Summary of the content on the page No. 1
BT Digital Baby Monitor 250
User Guide
Summary of the content on the page No. 2
Welcome… to your BT Digital Baby Monitor 250 • Digital sound quality with high definition sound TM (Hi-ds ) lets you hear your baby breathe, gurgle, snuffle or cry with complete clarity • Wireless range of up to 300m outdoors and up to 50m indoors (in ideal conditions, where there is a clear line of sight between the units) – giving you the freedom to move around with clear reception and no interference from other baby monitors • Out of range warning • Link light provides continuous confid
Summary of the content on the page No. 3
Got everything? This User Guide provides you with all the • Baby unit information you need to get the most • Parent unit from your BT Digital Baby Monitor 250. • 2 x AA NiMH 1300mAh rechargeable batteries Please read this guide carefully and for Parent unit (pre-installed) keep it for future reference. • Parent unit charger • 2 x power adapters Need help? (item code 057711) If you have any problems setting up or using your • Travel bag (located BT Digital Baby Monitor 250 (or would like
Summary of the content on the page No. 4
4 4 Important safety information • Your BT Digital Baby Monitor 250 is designed to be an aid and should not be used as a substitute for responsible and proper adult supervision. • Make sure the Baby unit, Parent unit and mains adapter cables are kept out of reach of your baby – at least one metre away. • Never place the Baby unit inside your baby’s cot, bed or playpen. • Never cover your Parent or Baby units (e.g. with clothes, towels or blankets). • Never use or place your Parent or Baby unit
Summary of the content on the page No. 5
In this guide 5 Important safety information ............4 Mute All feature – Parent unit only ....20 Mute Low ........................................20 Your BT Digital Baby Monitor 250 ...... 7 Talk Back .........................................21 Parent unit ........................................7 Find ................................................22 Parent unit display icons .....................8 Torch ...............................................22 Parent unit charger ...............
Summary of the content on the page No. 6
6 In this guide Set the feed timer Help ...............................................36 countdown duration ........................28 General information ........................ 38 Start the feed timer countdown ........29 Cleaning ..........................................38 Cancel the feed timer countdown .....29 Guarantee .......................................38 Switch timer repeat option on or off ..30 Product disposal instructions ............39 Select the type of feed timer alert ....
Summary of the content on the page No. 7
Your BT Digital Baby Monitor 250 7 Mute Low Mute All Parent unit (on top of unit) (on top of unit) Power on/off Press to toggle the Press to toggle the (on top of unit) Baby unit microphone Parent unit receive Press and hold to sensitivity between volume between switch the power normal and Mute Low. on and off. on or off. Baby sound level LEDs Indicates the level of received Torch (on back of unit) sound. The LEDs will light up Press to switch the torch feature progressively as the sound
Summary of the content on the page No. 8
8 Your BT Digital Baby Monitor 250 Parent unit display icons Nightlight Music Feed Timer Setup Menu options: Battery status Temperature alert (vibrate on) Feed timer on (vibrate on) Temperature alert (vibrate off) Feed timer on (vibrate off) Nightlight is on Full charge (75-100%) Medium charge (51-74%) Music is playing Low charge (25-50%) Displays the temperature as Empty (8-24%) measured at the Baby unit Flashing (0-7%) Icon will scroll when charging Crying alert (vibrate
Summary of the content on the page No. 9
Your BT Digital Baby Monitor 250 9 Parent unit charger Front Charging light Red when the Parent unit is BT Baby Monitor correctly placed on the charger. Back Power socket For connection to the mains power socket via the power adapter cable supplied. If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
Summary of the content on the page No. 10
10 Your BT Digital Baby Monitor 250 Temperature sensor Baby unit Make sure the sensor is placed with clear space around it and not in contact with any surfaces Nightlight to ensure it works effectively. Press to switch the Microphone Nightlight on or off. Brightness Power on/off Press to adjust the nightlight Press and hold to switch the brightness: high, medium or power on or off. low (once the nightlight has Skip forward been switched on). When music has been Find switched on (see Mu
Summary of the content on the page No. 11
Your BT Digital Baby Monitor 250 11 Back of Baby unit Power socket For connection to the mains power socket via the power adapter cable supplied. If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
