Axor Starck X 10170001 user manual

User manual for the device Axor Starck X 10170001

Device: Axor Starck X 10170001
Category: Indoor Furnishings
Manufacturer: Axor
Size: 2.7 MB
Added : 12/27/2013
Number of pages: 16
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Axor Starck X 10170001. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Axor Starck X 10170001.

For your convenience

If looking through the Axor Starck X 10170001 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Axor Starck X 10170001 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Axor Starck X 10170001 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Axor Starck X 10170001 User manual - Online PDF
Advertisement
« Page 1 of 16 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Axor Starck X 10170001 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Axor Starck X 10170001. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Installation Instructions / Warranty
Starck
Starck
10101XX1
10106XX1
10140XX1
10145XX1
Starck X
10170001
10175001
10180001
10185001

Summary of the content on the page No. 2

Starck Starck 10101XX1/10106XX1 10140XX1/10145XX1 Starck X Starck X 10170001/10175001 10180001/10185001 

Summary of the content on the page No. 3

Starck Starck X 10101XX1/10106XX1/10140XX1/10145XX1 10170001/10175001/10180001/10185001 Do not install this faucet on a sink with a raised lip. ok! no! Technical Information Recommended water pressure 15 - 58 psi Max. water pressure 58 psi o Max. hot water temp. 176 F* o o Recommended hot water temp. 10 F - 140 F* Flow rate 1. gpm Battery CR-P / 6 V Lithium Automatic shutoff after 1 minute *Please know and follow all local plumbing codes when setting the temperature on the water heat

Summary of the content on the page No. 4

Installation notes • Flush the hot and cold supplies thoroughly • The distance between the switch on/off before installing the faucet. Damage to point to the faucet is approx. 6 1/4” - 8” the faucet caused by debris is not covered under normal conditions. The detection under the warranty. area may be less for dark, non-reflective objects, or greater for bright, highly reflec- • The hot and cold supplies should be of tive objects. equal pressure. • If the sink is very small or highly • Th

Summary of the content on the page No. 5

Installation Position the faucet on the sink or countertop (1). Install and tighten the mounting nut (). Tighten the tensioning screws (). Connect the /8” adapters to the stops (4). Connect the hoses to the adapters (5). Tighten the hoses with two wrenches, as shown, to prevent the hoses from twisting. 5

Summary of the content on the page No. 6

Connect the faucet power cable to the battery pack or AC power pack (1). Plug the AC power pack in. Turn the hot and cold supplies on (). Remove the protective film from the sensor window (). Wait 0 seconds before attempting to use the faucet (4). Position your hand in front of the sensor to turn the water on. Due to air in the faucet, the spray pattern may be unattractive for the first 10 - 15 uses after installation or service. Models with manual temperature adjustment only: p

Summary of the content on the page No. 7

Remove the faucet body (1). Turn the temperature screw forward to make the water cooler, backward to make it warmer (). Dry any drops of water from the faucet or mounting surface. Replace the faucet body (1). Replace the screw (). Turn the water supplies on (). Reconnect the power cable (4). Wait 30 seconds (1). Place your hand in front of the faucet to turn it on (). 7

Summary of the content on the page No. 8

Battery Replacement -- models 10101XX1/ 10106XX1/10170001/10175001 only If the LED in the sensor window flashes, the battery is low, but the faucet can still be used. If the LED lights continuously, the battery must be changed before the faucet can be used. Remove the four screws and the battery pack cover. Remove the old battery (1). Install the new battery (). Reinstall the battery pack cover. Wait 30 seconds (1). Activate the faucet by placing a hand in front of the sensor (). 8

Summary of the content on the page No. 9

Clean the aerator and filters -- all models If the water flow is reduced over time, clean the aerator (a) and the filters (b). Turn the water supplies off (1). Disconnect the power cable (). Starck 10101/10106/10140/10145 -- unscrew and remove the aerator (a). Starck X 10170/10175/10180/10185 -- remove the spray former (a), using a  mm Allen wrench to loosen the screws. Do not lose the screws! All models -- disconnect the hot and cold supply hoses from the adapters. Remove the filters

Summary of the content on the page No. 10

Turn the water on (1). Reconnect the power cable (). Wait 30 seconds (1). Place a hand in front of the sensor to turn the faucet on (). 10

Summary of the content on the page No. 11

Cleaning The faucet may be turned off temporarily so that the sink may be cleaned. Cover the sensor window with a hand for approximately 10 seconds. The faucet will turn off for approximately 60 seconds, so that the sink may be cleaned. The LED in the sensor window will flash. When the LED no longer flashes, the faucet may be used normally. 11

Summary of the content on the page No. 12

Change the Spray Former -- Starck X 10170 / 10175 / 10180 / 10185 only The waterfall spray former is installed on the faucet at the fac- tory. A round monospray spray former is included with the faucet. The spray former may be changed easily, if desired. Use a  mm Allen wrench to remove the spray former screws. Remove the old spray former. Install the new spray former. Tighten the screws. 1

Summary of the content on the page No. 13

Reduce the Sensor Range The sensor is set for maximum range at the factory. If the faucet is used on a very small or highly reflective lavatory, the sensor range may be reduced by ap- proximately ”. Disconnect the power cable for approximately 10 seconds (1). Reconnect the power cable (). The LED will blink once to indicate that it is in the “maximum range” mode. When the LED stays on, cover the sensor window with your hand or with a white card for 0 - 40 seconds to reset the electron

Summary of the content on the page No. 14

Replacement Parts 4  6 1 10 5  8  7 1 battery, lithium CR-P / 6V  XX = color  connection hose 880  000  00 = chrome  spray former 8867000  80 = Steel 4 aerator, Starck 4005XX0 5 fixing set 161000  6 electronics, Starck 87  000  electronics, Starck X 884000 7 AC adapter 8 battery box 8801000  Maintenance note: the check valves (item #)   check valve 6456000  should be removed and checked yearly. 10 aerator, Starck X 8610000  14

Summary of the content on the page No. 15

Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning. Cleaning Materials for Faucets and Showers Acids are a necessary ingredient of cleaning materials for removing lime, however please pay attention to the following points when cleaning faucet

Summary of the content on the page No. 16

including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year, with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products. THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, ne


Alternative user manuals
# User manual Category Download
1 Axor 17133001 User manual Indoor Furnishings 1
2 Axor 16506821 User manual Indoor Furnishings 1
3 Axor 16597XXX User manual Indoor Furnishings 0
4 Axor 17133831 User manual Indoor Furnishings 0
5 Axor 17133821 User manual Indoor Furnishings 1
6 Axor 16506XX1 User manual Indoor Furnishings 0
7 Axor 16506001 User manual Indoor Furnishings 0
8 Axor 17010XX1 User manual Indoor Furnishings 0
9 Axor 34316XX1 User manual Indoor Furnishings 1
10 Axor 94008000 User manual Indoor Furnishings 0
11 Axor 96350000 User manual Indoor Furnishings 5
12 Axor 96766000 User manual Indoor Furnishings 0
13 Axor Allegroh 36135XX1 User manual Indoor Furnishings 0
14 Axor 92720000 User manual Indoor Furnishings 1
15 Axor 96765000 User manual Indoor Furnishings 2
16 Sony User manual Indoor Furnishings 1
17 Sony XL-2000K User manual Indoor Furnishings 1
18 Sony SU-32FS2 User manual Indoor Furnishings 3
19 Sony PSS-610 User manual Indoor Furnishings 10
20 Sony HVL-LBP User manual Indoor Furnishings 8