Philips iColor Cove QLX user manual

Summary of the content on the page No. 1

Installation Guide
iColor Cove QLX
CK INTELLIGENT SERIES Preliminary
®
iColor Cove QLX is a compact linear fixture that generates saturated color
and dynamic effects in alcoves, accent areas, and other interior spaces. The
fixture is available with a wide (120º x 120º) or medium (100º x 40º) beam. An
integrated rotating bracket and optional mounting track provide precise
positioning, and end-to-end connections ensure a simple installation.
• Integral mounting bracket with 180º rotation
• 5

Summary of the content on the page No. 2

2 iColor Cove QLX Installation Guide Scope Of This Guide 1. Start Here! This Installation Guide contains important information on planning and Before you begin the installation, read all of this installation guide. installing your new iColor Cove QLX fixture to ensure peak perfor- iColor Cove QLX fixtures are low-voltage fixtures that require a pow- mance. Read it carefully and save it for future reference. This docu- er supply and a controller to be fully functional. ment should never be cons

Summary of the content on the page No. 3

Scope Of This Guide 3 3. Assemble Additional Items OK To wire and mount an iColor Cove QLX fixture, you may need addi- tional parts and tools. Power Supplies and Wiring Install all power supplies, including any interfaces with controllers, before installing the iColor Cove QLX fixtures. One iColor Cove QLX leader cable is required to connect each run or series of fixtures to a power supply port. (The power supply and external controllers send control signals to the iColor Cove QLX fixtures o

Summary of the content on the page No. 4

4 iColor Cove QLX Installation Guide Figure 2: iColor Cove QLX Wiring This illustration shows the power supply receiving line power and control data inputs and dispatching both power and data through a lead- er cable to the first fixture in a run. Note the terminator location, in the last fixture of the run. 8. Address Fixtures With the Power Supply To power up the fixtures, each one needs to be assigned a unique addressed by the power supply. The exact method used to address iColor Cove QLX

Summary of the content on the page No. 5

5 iColor Cove QLX Specifications Specifications are subject to change without notice. 6-Inch Fixture 12-Inch Fixture Length 6 inches (15.2 cm) 12 inches (30.5 cm) Width 1.25 inches (3.2 cm) (tube diameter) Height 1.37 inches (3.5 cm) Weight 3 oz. (85 g) 5 oz. (142 g) LEDs Per Fixture 5 each: red, green, and blue 10 each: red, green, and blue Total Output (lumens) TBD Wide (120º x 120º) beam angle: 49.8 Medium (100º x 40º) beam angle: 46.1 Efficacy (Lm/W) TBD White > 15 Source High-brightness LE

Summary of the content on the page No. 6

iColor Cove QLX Installation Guide This product is protected by one or more of the following U.S. patents and their foreign counterparts: 6,016,038, Philips Solid-State Lighting Solutions 6,150,774, 6,292,901, 6,340,868, 6,636,003, 6,777,891, 6,969,954, 6,975,079, 7,038,399, 7,161,313, 7,186,003, 3 Burlington Woods Drive 7,202,613, 7,221,104, and 7,233,115. Other patents pending. Burlington, MA USA 01803 Copyright © 2008 Philips Solid-State Lighting Solutions All rights reserved. Toll Free: