Rolls RM65 user manual

Summary of the content on the page No. 1

LIMITED WARRANTY
This product is warranted to the original consumer purchaser to be free from
defects in materials and workmanship under normal installation, use and service for a
period of one (1) year from the date of purchase as shown on the purchaser’s receipt.
The obligation of Rolls Corporation under this warranty shall be limited to repair
or replacement (at our option), during the warranty period of any part which proves
defective in material or workmanship under normal installation, use

Summary of the content on the page No. 2

INTRODUCTION SCHEMATIC Thank you for your purchase of the Rolls RM65 6 x 4 stereo professional Audio Mixer. This unit is a breakthrough in size/performance for an audio mixer. It’s a full-  function 6 channel mixer in a single space 19” rack chassis. It is intended for    %           sound reinforcement, studio, choir, and other applications where high channel to   %       $   
          & $            2  4  size ratio is desired. It has 6

Summary of the content on the page No. 3

SPECIFICATIONS PAN: Adjusts the amount of relative signal to the Right, Left or both Main Out Input Impedance: 600 W balanced jacks. 50K W unbalanced (1/4") FX SEND: Controls the amount of signal (post-volume control) that is sent for that Output Impedance: 50 W TRS Balanced channel to the FX Send jack. Max Input Level: -15 dBV XLR 600 W MASTER CONTROLS +18 dBV 1/4" FX RETURN: Adjusts the amount of signal coming back into the FX Return jack. Phase Shift: < 10 deg. 20 Hz - 20 kHz MASTER VOLUME, R

Summary of the content on the page No. 4

OPERATION The RM65 is ideal for small combo groups where a small number of instruments and microphones need to be mixed together. Refer to Figure 1 for an example of how to connect the inputs and outputs of your RM65. Connect microphones to balanced XLR cables and to the XLR inputs. If any of these microphones are condenser microphones, they will require phantom power. To turn on the phantom power for an individual channel, set the phantom power switch for that channel to the ON (down) position.