Security System 0
11 Chamberlain RWA310R User manual Home Security System 0
12 Chamberlain POWERDRIVE Pd612d User manual Home Security System 1
13 Chamberlain SECURITY 4620 User manual Home Security System 0
14 Chamberlain SECURITY HD200DM User manual Home Security System 7
15 Chamberlain THE PROTECTOR SYSTEM 916GA User manual Home Security System 4
16 3Com 1000BASE-T-GBIC User manual Home Security System 0
17 Sony BRCSDP12 User manual Home Security System 3
18 3Com TECHD-0000000122 User manual Home Security System 1
19 Sony SSC-M354 User manual Home Security System 3
20 Sony DIGITAL 8 DCR-TRV130E User manual Home Security System 9