Summary of the content on the page No. 1
Household
Massage Lounger
Sillón de Masaje Doméstico
Operating Instructions
Instrucciones de Uso
Model No./Nº de Modelo EP30007
Before operating this unit, please read these instructions completely.
Antes de utilizar esta unidad, lea compleatamente estas instrucciones y guárdelas para referencia futura.
Summary of the content on the page No. 2
Summary of the content on the page No. 3
INDEX English See pages 1–48 ÍNDICE Español Consulte las páginas S1–S48
Summary of the content on the page No. 4
IMPORTANT SAFETY INSTRUCTIONS Basic precautions should always be followed when using an electrical unit, including the following. Please ensure that you read all instructions before using the Household Massage Lounger. DANGER – To reduce the risk of electric shock: 1. Always unplug this unit from the electrical outlet immediately after using and before cleaning. WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons: 1. Always insert the power plug all the way into th
Summary of the content on the page No. 5
SAFETY PRECAUTIONS CAUTION: To avoid the risk of injury: 1. Persons with any of the conditions listed below or who are undergoing medical treatment or suffer from medical conditions should consult with their physicians before using the unit: a) Pregnant women, people who are ill, in poor physical shape. b) People suffering from back, neck, shoulder, or hip pain. c) People who have a pacemaker, defibrillator, or other personal medical devices prone to electronic interference. d) People sufferin
Summary of the content on the page No. 6
OPERATING PRECAUTIONS WARNING: To avoid damaging the chair, follow these precautions: 1. The chair is designed for a maximum user weight of 264 lbs (120 kg). Exceeding the maximum weight may cause permanent damage to the massage mechanism and/or other components of the unit. Any such damage is deemed to be user abuse and is not covered under the Limited Warranty. 2. Do not sit on or drop the control panel. Do not pull the control panel cord or the power cord. Be careful not to catch the cord
Summary of the content on the page No. 7
GROUNDING INSTRUCTIONS This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER Improper connection of the equipment-grounding
Summary of the content on the page No. 8
Part names and functions Main unit Front 3 4 5 6 7 8 9 2 10 11 12 13 14 Legrest Seat/Thigh Side Massage section Hand/Arm massage section 1 5 12 • Includes integrated air massage Leg/Sole massage section 2 function • Includes air massage function Control Panel Stand Covers 13 • On both the left and right sides Outer Shoulder massage section 14 • Includes integrated air massage Seat/Thigh Soft Massage Plates function (integrated) • Position adjustment possible Sole Reflexology Plates Retra
Summary of the content on the page No. 9
Back 15 16 17 18 13 19 20 21 22 23 Back Cover Power Supply Box 15 23 Control Panel Holder 16 Lock Switch Power Switch Child Safety Decal 17 Control Panel Stand 18 Power Plug 19 Power Cord 20 Safety Precaution Label 21 Wheels 22 Lock Switch Key Lock Switch Key Tag • For preventing children from swallowing it by accident 6
Summary of the content on the page No. 10
Control Panel Cover closed 13 Cover open 14 15 17 16 Off/On Voice Guidance Volume Stretch 1 8 14 • See page 37 • See page 34 Quick Stop 2 • Press this button to stop the Ultra Knead Air Massage Controls 9 15 massage immediately. • “Ultra Knead” is the name of the • Selection of the areas to be air massage actions. massaged User Memory 3 • See page 26 to 27 • See page 30 • See page 39 to 41 Repeat Self-Program/Manual Operation 10 16 Program Selection 4 • See page 27 Controls • See page 18
Summary of the content on the page No. 11
Display * This illustration simulates when all lights are illuminated. Voice Guidance Volume Display Pressure Display Massa ge Area Display 1 5 11 • See page 37 • Displays the pressure applied by • Flashes to indicate areas the massage heads currently being massaged Off • In the Massage Area Display, Massage Style Display 6 positions are estimated. • Displays the current massage Soft Therefore, there may be some style differences between the actual Medium sensation and the display. Thumb
Summary of the content on the page No. 12
Setting up the massage lounger Where to use the unit Keep at least 4" (10 cm) away from the wall. 1 Ensure there is adequate space to recline. Caution Approx. 77" (195 cm) • Do not use the unit in areas with high humidity, Width approx. 33" (84 cm) such as the bathroom, because this can lead to Approx. 12" (30 cm) electric shock or other accidents. • Place the unit on a totally flat surface. Approx. 14" Failure to do so may result in the unit tipping over. (35 cm) • Do not expose the massag
