Summary of the content on the page No. 1
PLANET VIP-110/VIP-210 Web Configuration Guide
Internet Telephony Gateway
User’s manual
VIP-110/VIP-210
release 1.0
February 10, 2004
Summary of the content on the page No. 2
PLANET VIP-110/VIP-210 Web Configuration Guide Copyright Copyright (C) 2004 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User ’s Manual and all accompanying hardware, software, and documentation are copyrighted. No part of this User’s Manual may be copied, photocopied, reproduced, translated, or redu
Summary of the content on the page No. 3
PLANET VIP-110/VIP-210 Web Configuration Guide Introduction………………………………………………………………………………………..1 VIP-110/VIP-210 Features..............................................................................2 Package Content ...........................................................................................3 Physical Details.............................................................................................3 LED Display & Button...................................................
Summary of the content on the page No. 4
PLANET VIP-110/VIP-210 Web Configuration Guide Introduction Overview In the past, real-time voice communication can only be performed on the PSTN. With the growth of Internet technology, Internet telephony service plays and turns into a cost-effective and highly reliable substitution system of the old-time traditional PBX system. PLANET VoIP (Voice over IP) system – VIP-110/VIP-210 offers toll quality voice and real-time fax data over IP networks. With optimized H323 archit
Summary of the content on the page No. 5
PLANET VIP-110/VIP-210 Web Configuration Guide VIP-110/VIP-210 Features o Standards compliant & excellent voice quality The PLANET VIP-110/VIP-210 is H.323 standard version 3 compliant (including H.323 fast-start mode). The VIP-110/VIP-210 is interoperable with 3rd party voice gateways as well as other PLANET VoIP products. Retaining the tradition of excellence in PLANET VoIP products, the VIP-110/VIP-210 can prioritize voice packets using IP precedence, and com- bines state-of-the-a
Summary of the content on the page No. 6
PLANET VIP-110/VIP-210 Web Configuration Guide trusion. The firewall policy offers VoIP administrators access control privilege choices to ap- ply to LAN users to restrict Internet access or prevent improper use. o Virtual Server, DMZ & Internet application capability With Virtual server, special applications, and DMZ features, the VIP-110/VIP-210 shares the LAN resources for Internet users, and provides various Internet application compatibility in a more convenient way. Package C
Summary of the content on the page No. 7
PLANET VIP-110/VIP-210 Web Configuration Guide VIP-210 Front Panel VIP-210 Rear Panel LED Display & Button Indicator Color Activity Indication PWR Green On Power is supplied to the gateway. CPU Green Blinking The system is running. (Heartbeat LED) LAN ACT Green On Data is presented on LAN. LNK Green On The gateway is connected to LAN. WAN ACT Green On Data is presented on WAN. LNK Green On The gateway is connected to WAN. PHONE/LINE Green Off The line is id
Summary of the content on the page No. 8
PLANET VIP-110/VIP-210 Web Configuration Guide Port Label Function RJ-45 LAN Connecting VIP to a 10/100 Mbps Ethernet network RJ-45 WAN Connecting VIP to a 10/100 Mbps Ethernet network / xDSL /Cable modem for Internet access RJ-11 Telephony Connect PBX Extension line/Telephone to VIP for voice communication Reset Button There is a push button located behind a small hole next to the PWR LED. This button allows you to reset VIP or force VIP to enter firmware upgrade mode. Rese
Summary of the content on the page No. 9
PLANET VIP-110/VIP-210 Web Configuration Guide Physical Installation and IP Configuration This chapter illustrates basic installation of VIP-110/VIP-210 Physical Installation Requirement • Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors. • TCP/IP protocol must be installed on all PCs. For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem (for WAN port usage) Procedure 1. Choose an Installation S
Summary of the content on the page No. 10
PLANET VIP-110/VIP-210 Web Configuration Guide 5. Check the LEDs • The PWR LED should be ON. • The CPU LED should flash. • For each LAN (PC) connection, the LAN LNK/ACT LED should be ON (provided the PC is also ON.) • The WAN LED should be ON. 6. Connecting to the telephony devices VIP-110/VIP-210 supports two types of telephony interfaces. One is FXO, and another is FXS. Each interface has two ports for connecting to telephony devices. FXS interface for connecting to regular analo
Summary of the content on the page No. 11
PLANET VIP-110/VIP-210 Web Configuration Guide Please locate your PC in the same network segment (192.168.0.x) of VIP-110/VIP-210. If you’re not familiar ëNote with TCP/IP, please refer to related chapter on user’s manual CD or consult your network administrator for proper network configurations. CLI configuration access: • You can connect the VIP-110/VIP-210 via telnet terminal program • Start up your terminal program, here, we use Hyper Terminal as the example.
