Walker Edison 42" Black Glass TV Stand V42Y79B user manual

Summary of the content on the page No. 1

Item #: V42Y79
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 11/2010

Summary of the content on the page No. 2

Parts List

Summary of the content on the page No. 3

Hardware List

Summary of the content on the page No. 4

Carefully lay glass (1) upside down on a soft surface. Screw long rods (A) and short rods (B) into the appropriate metal plates of glass (1). Slide cylinders (4) onto long rods (A). Slide decorative rings (D) onto long rods (A) and snap onto cylinders (4).

Summary of the content on the page No. 5

Carefully slide glass (2) into place using long rods (A) as guides. Slide decorative rings (D) onto long rods (A). Slide cylinders (3) onto long rods (A). Cylinders (3) will fit snuggly into the decorative rings placed in the previous step. Slide decorative rings (D) onto long rods (A) and snap onto cylinders (3).

Summary of the content on the page No. 6

Carefully slide glass (2) into place using long rods (A) as guides. Slide decorative rings (D) onto long rods (A). Screw cylinders (5) onto long rods (A). Cylinders (5) will fit snuggly into the decorative rings placed in the previous step.

Summary of the content on the page No. 7

Insert caps (E) into cylinders (5). Note that caps (E) may be pre-inserted into cylinders (5). To attach cable management system (6) to the stand, place appropriate holes of cable management system (6) over short rods (B). Screw cap nuts (C) onto short rods (B) and tighten with wrench (F).

Summary of the content on the page No. 8