Summary of the content on the page No. 13
Confirm that the main unit and the accessories are in the box. Main unit Width: Approx. 27" (68 cm) Height: Approx. 26" (66 cm) Length: Approx. 63" (160 cm) Accessories • Control Panel Stand • Pillow • Armrests (Right/Left) Control panel holder Fixing screw Left/Right indication Clip • Control Panel Stand Covers Air plug Small holes on the inside fabric are an intentional part of the functional design. • Sole Reflexology Plates • Shoulder Plates • Allen Key — 1 (Cross-section) This is installe
Summary of the content on the page No. 14
Assembly Attaching the Armrest Groove 1 armrests (On both the right and left sides) 1. Insert the armrest into the unit. • Be careful to avoid pinching (2) Fasten the armrest with your fingers. (1) Align the the attachment screws. Right/Left position Main unit indication Pipe 2. Fasten the armrest with the Attachment Attachment Turn screws attachment screws. Screw Screw clockwise to tighten. Set the two attachment screws in place by hand first and then tighten firmly with the all
Summary of the content on the page No. 15
Attaching the control panel stand to the right or left side panel of the unit 3 (Diagram shows attachment to right armrest.) 1. Insert the attachment screw into the lower hole first The position of the control panel when seated can be and then tighten lightly by hand. selected by choosing the appropriate hole for the screw. 2. Securing the stand with the attachment screws. Approx. Near Tighten the two screws for the remaining two holes 20˚ lightly by hand and then tighten firmly with the al
Summary of the content on the page No. 16
When removing the control panel stand cover 1. Insert the head of a flat-tip screwdriver in the gap Gap under the mark (O). 2. Push the bottom tab of the cover up to lift the cover. 3. Perform the same procedures as 1 and 2 above for the other gap. 4. Pull the cover up diagonally. 2 Flat-tip screwdriver • Performing this procedure with the allen key or a (Not included in Phillips screwdriver could damage the unit. the standard configuration) 1 2 Raising the backrest to the 5 upright posit
Summary of the content on the page No. 17
Moving the control panel cord to the left side (when control panel stand is on left side) Legrest 1. Press the button on the control panel to turn on the power. 2. Press the button on the control panel and hold until the legrest has risen far as it will go. Continue pressing until a “beep-beep-beep” sound is heard. 3. Remove the control panel cord from the cord-holder groove. 4. Move the control panel cord under the legrest to the left side. 5. Fasten the control panel cord at two points in
Summary of the content on the page No. 18
2. Fasten the control panel cord using the clip. Lift the control panel to remove. Clip Fasten the cord so that the portion under the clip is Control panel cord not slack. Inserting the shoulder plate 7 1. Insert the plate into the pocket on the outer shoulder 2. Slide the inserted plate for the outer shoulder to the massage unit. inside (recommended position). • Grasp the pocket and pull it slightly to expand the • The up/down and in/out positions of the plate can be opening, so that the pl
Summary of the content on the page No. 19
Before sitting down Check the following before using the unit Check the surrounding area 1 Make sure there are no objects, people, or pets in the vicinity of the unit. Check the power cord and the power plug 2 Warning • Remove dust from the power plug periodically. Failure to observe this precaution may result in Check defective insulation of the cord due to moisture. Clean dust from the cord using a dry cloth. • Do not damage the power cord and the power plug. (Do not damage, expose to hea
Summary of the content on the page No. 20
2. Make sure there is no foreign objects on Outer shoulder massage the chair. section Caution • Sit on the unit after confirming there is no foreign matter between the parts of Hand/Arm the unit. (Check for foreign objects on massage section the backrest, leg/sole massage section, hand/arm massage section, seat/thigh side massage section, or the outer shoulder massage section.) Seat/Thigh side Failure to observe this precaution may result massage section in accident or injury. Leg/So