Summary of the content on the page No. 12
12 Your BT Digital Baby Monitor 250 Parent unit menu map Turn (On/Off)? High Nightlight Brightness Medium 5 min Low 10 min Timer 15 min Constant (Play/Stop)? 3 Blind Mice Music Choose Song Brahms 5 min Canon in D 10 min Timer Dream Chase 15 min Menu Dreaming Constant Hush Baby (Start/Stop) Timer Night Night Twinkle Star Duration Set Time Play All Feed Timer Repeat On Repeat Repeat Off Beep Alert Beep&Vibe Vibrate Beep Beep&Vibe Crying Alert Vibrate Beep Setup Screen only Beep&Vibe Temp Alert Vib
Summary of the content on the page No. 13
Setting up 13 WARNING! Parent unit Only use the power adapters 1. Plug one of the power adapter cables into the supplied. Using incorrect power adapters may permanently socket marked on the back of the Parent unit damage your product. charger and plug the other end into the mains Battery performance power wall socket and switch the power on. Rechargeable batteries in the Parent unit will last approximately 20 hours in normal use. Please note that new batteries do not reach full capaci
Summary of the content on the page No. 14
14 Setting up The Parent unit rechargeable 3. Place the Parent unit into the charger. The red batteries will lose charge over charging light will illuminate on the charger and a period of time, even if the battery icon will start scrolling on the Parent switched off. unit display to indicate that the batteries are Battery low warning – being charged. Parent unit When the batteries are low – approximately within 1 hour of running out – the Parent unit Low battery indicator will emit a
Summary of the content on the page No. 15
Setting up 15 WARNING Baby unit Never use non-rechargeable 1. Plug the remaining power adapter cable into the batteries in the Parent unit. Only use the recommended socket marked on the back of the Baby unit type – 2 x AA NiMH 1300mAh and plug the other end into the mains power and batteries. Using other types switch on. could permanently damage the unit. Charge the batteries as instructed in this user guide. The Parent unit can still be used when it is in the charger. Removing
Summary of the content on the page No. 16
16 Setting up Positioning your units Once the units are Linked the green Link light on The Baby unit should ideally be the top of the Parent unit and the green LED on within 1m-2m of your baby for the Baby unit will stop flashing and remain a steady best performance. green. The units are now ready to use. If you place the Parent and Important: Baby units too close together The link confirmation between the two units is vital you will hear a high pitched for use so they can communicate.
Summary of the content on the page No. 17
Using your BT Digital Baby Monitor 250 17 Switching on/off Switch the Baby unit on 1. Press and hold the button for 1 second. The nightlight will briefly illuminate and then the green Link indicator will flash until it links with the Parent unit. Once linked the green Link indicator will remain on. Switch the Parent unit on 1. Press and hold the button on the Parent unit until all the LEDs briefly illuminate. The green Link indicator will flash and the display will show I’m Linking. Once
Summary of the content on the page No. 18
18 Using your BT Digital Baby Monitor 250 Switch the Parent unit off 1. Press and hold the button on the Parent unit until an audible alert sounds. The green Link indicator will switch off and the display will go blank. Baby sound level LED indicators LEDs 1-2 = Green LEDs 3-4 = Green LEDs 5-7 = Red (or Amber if Mute Low is on) The seven LEDs across the top of the Parent unit light up to indicate the level of sound being received from the Baby unit. The LEDs light up progressively as the
Summary of the content on the page No. 19
Using your BT Digital Baby Monitor 250 19 If you try and set the volume Adjust the loudspeaker volume higher or lower than the 5 At the Parent unit: settings available on either unit you will hear an error tone. 1. Press or to select the required level. Setting the Parent unit to The first press will show and sound the current Volume off is the equivalent of setting. There are 5 volume levels and off (Mute). switching the Mute All feature The volume level will be heard and shown on t
Summary of the content on the page No. 20
20 Using your BT Digital Baby Monitor 250 Be careful not to accidentally Mute All feature – Parent unit only switch the torch feature on because Mute All is The Mute All feature prevents any sound coming automatically switched on out from the Parent unit loudspeaker. With Mute All when the Torch is switched on. on you can still monitor your baby using the Baby sound level LED indicators (page 18) and the Crying Setting the Parent unit Alert (page 33). loudspeaker volume to 1. To switch
