Summary of the content on the page No. 1
®
Household
Massage Lounger
Sillón de Masaje Doméstico
Operating Instructions
Instrucciones de Uso
Model/Modelo No. EP3222
Before operating this unit, please read these instructions completely, and save for future reference.
Antes de utilizar esta unidad, lea completamente estas instrucciones y guárdelas para referencia futura.
Summary of the content on the page No. 2
INDEX English See pages 1- 38 INDICE Español Ver página S1- S38
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS Basic precautions should always be followed when using an electrical unit, including the following. Please ensure that you read all instructions before using the Household Massage Lounger. DANGER – To reduce the risk of electric shock: 1. Always unplug the unit immediately after use. 2. Always unplug the unit before cleaning. WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons: 1. Always insert the power plug all the way into the
Summary of the content on the page No. 4
SAFETY PRECAUTIONS WARNING: To avoid the risk of injury: 1. Persons with any of the conditions listed below or who are undergoing medical treatment should consult with their physicians before using the unit: a) Pregnant women, people who are ill, in poor physical shape. b) People suffering from back, neck, shoulder, or hip pain. c) People who have a pacemaker, defibrillator, or other personal medical devices prone to electronic interference. d) People suffering from heart disease. e) People w
Summary of the content on the page No. 5
OPERATING PRECAUTIONS WARNING: To avoid damaging the chair, follow these precautions: 1. The chair is designed for a maximum user weight of 264 lbs (120 kg). Exceeding the maximum weight may cause permanent damage to the massage mechanism and/or other components of the unit. Any such damage is deemed to be user abuse and is not covered under the Limited Warranty. 2. Do not sit on or drop the control panel. Do not pull the control panel cord or the power cord. Be careful not to catch
Summary of the content on the page No. 6
GROUNDING INSTRUCTIONS This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER Improper connection of the equipment-grounding
Summary of the content on the page No. 7
PART NAMES AND FUNCTIONS MASSAGE LOUNGER Front Control Panel Stand Pillow Seat/Thigh Side Airbag Back Cushion Caution Label Backrest • Retracted position of massage heads Armrest Shiatsu Point in Hip Massage • Sliding up/down possible. Side Cover Legrest Slide Lever • Extendable length of 9 in. (22 cm). Seat • Includes integrated air massage Legrest function. • Includes integrated air massage function. Back Back Cushion Zipper Pillow Fastener Back Cover Handle Child Safety Decal Safety Pr
Summary of the content on the page No. 8
CONTROL PANEL Cover Closed (Massage Programs Use) OFF/ON button Program Selection buttons Ottoman button • Use this button to turn the • Use these buttons to select one • Use this button to adjust control panel power on and of four pre-program massages or the angle of the legrest. off. the quick or self program massage. (See Page 13) Quick Stop button off/on pre-programs ottoman reclining • Press this button to stop Reclining button the massage immediately. • Use this button to adjust shiats
Summary of the content on the page No. 9
DISPLAY Focus and Repeat Roller Position Time Remaining Display User Memory Display Massage Area Display Display Adjustment Display • Displays time remaining • Uses animation to indicate • Flashes to indicate areas • Flashes when the Focus • Lights up when the before the end of a massage when data is being currently being massaged. button has been pressed to massage position is in minutes. recorded to or recalled from (See “Additional repeat a massage action. adjusted during a massage. • “O
Summary of the content on the page No. 10
BEFORE USING THE UNIT SETTING UP THE MASSAGE LOUNGER After Removing Everything from the Box, You Should Have the Following Massage Lounger Accessories Control Panel Stand Pillow Clip Armrests Marks indicating left and right can be found Attachment Screws (M6#16) — 6 on the underside of each armrest. Left Armrest — 3 Front Back Right Armrest — 3 Control Panel Stand Attachment Screws (M6#10) — 4 Allen Key — 1 (Cross-section) 0.2" (4 mm) Small holes on the inside fabric are an intentional part o
Summary of the content on the page No. 11
ASSEMBLY Attaching the Armrests (On Both Right and Left Sides) Use the mark as 1. Insert the armrest into the unit. a guide for insertion. • Markings indicating left-hand and right-hand 1 1 sides can be found on the inside surface of each armrest. • Make sure the control panel cord does not become pinched when fitting the right armrest onto the unit. Turn screws clockwise 2. Fasten the armrest with the to tighten. attachment screws. • Set the three attachment screws in place first
Summary of the content on the page No. 12
Attaching the Control Panel Stand Covers (On Both Right and Left Sides) Cover for Side WITH Control Panel Stand Cover for Side WITHOUT Control Panel Stand Top Tabs The method of attaching the covers is the same for both sides. • Diagram shows side attached with control panel stand. Bottom Tabs 1. Insert the bottom tabs on the cover 12 into the notches on the armrest. 2. Insert the top tabs on the cover Notches into the notches on the armrest. When Removing the Control Panel Stand Cover
Summary of the content on the page No. 13
Raising the Backrest to the Upright Position 1. Insert the power plug into the power outlet. 1 2. Insert the key and turn the key lock to the “open” position. 3. Slide the power switch to the “on” position. 4. Press on the control panel twice. 2 3 • The backrest will rise to the upright position automatically. Moving the Control Panel Cord to the Left Side (When Control Panel Stand is on Left Side) 1. Press on the control panel to turn on the power. ottoman 2. Press
Summary of the content on the page No. 14
BEFORE SITTING DOWN Please Check the Following Before Using the Unit Check the Surrounding Area (1) Check that there is nothing around the unit. (2) Check that there is enough room (15.7 in. (40 cm)) to recline the unit. Lower the Legrest Prior to Sitting Down • Do not sit down when the legrest is raised. Doing so may result in injury due to the chair tipping over. To lower the legrest… Pull the legrest slide lever, make sure the legrest is fully retracted, then press twice to return the
Summary of the content on the page No. 15
ADJUSTING THE SEAT Adjusting the Reclining Angle Approx. 120° 1. Press to turn on the power. ottoman reclining 2. Press or to adjust the Approx. angle of the backrest and/or 85° legrest. ottoman reclining • Movement will continue until a “beep- beep-beep” sound is heard if the buttons are held down. • The legrest will start to move shortly after the backrest. • During a lower body massage, the legrest cannot be positioned at a level lower than that of the correct mas
Summary of the content on the page No. 16
ADJUSTING THE VOICE GUIDANCE VOLUME AND THE CONTROL PANEL STAND Adjusting the Voice Guidance Volume Press Press Default Setting Press “off” “1”= Low “2”= Medium “3”= High The single beep (when a button is pressed) and the triple beep (when the adjustable setting limit is reached) are still audible. Adjusting the Control Panel Stand The arm section bends to allow The control panel can also be rotated positioning towards the front or sideways or tilted backwards when in the rear. the control p
Summary of the content on the page No. 17
USING THE MASSAGE LOUNGER USING THE PRE-PROGRAM AND QUICK MASSAGES – Basic Usage Recommended when you want a complete massage. 2 1 pre-programs ottoman reclining off/on shiatsu deep swedish stretch quick self program time remaining self program voice user intensity intensity speed time lower body upper body open open self program time input leg stretch manual controls intensity neck / back focus off/on lower upper roller position body body Leg Stretch OFF/ON Program Strength Roller Position bu
Summary of the content on the page No. 18
2. Press one of the flashing buttons ( , , , or ) to select a program. • The body scanning will commence when the • The unit will automatically recline program is selected. (See Page 35) to the correct massage position. • The body height range that can be properly detected by the body scanning is between approximately 4.6 and 6.1 ft. (140 and 185 cm). Sit as far back in the seat as possible with Correct Massage Position your head on the pillow. Reclined approxi
Summary of the content on the page No. 19
4. Adjust the length of the legrest when the backs of your calves or knees are not resting in the legrest wells. Pull the legrest slide lever to adjust the length of the legrest. (See Page 13) 5. When the massage is finished the unit will automatically shut off. and last approximately 15 minutes. lasts approximately 5 minutes. The unit will remain in the reclining position of the massage when it shuts off. Press twice to return the backrest and leg
Summary of the content on the page No. 20
USING THE PRE-PROGRAM AND QUICK MASSAGES – Adjusting to Your Preference Adjusting Massage Strength Strength 0 123 intensity Levels (No massage) lower upper body body Upper body intensity speed intensity speed intensity speed Press to adjust. upper body upper body upper body Lower body • Lower body massage will stop when intensity intensity intensity intensity set to zero. lower body lower body lower body lower body Turning Leg Stretch Function Off and On During a Program leg stretch The display
