Philips UHP PHI/378 user manual

Summary of the content on the page No. 1

Specification sheet UHP Replacement Lamps

Philips UHP 100W/120W 1.0 E23

1. Specifications

• Customer part#:…………………PHI/378
• Lamp Application:………………..RP-TV
• Reflector type:…………………...Elliptical E23
• Arc gap:………………………….1.0 mm
• Power:…………………………...100W/120W
• Ignition voltage:………………….Ignition voltage 20kV ± 5kV
• Light output typical * :…………..4100 lumen (in 120W mode)
• Average Life time ** :…………...> 6000 hrs
• Environmental:…………………...RoHS and WEEE compliant




Side an

Summary of the content on the page No. 2

Specification sheet UHP Replacement Lamps 2. SAFETY - SPECIFIC ATTENTION IS REQUIRED FOR UHP LAMPS UHP lamps are designed and produced as a (spare) part of projection devices, manufactured by OEM’s worldwide and sold worldwide. This type of discharge lamp contains mercury. In operation, the UHP lamp gets extremely hot and develops a very high internal pressure. In case of bulb rupture, the safety of the application is to be secured by adequate shielding of the lamp in order to avoi

Summary of the content on the page No. 3

Specification sheet UHP Replacement Lamps The front glass of the lamp should not make direct contact with metal. Also direct airflow towards the front glass should be avoided. Fast switching cycles will reduce lamp life (e.g. 10min on 10min off). 4. PROCEDURE FOR DISPOSAL OF LAMPS If lamps are broken, ventilate area where breakage occurred. A mercury vacuum cleaner or other suitable means should be used to clean up to avoid dust and mercury vapour generation. Take usual preca