Summary of the content on the page No. 1
Owner’s Manual
Guide d’utilisation
Manual del Usuario
Indoor Lighting Fixture
Installation Instructions
Instructions d'installation
Appareil d'éclairage pour utilisation intérieure
Instrucciones para la insalación
de la lámpara para interiores
W-366
120112
Please write model number here for future reference: / Veuillez noter le numéro de
modèle aux fins de référence ultérieure: / Por favor, incluya el número del modelo aquí
para futura referencia:
Summary of the content on the page No. 2
ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHT FIXTURE Congratulations on your Westinghouse purchase. This fixture has been designed to give you many years of beauty and service. For questions and comments, please visit www.westinghouselighting. com/contact-us. NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any packing materials (see figure 1). WARRANTY INFORMATION This Westinghouse Lighting Fixture is warranted against defects in material and workmanshi
Summary of the content on the page No. 3
GROUND FIGURE 1. *OUTLET WIRE BOX (B) WIRE CONNECTORS (O) SIDE HOLE (Q) MOUNTING BAR (A) *OUTLET BOX LOCK WASHER (F) SCREWS (C) HEX NUT (D) NIPPLE 1 (G1) GREEN SCREW COLLAR (M) GROUNDING SCREW (P) CANOPY (N) SCREW COLLAR RING (L) CHAIN (K) FIXTURE LOOP (I) RETAINING NIPPLE 2 (G2) RING (T) COLUMN (J) SHADE (R) SOCKET COUPLING (H) ASSEMBLY (S) FIXTURE BASE (Y) NIPPLE 3 (G3) HRX NUT (X) DECORATIVE CAP (V) FINIAL (U) Line art shown may not exactly match the fixture enclosed. *NOT SUPPLIE
Summary of the content on the page No. 4
CHANDELIER MOUNTING AND WIRING INSTRUCTIONS NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fix- tures meet all UL specifications. 1. Turn off power at circuit box to avoid possible electric shock. 2. Secure mounting bar (A) to outlet box (B) with outlet box screws (C) (not included) (see fig. 1). 3. Thread hex nut (D) onto nipple 1 (G1) approximately 1/4 inch and insert lock washer (F), then thread nipple 1 (G1) onto mount
Summary of the content on the page No. 5
GROUND FIGURE 1. *OUTLET WIRE BOX (B) WIRE CONNECTORS (O) SIDE HOLE (Q) MOUNTING SCREWS (D) MOUNTING BAR (A) *OUTLET BOX SCREWS (C) GREEN GROUNDING CANOPY (G) SCREW (P) CAP NUT (I) COUPLING (F) NIPPLE 1 (G1) STEMS (E) RETAINING NIPPLE 2 (G2) CAP (M) RING (T) COLUMN (J) SHADE (R) SOCKET COUPLING (H) ASSEMBLY (S) FIXTURE NIPPLE 3 (G3) BASE (Y) NUT (X) DECORATIVE CAP (V) FINIAL (U) Line art shown may not exactly match the fixture enclosed. *NOT SUPPLIED However, the installation instru
Summary of the content on the page No. 6
SEMI-FLUSH MOUNTING AND WIRING INSTRUCTIONS NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications. 1. Turn off power at circuit box to avoid possible electric shock. 2. Thread mounting screws (D) into cross bar (A) approximately 1/4 inch (see fig. 1). 3. Secure cross bar (A) to outlet box (B) with outlet box screws (C). 4. Slide column (J) and cap (M) down over nipple 2 (G2). 5. Thread nipple 2 (G2
Summary of the content on the page No. 7
LES INSTRUCTIONS D'ASSEMBLAGE DE L'APPAREIL D'ÉCLAIRAGE POUR UTILISATION INTÉRIEURE Félicitations ! Vous avez acheté un produit de Westinghouse Lighting. Cet appareil d'éclairage a été conçu pour durer de nombreuses années. Si vous avez des questions ou des commentaires à nous communiquer, veuillez visiter www.westinghouselighting.com/contact-us. NOTA : Déballez soigneusement l'appareil d'éclairage et les pièces. Assurez-vous que toutes les pièces y sont avant de mettre l’emballage au rebut (
Summary of the content on the page No. 8
*BOITE DE SORTIE FIL DE MISE FIGURE 1. DE COURANT (B) A LA TERRE CONNECTEURS DE FIL (O) TROU LATERAL (Q) BARRE TRANSVERSALE (A) RONDELLE DE BLOCAGE (F) *VIS DE LA BOITE DE SORTIE DE COURANT (C) L’ECROU HEXAGONAL(D) MANCHON FILETE 1(G1) COLLIER FILETE(M) VIS DE MISE A LA TERRE (VERTE) (P) CHAPEAU (N) LA BAGUE DU COLLIER FILETE (L) CHAINE (K) LA BOUCLE DE L’APPAREIL D’ECLAIRAGE (I) LA BAGUE DE MANCHON RETENTION (T) FILETE 2 (G2) COLUMN (J) ABAT-JOUR (R) DOUILLE (S) RACCORD (H) BASE INFE
Summary of the content on the page No. 9
MONTAGE DU LUSTRE ET INSTRUCTIONS DE CÂBLAGE NOTE: Underwriters Laboratories (UL) n’exige pas que tous les appareils d’éclairage comportent des fils de mise à la terre. Ces appareils satisfont cependant à toutes les spécifications UL. 1. Mettez l’interrupteur de la boîte de fusibles à « OFF » afin d’éviter le risque d’électrocution. 2. Attachez la barre de fixation (A) à la boîte de sortie de courant (B) à l'aide des vis de la boîte de sortie de courant (C) (non fournies) (voir fig.
Summary of the content on the page No. 10
FIL DE MISE *BOITE DE SORTIE FIGURE 1. A LA TERRE DE COURANT (B) CONNECTEURS DE FIL (O) TROU LATERAL (Q) MOUNTING SCREWS (D) BARRE TRANSVERSALE (A) *VIS DE LA BOITE DE SORTIE DE COURANT (C) VIS DE MISE A LA TERRE CHAPEAU (G) (VERTE) (P) CAP NUT (I) RACCORD (F) MANCHON FILETE 1(G1) TIGE (E) MANCHON FILETE 2 (G2) RETAINING CAPUCHON (M) RING (T) COLUMN (J) ABAT-JOUR (R) DOUILLE (S) RACCORD (H) BASE INFERIEUR DE L’APPAREIL ANCHON D’ECLAIRAGE (Y) FILETE 3 (G3) L’ECROU HEXAGONA (X) CAPUCHO
Summary of the content on the page No. 11
FIXATION SEMI-ENCASTRÉE ET INSTRUCTIONS DE CÂBLAGE NOTA : Underwriters Laboratories (UL) n’exige pas que tous les appareils d’éclairage comportent des fils de mise à la terre. Ces appareils satisfont cependant à toutes les spécifications UL. NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures 1. Mettez l’interrupteur de la boîte de fusibles à « OFF » afin d’éviter le risque d’électrocution. meet all UL specifications. 2. Vissez les vis d
Summary of the content on the page No. 12
INSTRUCCIONES DE MONTAJE PARA EL ARTEFACTO DE ILUMINACIÓN PARA INTERIORES Le felicitamos por comprar este producto de Westinghouse Lighting. Este producto ha sido dis- eñado para brindarle muchos años de belleza y servicio. Si tiene preguntas y comentarios, visite por favor www.westinghouselighting.com/contact-us. NOTA: Extraiga cuidadosamente el artefacto y las piezas. Verifique que contenga todas las partes requeridas (consulte la figura 1) antes de descartar los materiales de empaque. GARA