Summary of the content on the page No. 12
PLANET VIP-110/VIP-210 Web Configuration Guide If you cannot get any response from the terminal program after strike “Enter” key several times. Please check the ëNote TCP/IP configurations of your computer, i.e. the des- tination VIP should be reachable by your PC. Then check the parameters above again. If all the network parameters are correctly configured, it is recommended to check if the network cabling is secure. LAN/WAN Interface quick configurations Nature of
Summary of the content on the page No. 13
PLANET VIP-110/VIP-210 Web Configuration Guide to set up the network mask to “255.255.255.0”, for example. You can have the command as below and press the key: ITG>net set lan mask 255.255.255.0 You’ll need to save the configured LAN IP address, network mask value into machine via command: net store , then insert command: net reset to reboot machine and make thechanges effective. Preparation before beginning web administration on VIP-110/VIP-210 In this section, we’l
Summary of the content on the page No. 14
PLANET VIP-110/VIP-210 Web Configuration Guide b. Double-click Protocol in the Select Network Component Type window, then the Select Network Protocol window appears. c. Choose Microsoft for the manufacturer. d. Choose TCP/IP for the network protocol. e. Click OK, and the Network window appears. Step 3.1 Change the TCP/IP settings to use DHCP as follows (DHCP environment): a. Double-click the first TCP/IP cable icon. The TCP/IP Properties window appears. b. Verify
Summary of the content on the page No. 15
PLANET VIP-110/VIP-210 Web Configuration Guide Step 5 Add the DNS server given to you by your ISP or network administrator: a. Click the DNS Configuration tab. b. Click Enable DNS. c. Enter your host name in the Host field. d. Enter your domain name in the Domain field. e. Enter the IP address of the DNS server in the DNS Server Search Order field. f. Click Add. The IP address displays in the window below the field. Step 5 Click OK, and
Summary of the content on the page No. 16
PLANET VIP-110/VIP-210 Web Configuration Guide Windows NT4.0 - TCP/IP a) Click the Properties button to see a screen like the one below. Windows NT4.0 - IP Address - 13 -
Summary of the content on the page No. 17
PLANET VIP-110/VIP-210 Web Configuration Guide b) Select the network card for your LAN. c) Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify an IP Address, as explained. Specify an IP Address If your PC is already configured with an IP address, check with your network administrator before making the following changes. a) The Default Gateway must be set to match your network environment. To set this: • Click the Advanced button on the screen ab
Summary of the content on the page No. 18
PLANET VIP-110/VIP-210 Web Configuration Guide Windows NT4.0 – DNS - 15 -
Summary of the content on the page No. 19
PLANET VIP-110/VIP-210 Web Configuration Guide Checking TCP/IP Settings - Windows 2000: Select Control Panel - Network and Dial-up Connection. a) Right - click the Local Area Connection icon and select Properties. You should see a screen like the following: Network Configuration (Win 2000) b) Select the TCP/IP protocol for your network card. c) Click on the Properties button. You should then see a screen like the following. - 16 -
Summary of the content on the page No. 20
PLANET VIP-110/VIP-210 Web Configuration Guide TCP/IP Properties (Win 2000) Ensure your TCP/IP settings are correct with one of the following description. Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Win- dows setting. If your networking environment is a DHCP environment, Using this option is recom- mended. Restart your PC to ensure it obtains an IP Address from DHCP server. Using a fixed IP Address ("Use the following IP Addr
