Summary of the content on the page No. 1
DIGITAL DECODER
Summary of the content on the page No. 2
Acknowledgement & Trademark Acknowledgment & Trademark All contents are subject to change at any time without notice. No responsibility is assumed for its use; or for infringements of patents or other rights of third parties and no patent or license is implied hereby. All trademarks are the property of their respective owners. Manufactured under license from Dolby Laboratories. "Dolby", "ProLogic " and the double-D symbol are trademarks of Dolby Laboratories. Confidentia
Summary of the content on the page No. 3
?? Reorient or relocate the receiving antenna. ?? Increase the separation between the equipment and receiver. ?? Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ?? Consult your dealer or an experienced radio/TV technician for help. Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
Summary of the content on the page No. 4
Table of Contents Introduction ----------------------------------------------------------------- 4 Checking Package Contents --------------------------------------------------- 4 M6 501P Features ----------------------------------------------------------- 5 Important Safety Instructions -------------------------------------------------- 5 Installation ------------------------------------------------------------------ 6 M6 501P Front Panel -----------------------------------------------
Summary of the content on the page No. 5
Introduction Thank you for purchasing the Klegg M6 501P Surround Sound Decoder. This versatile audio surround sound system has been precisely designed to bring you the most advanced surround modes including DTS, Dolby Digital & Dolby Pro Logic. This system will reproduce six discrete channels of encoded sound tracks with true fidelity and sonic excellence. The M6 501P automatically detects the type of signal present at each input and decodes it based on the original encoded software. The
Summary of the content on the page No. 6
M6 501P Features - DTS - Dolby Digital - Dolby Pro Logic - Bass Management - Sound Field Processing - Equalization Important Safety Instructions To ensure your safety, please read these instructions before operating this unit. 1. Note all instructions and warnings marked on the unit. 2. Always use the correct line voltage. Please refer to page 6 and locate the correct power requirement for your area. Please note that different operating voltages may require the use of different
Summary of the content on the page No. 7
Safety Voltage Chart: The following chart details the correct AC adapter for your country: Input Device Output Area Voltage Frequency AC 100 V 50/60 Hz DC 12V, 1A Japan North America/ M6 501P AC 120 V 60 Hz DC 12V, 1A Taiwan AC 230 V 50 Hz DC 12V, 1A Europe/UK Installation ?? Turn off any electrical or computer device that you plan to connect to the M6 501P. ?? Carefully unpack the M6 501P and its accessories from the transit packaging. ?? Place the M6 501P on a flat, s
Summary of the content on the page No. 8
M6 501P Front Panel 1. The POWER Button This button turns M6 501P ON or OFF. 2. The POWER Indicator This LED lights up when you plug in DC-12V. 3. Speaker Configuration LEDs Each LED represents the status of an individual channel. When a particular channel is active, the LED lights up. A RED LED light means this particular channel has been set to output a wide frequency range that contains bass signals between 20Hz to 120Hz. A GREEN LED light means this particular channel do
Summary of the content on the page No. 9
M6 501P Real Panel (c) OUTPUT AUX 2 AUX 1 LINE L SL C L L L G9 S/PDIF DC+12V R SR SW R R R 5 _ + 1 2 3 4 M6 501P Real Panel 1. G9 Audio Output: This output feeds 6 channels audio signals; L (Front Left), R (Front Right), SL (Surround Left), SR (Surround Right), C (Center) & SW (Subwoofer) to the matching inputs on a control center or power amplifier via G9 (DIN) cable. 2. Main Outputs: The Six outputs feed audio signals to the matching inputs on a control center or
Summary of the content on the page No. 10
Connecting M6 501P (with External Power Amplifier) Game Consoles CD player DVD Player Audio Out Coaxial Audio Out Audio Out Digital digital Output L L L L Coaxial R R R R Phone Jack Optical Play Rec OUTPUT AUX 2 AUX 1 LINE L SL C L L L G9 S/PDIF DC+12V R SR SW R R R L SL C SR R External Input Amplifier Output _ _ _ _ _ + + + + + Surround Surround Powered Left Center Right Left Right Subwoofer 9
Summary of the content on the page No. 11
Connecting M6 501P (with the Klegg M6 501R Theater System) 10
Summary of the content on the page No. 12