Summary of the content on the page No. 13
CABLE DE FIGURA 1. *CAJA DE TIERRA EMBUTIR (B) CONECTORES DE ROSCA (O) ORIFICIO LATERAL (Q) TORNILLOS ARANDELA DE DE MONTAJE (A) PRESION (F) *TORNILLOS CAJA TUERCA DE EMBUTIR (C) HEXAGONAL (D) NIPLE 1 (G1) COLLAR TORNILLO ROSCADO (M) VERDE DE TIERRA (P) DOSEL (N) ENROSQUE EL ANILLO DEL COLLAR ROSCADO (L) CADENA (K) FIJELO AL ASA DEL ARTEFACTO (I) ANILLO DE NIPLE 2 (G2) SUJECION (T) COLUMNA (J) PANTALLA (R) SOPORTE (S) ACOPLAMIENTO (H) BASE INFERIOR DEL ARTEFACTO (Y) NIPLE 3 (G3) TUERCA
Summary of the content on the page No. 14
MONTAJE DEL CANDELABRO E INSTRUCCIONES DE CABLEADO NOTA: Underwriters Laboratories (U.L.) no requiere que todos los artefactos tengan cables de tierra. Estos artefactos cumplen con todas las especificaciones U.L. 1. Desconecte el suministro eléctrico en la caja de fusibles para evitar la posibilidad de des carga eléctrica. 2. Fije la barra de montaje (A) a la caja de embutir (B) con los tornillos correspondientes (C) (no incluidos) (vea la Fig. 1). 3. Enros
Summary of the content on the page No. 15
CABLE DE *CAJA DE FIGURE 1. TIERRA EMBUTIR (B) CONECTORES DE ROSCA (O) ORIFICIO LATERAL (Q) MOUNTING SCREWS (D) TORNILLOS DE MONTAJE (A) *TORNILLOS CAJA DE EMBUTIR (C) TORNILLO DOSEL (G) VERDE DE TIERRA (P) TUERCAS ACOPLAMIENTO (F) TAPA (I) NIPLE 1 (G1) BARRA (E) ANILLO DE NIPLE 2 (G2) TAPA (M) SUJECION (T) COLUMNA (J) PANTALLA (R) SOPORTE (S) ACOPLAMIENTO (H) BASE INFERIOR DEL ARTEFACTO (Y) NIPLE 3 (G3) TUERCA HEXAGONAL (X) TAPA DECORATIVA (V) FLORON (U) Los dibujos pueden no coincidi
Summary of the content on the page No. 16
INSTALACIÓN CASI AL RAS E INSTRUCCIONES DE CABLEADO NOTA: Underwriters Laboratories (U.L.) no requiere que todos los artefactos tengan cables de tierra. Estos artefactos cumplen con todas las especificaciones U.L. NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures 1. Desconecte el suministro eléctrico en la caja de fusibles para evitar la posibilidad de meet all UL specifications. descarga eléctrica. 1. Turn off power at circuit b
Summary of the content on the page No. 17
FIGURE 2. CONNECT TO BLACK CONNECT TO WHITE GROUP A: GROUP B: WARNING HOUSE WIRE HOUSE WIRE BLACK WHITE Turn off electricity to the mounting site before WHITE OR GREY WITH TRACER WHITE OR GREY WITHOUT TRACER beginning installation. Mounting instructions BROWN, GOLD OR BLACK BROWN, GOLD OR BLACK WITH TRACER must be followed exactly WITHOUT TRACER as shown for the fixture to be safely supported. NOTE: When parallel wire (SPT I & SPT II) is used; the neutral wire is square shaped and ridged,
Summary of the content on the page No. 18
CLEANING AND CARE To clean, wipe fixture with soft cloth. Clean glass with mild soap. Spray from chemical cleaners can discolor the finish of fixture. Extend-A-Finish Laquer Conditioner, Item#70295, is recommended once a year to clean, condition, and protect fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture. NOTE FOR FIXTURES THAT ARE SOLID BRASS: Your hand-crafted, solid brass lighting fixture has been coated with a durable, baked-on acryli
