Summary of the content on the page No. 1
Model # IW12BX
12V DC Electric Impact Wrench
INSTRUCTION MANUAL
Thank you for purchasing this IW12BX Electric Impact Wrench. This manual provides important information on its
proper operation and maintenance. Every effort has been made to ensure the accuracy of this manual. We reserve
the right to change this product at any time without prior notice.
Before use, read carefully and understand all warnings, cautions, instructions and labels. Fail
Summary of the content on the page No. 2
Model IW12BX 12V 1/2" DC Electric Impact Wrench FEATURES: • 150 Ft. lbs. of Torque • 11 Foot Cord Plugs Into Cigarette Lighter • 2 Foot Adapter Cable For Hook-Up Directly To Car Battery • 4 Piece, 1/2" Square Drive Impact Sockets: 11/16", 3/4", 13/16", and 7/8" • Forward & Reverse Modes • Lockable Trigger • LED Light For Night Use • 2 12A-250V Fuses SPECIFICATIONS: • Rated Current <15 AMP • Rated Voltage 120V/60Hz • Blows Per Minute 30-40 BPM • Drive Size 1/2
Summary of the content on the page No. 3
GENERAL SAFETY RULES FOR ALL ELECTRIC POWER TOOLS WARNING: When using this tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment and vehicles. The warnings, cautions and instructions in this manual cannot cover all situations and conditions. The user must exercise common sense. READ ALL INSTRUCTIONS BEFORE USING THIS TOOL! 1) Keep work area clean. Cluttered areas invite injuries. If emergency dictates use of this tool on
Summary of the content on the page No. 4
PACKAGE CONTENTS • 12V DC Electric Impact Wrench • 4 Impact Sockets, Sizes 3/4", 11/16", 7/8", and 13/16" • 2-Foot Adapter Cable For Automobile Battery Hook-Up • 2 Spare 12A-250V Fuses • High Impact Plastic Carrying Case (Not Shown) 2 3 4 COMPONENTS 5 1 11 10 6 9 7 8 1. Anvil 8. 12V Plug-In 2. LED Light 9. Negative Terminal Clamp (Black Handle) 3. Trigger Locking Switch 10. Positive Terminal Clamp (Red Ha
Summary of the content on the page No. 5
OPERATING INSTRUCTIONS WARNING! Gasoline engines create carbon monoxide, an odorless, colorless, tasteless gas that causes headaches, nausea, dizziness and even death if exposure is prolonged. The engine does not have to be running to use this impact wrench. If forced to run the engine, do so in a well-ventilated area. NOTE: The motor in this wrench spins until it reaches maximum speed, then the internal clutch automatically engages and the nut is loosened or tightened. THIS IS NORMAL A
Summary of the content on the page No. 6
Select the appropriate size socket (H) to fit the wheel lug nut. Attach the socket to the impact wrench by pressing it on to the Anvil (I). For best results, use only the sockets that came with this wrench. Be sure the spring-loaded pin (J) on the Anvil lines up with the matching hole on the socket securing the socket firmly to the impact wrench. (Figure 4) NOTE: The motor in this wrench spins until it reaches maximum speed, then the H I J internal clutch automatically eng
Summary of the content on the page No. 7
PARTS LIST Part No. Description Part No. Description 1 Bearing 21 Bolt 2 Anvil Bearing 22 Cable Block 3 Radial Bearing 23 Cable Bushing 4 Anvil 24 12-V Plug-In 5 Oil Bearing 25 Left Housing 6 Ratchet Wheel Base 26 Trigger 7 Wheel 27 LED 8 Wheel Tray 28 Bolt 9 Pull Spring 29 Wheel 10 Wheel Brace 30 Pull Spring 11 Ratchet Wheel Bearing 31 Bolt 12 Pedestal Bearing 32 Bolt 13 Gear 33 Pawl 14 Gear Shaft 34 Rod 15 Drive Wheel 35 7/8” Socket 16 Motor Ge
Summary of the content on the page No. 8
NOTES: Model IW12BX 12V 1/2" DC Electric Impact Wrench 8
