Sanus Systems Accurate Furniture AFV48 user manual

Summary of the content on the page No. 1

Step 5: Add 7” Pillars
Thread a 7” Pillar (g) onto each exposed Shelf Connector (a). Place a Grommet (d) in each wire management hole in the Bottom and
Middle Shelf (k). See Diagram 5 for assistance.
Diagram 5
Assembly Instructions for Model: AFV48
Thank you for choosing Accurate Furniture from Sanus Systems!
g
Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified

contractor or contact S

Summary of the content on the page No. 2

Step 1: Foot Assembly Step 3: Add 9” Pillars Thread a Foot (c) into each 3” Pillar (h) until tight. Thread a Shelf Connector (a) into the other end of the 3” Pillar until tight. Repeat the Thread a 9” Pillar (i) onto each exposed Shelf Connector (a) until tight. Once the 9” Pillars are hand tight, thread a Shelf Connector process for each remaining 3” Pillar. See Diagram 1 for assistance. into the top of the four 9” Pillars. See Diagram 3 for assistance. Diagram 1 Diagram 3 a