1. After properly connecting M6 501P to your audio sources and amplifier, plug in M6 501P’s AC adapter to an AC outlet. 2. Activate the M6 501P power by pushing the POWER Button on the front panel. Then, turn on the power for all audio sources, amplifier, and/or powered subwoofer. 3. Having completed the installation, get ready to experience true Dolby Digital or DTS surround sound right in your living room. Note: When playing music or movies be sure to have the volume set low initi
Summary of the content on the page No. 13
M6 501P Remote Control 6 DELAY Button 6 9 Select the desired channel to adjust the time Delay. power 2 1 7 BALANCE Button mute Volume settings for all 6 channels. 4 3 balance delay prologic 8 EQ SETUP Button 5 7 field EQ on/off EQ setup Select up to 5 EQ Band Settings* (see page 11). 10 8 preset 1 preset 2 preset 3 9 EQ ON/OFF Button 11 save preset 4 load Activate the selected EQ Band Setting. 13 12 Cen 10 FIELD Button 15 14 SL/SR SW Choose from 6 different sound fields. VOL
Summary of the content on the page No. 14
M6 501P Operation In the following pages we have provided detailed operation explanations to guide you through the proper setup and operation of the M6 501P. As you might have noticed, there is only a POWER ON/OFF button on the front panel. The M6 501P has been purposely designed for user-friendly remote control operation. All functions and settings of the M6 501P are operated from the remote control. M6 501P Operation – LCD and LEDs 1. Press the power button to turn the M6 501P on, p
Summary of the content on the page No. 15
M6 501P Operation – LCD Display Auto Decode Mode (Auto Detect Input Stream Type) When the M6 501P is turned on it automatically detects and differentiates the audio signal coming from source unit. Playing a DVD with Dolby Digital (AC3) encoding will display the following information: D o l b y D i g i t a l C o S U R R O U N D Playing a DVD with DTS encoding will display the following information: D T S C O A X I A L S U R R O U N D Playing a DVD, CD, LD,
Summary of the content on the page No. 16
M6 501P Operation – Input Selection Input Selection The M6 501P can be connected up to 5 audio sources. power mute Select the input source feeding the M6 501P by balance delay prologic repeatedly pressing the INPUT Button on the remote field EQ on/off EQ setup control until the desired setting is reached. preset 1 preset 2 preset 3 In the Digital Mode (Dolby Digital / DTS) you can manually select the digital audio input source from either the coaxial or optical input d
Summary of the content on the page No. 17
M6 501P Operation – Test Mode Test Mode After completing the installation, press the TEST Button on the remote to see if the system functions properly. power You can also use the test mode to test the location of mute the speakers. When the TEST Button is pressed, white balance delay prologic noise is emitted through all the satellite speakers in the EQ on/off EQ setup field order of L, C, R, SL, and SR channels for 2 seconds preset 1 preset 2 preset 3 each. When completed th
Summary of the content on the page No. 18
M6 501P Operation – Mute Mode Mute Mode Pressing MUTE Button on the remote control interrupts all signal outputs (including the G9 and power 6 RCA connectors.) mute balance prologic delay To disable the mute function press MUTE Button field EQ on/off EQ setup again. preset 1 preset 2 preset 3 When the MUTE Button is pressed the M6 501P will display the following information: D o l b y D i g i t a I C o S U R R O U N D M U T E M6 501P Operation – Master Volume Con
Summary of the content on the page No. 19
M6 501P Operation – Balance Setting Balance Balance Button balance delay prologic Users can customize the volume setting of each field EQ on/off EQ setup individual channel. preset 1 preset 2 preset 3 save preset 4 load To select a channel press the BALANCE Button on Cen the remote control. Press this button repeatedly until desired channel is selected. SL/SR SW VOL D Time DRC Adjust volume on selected channel by pressing VOL + or VOL - on the remote control. Example:
Summary of the content on the page No. 20
M6 501P Operation – Delay Calibration SW C TV L R SL SR The ideal listening position is defined below: ?? Center channel speaker should be placed in a position that has an equal distance as the left and right speakers to listener. ?? Surround left and surround right speakers should be placed behind the listener and above listener’s ear level. ?? If speaker placement is restricted due to the physical environment of the room, delay calibration maybe necessary to achieve the ideal list
