Summary of the content on the page No. 1
STATEMENT D2v
O P E R AT I N G M A N U A L
UPDATES: www.anthemAV.com
S O F T W A R E V E R S I O N 2 . 0 x
™
Summary of the content on the page No. 2
SAFETY PRECAUTIONS READ THIS SECTION CAREFULLY BEFORE PROCEEDING! WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowpoint within an equilateral triangle warns of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock t
Summary of the content on the page No. 3
8. Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered
Summary of the content on the page No. 4
16. Object and Liquid Entry – Never push objects of any kind through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Do not expose this product to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the product. 17. Servicing – Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to
Summary of the content on the page No. 5
TABLE of CONTENTS SECTION PAGE 1. INTRODUCTION 1.1 Before Making Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 In-Use Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.3 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 6
4. OPERATION 4.1 Power On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 4.2 Path Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 4.3 Manually Copying the Main Path to Zone2/3 and Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 4.4 Source Selection . . . . .
Summary of the content on the page No. 7
6. SOFTWARE UPDATING 6.1 Software Version Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 6.2 Software Updating Via Your Dealer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 6.3 Software Updating Via Your Computer and the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Appendix A – IR Macros for Surround Modes and FM
Summary of the content on the page No. 8
Summary of the content on the page No. 9
1. INTRODUCTION Thank you for purchasing the Anthem Statement D2v processor. The Statement D2v is a cutting-edge home theater audio processor with HDMI switching and video upconversion, multizone capabilities, and FM/AM tuner, along with state of the art video processing which includes deinterlacing, scaling, aspect ratio control, and picture adjustment. Anthem products are engineered to recreate the passion of live performance and thrill of the best movie theaters by using the highest level of
Summary of the content on the page No. 10
1. INTRODUCTION continued … 1.3 FRONT PANEL 1 2 3 4 5 6 7 17 16 15 14 13 12 11 10 9 8 1 – Path selection 9 – Mute 2 – Mode and decoder indicators 10 – Status review / setup menu access 3 – Display 11 – Balance setting 4 –FM•AM preset selection 12 – Bass / treble settings 5 –FM•AM tuning / setup menu navigation 13 – LED and display brightness setting / video adjustment menu access 6 – Master Control Knob: 14 – Front panel IR sensor • Volume 15 – Surround mode / Dynamics / THX options / shortcuts
Summary of the content on the page No. 11
1. INTRODUCTION continued … 1.4 FRONT PANEL DISPLAY MAIN Display Example: 1 2 3 DVD1 DolbyHD 1080p 5.1+PLIIx Movie -7.5 5 4 1 – Source selection. 2 – Audio input format or sleep timer if engaged. 3 – Video input resolution. 4 – Volume. 5 – Number of input channels + surround mode. FM•AM Display Example: 1 2 3 FM2-5 St Sk> 480i 101.3 MHz -18.5 dB 4 1 – Band+bank+preset. The tuner has three FM banks (FM1, FM2, and FM3) and one AM bank. 2 – FM mode. Displays “St” when in stereo, “HB” when in Hi-Ble
Summary of the content on the page No. 12
1. INTRODUCTION continued … 1.5 REAR PANEL 1 2 3 4 5 6 7 8 9 10 11 26 12 25 24 23 22 21 20 19 18 17 16 15 14 13 1 – 7 composite video inputs 14 – RS-232 interface (bidirectional) 2 – 7 S-Video inputs 15 – Main audio output (10 jacks) 3 – 5 S-Video outputs 16 – 6-channel analog audio input 4 – 5 composite video outputs 17 – AES/EBU digital audio input 5 – 2 HDMI outputs (parallel) 18 – Analog audio balanced L/R input 6 – 2 component video outputs (3 jacks/ea) 19 – ZONE2, ZONE3, and REC analog aud
Summary of the content on the page No. 13
S H N S N S T P E R K E E A Y O F F S C E A C E P E U R E F F I D A R S S L C X N R Y U M O O D L P F S E B T W I 1. INTRODUCTION continued … 1.6 REMOTE CONTROL 1 1 – IR transmitter (front face) 2 2 – LED 36 3 – Power on for MAIN, ZONE2, and ZONE3 3 Power on/off for other control modes This key does not turn off the processor (see #31) SSP PATH 4 – Control mode (to control other components) 4 MAIN Z2 Z3 CD These are not the source selection keys (see #19) 5 –FM•AM preset setting and selection
Summary of the content on the page No. 14
1. INTRODUCTION continued … 1.7 SPEAKER PLACEMENT These illustrations show typical speaker placement for a 7.1-channel surround system. The surround and rear speakers are normally positioned 2-3 feet above ear level. The subwoofer can be placed in any location where severe resonances are prevented – see section 3.3. 1 3 8 7 4 2 6 5 5 and 6 are not used in a 5.1 system 1. Front-Left 3. Front-Right 5. Rear-Right 7. Surround-Left 2. Center 4. Surround-Right 6. Rear-Left 8. Subwoofer (“.1”) slightly
Summary of the content on the page No. 15
1. INTRODUCTION continued … 1.8 INTERCONNECTS These illustrations show audio, video, IR, and trigger connectors used between source components, the processor, displays, and power amplifiers. RCA coaxial cables with 75-ohm impedance are equally suitable for analog video and digital audio. RCA Black or RCA Red RCA Yellow HDMI Mini DIN White Analog Left Analog Right Digital Audio or Channel Channel Composite Video RCA Green: RCA Blue: RCA Red: Digital Video S-Video Component Y Component Pb Componen
Summary of the content on the page No. 16
2. CONNECTIONS 2.1 VIDEO CONNECTIONS To configure inputs see section 3.6 and to configure video outputs see section 3.1. HDMI: Video is sent with audio from source components to the processor. Maximum video resolution is 1080p60. Connect MAIN HDMI output to a display with HDMI or DVI input – one with High-bandwidth Digital Content Protection (HDCP) is required to display copy-protected material. DVD players usually enable HDCP even on home movies. If the source is protected, only HDMI video outp
Summary of the content on the page No. 17
2. CONNECTIONS continued … 2.2 AUDIO CONNECTIONS Digital Audio Inputs and Outputs: Digital audio source components can be connected with a coaxial, optical, balanced, or HDMI cable. These carry 2-channel PCM, Dolby Digital, and DTS. The HDMI inputs also accept up to eight channels of PCM. Should you need audio from the HDMI output to your display, it’s 2-channel PCM. Use the HDMI inputs if your display has HDCP-compliant HDMI or DVI input, otherwise use the coaxial or optical inputs. The process
Summary of the content on the page No. 18
2. CONNECTIONS continued … Analog Audio Outputs: Balanced connection offers the highest transmission quality over long cable lengths, because it rejects noise pickup. In the processor, XLR output voltage is twice that of RCA (6 dB higher). The RCA outputs and the XLR outputs are always active – both can be used at the same time if the system requires it. Parallel outputs are provided for a second center channel speaker and/or subwoofer. If your screen is large, you might want to use one center c
Summary of the content on the page No. 19
2. CONNECTIONS continued … 2.3 FM•AM ANTENNAS To connect the AM loop antenna, press the spring-loaded tabs of the AM ANTENNA connector and insert the bare ends of the two wires. Move the antenna until best reception is found. To connect the FM antenna, connect the two wires to the screw terminals of the 75-ohm to 300-ohm adapter, then connect the adapter to the FM ANTENNA connector. Move the antenna until best reception is found – this is usually a “T” formation. If your cable company provides F
Summary of the content on the page No. 20
2. CONNECTIONS continued … Example 1: Disc Player to processor to main display HDMI IN
DVD Connect if Connect if using using digital REC-OUT or Connect if Connect for ZONE2/3 or if source’s video using ZONE2 MAIN REC output is DVI L R AUDIO COAX YPbPr OUT HDMI OUT OUT OUT Cable and satellite receivers: HDTV receivers can be connected as above although HDMI connection may be problematic with older models especially when output resolution changes between SD, 720p, and 1080i according to the chan
